Flashing Error with SDK Manager

Hello,

15:23:18 INFO: Flash Jetson Xavier NX (Devkit) - flash: [ NV_L4T_FLASH_XAVIER_NX_DEVKIT_WITH_OS_IMAGE_COMP Install took 5s ]

15:23:18 ERROR: Flash Jetson Xavier NX (Devkit) - flash: [error]: : [exec_command]: /bin/bash -c /tmp/tmp_NV_L4T_FLASH_XAVIER_NX_DEVKIT_WITH_OS_IMAGE_COMP.sh; [error]:

15:23:18 ERROR: Flash Jetson Xavier NX (Devkit) - flash: command terminated with error

15:23:18 SUMMARY: Flash Jetson Xavier NX (Devkit) - flash: First Error: Installation failed.

What am I supposed to do?

Thank you.

Hi Hodu,

Please package the folder ~/.nvsdkm and attach it here, then we can analyze where the problem is.

1 Like

Hello,

nvsdkm.tar.gz (511.8 KB)

Thank you.

Hi Hodu,

In the log, we could see the following error message:

sudo ./flash.sh jetson-xavier-nx-devkit mmcblk0p1
###############################################################################
# L4T BSP Information:
# R32 , REVISION: 4.4
###############################################################################
Error: probing the target board failed.
       Make sure the target board is connected through 
       USB port and is in recovery mode.
Info: [ Component Install Finished with Error ]

Please make sure the target board is connected through USB port and is in recovery mode.

1 Like