<font style=

Hello,
How to modify the kernel source code to support TOSHIBA TC358748?
The driver is ok,but I don’t know the details how to modify the device tree.Please give me some tips.Isl79987 was used before,This is the information in the device tree about isl79987,the TC358748 how to modify the device tree specifically

plugin-manager {
    fragment-isl79987@0 {
        ids = "isl-*";
        override@0 {
            _overlay_ {
                 status = "okay";
            };
        };
        override@1 {
            target = <&cam_module0>;
            _overlay_ {
                 status = "okay";
                 badge = "isl79987_topleft_PSV27C";
                 position = "topleft";
                 orientation = "0";
             };
        };   
        override@2 {
            target = <&cam_module0_drivernode0>;
            _overlay_ {
                 status = "okay";
                 pcl_id = "v4l2_sensor";
                 devname = "isl79987 1-0044";
                 proc-device-tree = "/proc/device-tree/i2c@7000c400/isl79987_a@44";
             };
        };
        override@3 {
            target = <&cam_module0_drivernode1>;
            _overlay_ {
                 status = "okay";
                 pcl_id = "v4l2_focuser_stub";
             };
        };
        override@4 {
            target = <&vi_port0>;
            _overlay_ {
                 status = "okay";
             };
        };
        override@5 {
            target = <&isl79987_vi_in0>;
            _overlay_ {
                 status = "okay";
                 csi-port = <0>;
                 bus-width = <2>;
                 remote-endpoint = <&isl_isl79987_out0>;
             };
        };
        override@6 {
            target = <&tcp>;
            _overlay_ {
                 status = "okay";
                 num_csi_lanes = <2>;
                 max_pixel_rate = <160000>;
                 isp_peak_byte_per_pixel = <2>;
             };
        };
    };

};

Thank you very much