# GPIO24 not longer functional

**URL:** <https://forums.developer.nvidia.com/t/gpio24-not-longer-functional/384679>\
**Category:** Jetson AGX Orin\
**Tags:** gpio\
**Created:** [September 29, 2026, 11:53am UTC](https://forums.developer.nvidia.com/t/gpio24-not-longer-functional/384679 "2026-09-29T11:53:56Z")\
**Posts on this page:** 14\
**Page:** 1

<div class="post-metadata">

**Author:** ![matthias.wieland](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@matthias.wieland](https://forums.developer.nvidia.com/u/matthias.wieland)\
**Post date:** [September 29, 2026, 11:53am UTC](https://forums.developer.nvidia.com/t/gpio24-not-longer-functional/384679/1 "2026-09-29T11:53:57Z")

</div>

After startup, the GPIO suddenly stopped showing voltage (1) and now shows zero. Normally, 3.3 volts is present at the pin. It has now been discovered that 3.3V tolerance is disabled in the PINMUX. Could this cause the pin to fail, resulting in the loss of voltage? Is it mandatory to enable the 3.3V tolerance?

---

<div class="post-metadata">

**Author:** ![JerryChang](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/jerrychang/32/14043_2.png) [@JerryChang](https://forums.developer.nvidia.com/u/JerryChang)\
**Post date:** [September 30, 2026, 2:31am UTC](https://forums.developer.nvidia.com/t/gpio24-not-longer-functional/384679/4 "2026-09-30T02:31:19Z")

</div>

hello matthias.wieland,

may I double check which Jetpack release version you’re working with?  
and.. please refer to [40-pin Header](https://docs.nvidia.com/jetson/agx-orin-devkit/user-guide/latest/hardware_layout.html#pin-header), which pin you’ve the issue reported.

---

<div class="post-metadata">

**Author:** ![matthias.wieland](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@matthias.wieland](https://forums.developer.nvidia.com/u/matthias.wieland)\
**Post date:** [October 5, 2026, 9:42am UTC](https://forums.developer.nvidia.com/t/gpio24-not-longer-functional/384679/5 "2026-10-05T09:42:30Z")

</div>

I wanted to add following information. JETPACK Version is 6.2.1 and we don´t use the development kit but a custom board.

---

<div class="post-metadata">

**Author:** ![JerryChang](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/jerrychang/32/14043_2.png) [@JerryChang](https://forums.developer.nvidia.com/u/JerryChang)\
**Post date:** [October 6, 2026, 1:35am UTC](https://forums.developer.nvidia.com/t/gpio24-not-longer-functional/384679/6 "2026-10-06T01:35:13Z")

</div>

hello matthias.wieland,

please double check you’ve done pinmux configuration since it’s a customize board,  
see-also developer guide, [MB1 Configuration Changes](https://docs.nvidia.com/jetson/archives/r36.5.2/DeveloperGuide/HR/JetsonModuleAdaptationAndBringUp/JetsonOrinNxNanoSeries.html#mb1-configuration-changes).

BTW,  
GPIO24 maps to `GPIO3_PM.03`, you may see-also default pinmux configuration file.  
for instance, _$OUT/Linux\_for\_Tegra/bootloader/generic/BCT/tegra234-mb1-bct-pinmux-p3701-0000-a04.dtsi_

```auto
                        dp_aux_ch3_hpd_pm3 {
                                nvidia,pins = "dp_aux_ch3_hpd_pm3";
                                nvidia,function = "eth2";
                                nvidia,pull = <TEGRA_PIN_PULL_NONE>;
                                nvidia,tristate = <TEGRA_PIN_DISABLE>;
                                nvidia,enable-input = <TEGRA_PIN_ENABLE>;
                                nvidia,io-high-voltage = <TEGRA_PIN_DISABLE>;
                                nvidia,lpdr = <TEGRA_PIN_DISABLE>;

```

as you can see..  
that’s by default configured as SFIO with.. `nvidia,function = "eth2"`.  
it is not a GPIO output configured to drive high, and 3.3 V tolerance is already disabled by default.

---

<div class="post-metadata">

**Author:** ![matthias.wieland](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@matthias.wieland](https://forums.developer.nvidia.com/u/matthias.wieland)\
**Post date:** [October 6, 2026, 12:52pm UTC](https://forums.developer.nvidia.com/t/gpio24-not-longer-functional/384679/7 "2026-10-06T12:52:02Z")

</div>

Our pinmux configuration file looks like this:

dp\_aux\_ch3\_hpd\_pm3 {

```
            nvidia,pins = "dp_aux_ch3_hpd_pm3";

            nvidia,function = "rsvd1";

            nvidia,pull = <TEGRA_PIN_PULL_NONE>;

            nvidia,tristate = <TEGRA_PIN_ENABLE>;

            nvidia,enable-input = <TEGRA_PIN_ENABLE>;

            nvidia,io-high-voltage = <TEGRA_PIN_DISABLE>;

            nvidia,lpdr = <TEGRA_PIN_DISABLE>;

```

Does “nvidia,io-high-voltage” need to be set to “\<TEGRA\_PIN\_ENABLE\>” if 3.3 V is applied to this pin?

---

<div class="post-metadata">

**Author:** ![JerryChang](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/jerrychang/32/14043_2.png) [@JerryChang](https://forums.developer.nvidia.com/u/JerryChang)\
**Post date:** [October 7, 2026, 1:47am UTC](https://forums.developer.nvidia.com/t/gpio24-not-longer-functional/384679/8 "2026-10-07T01:47:15Z")

</div>

hello matthias.wieland,

you may give it a try to read this pin for details..

```auto
$ sudo busybox devmem 0x02440048
$ sudo cat /sys/kernel/debug/gpio | grep 'PM.03'
$ gpioinfo | grep 'PM.03'

```

> [@matthias.wieland](#):
>
> Does “nvidia,io-high-voltage” need to be set to “\<TEGRA\_PIN\_ENABLE\>” if 3.3 V is applied to this pin?

yes,  
if an external circuit applies 3.3 V directly to GPIO24 (i.e. PM.03), you should enable its 3.3 V tolerance with.. `nvidia,io-high-voltage = <TEGRA_PIN_ENABLE>;`.

BTW,  
you may share the connected circuit or the schematic for double check.

---

<div class="post-metadata">

**Author:** ![matthias.wieland](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@matthias.wieland](https://forums.developer.nvidia.com/u/matthias.wieland)\
**Post date:** [October 12, 2026, 11:27am UTC](https://forums.developer.nvidia.com/t/gpio24-not-longer-functional/384679/9 "2026-10-12T11:27:18Z")

</div>

Hello Jerry Chang,  
Thank you very much for the information. I have also attached the relevant section of the circuit diagram.

 ![GPIO24_IC52_StorageReset](https://global.discourse-cdn.com/nvidia/original/4X/1/e/4/1e408146ad3f4c3c9360b089725167fbd85c2bcd.jpeg)

---

<div class="post-metadata">

**Author:** ![matthias.wieland](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@matthias.wieland](https://forums.developer.nvidia.com/u/matthias.wieland)\
**Post date:** [October 16, 2026, 5:48am UTC](https://forums.developer.nvidia.com/t/gpio24-not-longer-functional/384679/11 "2026-10-16T05:48:23Z")

</div>

Hi JerryChang

could this circuit diagram be of any help.

Have you found a fault that is related to the problem?

Thanks for your help

---

<div class="post-metadata">

**Author:** ![JerryChang](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/jerrychang/32/14043_2.png) [@JerryChang](https://forums.developer.nvidia.com/u/JerryChang)\
**Post date:** [October 20, 2026, 2:45am UTC](https://forums.developer.nvidia.com/t/gpio24-not-longer-functional/384679/12 "2026-10-20T02:45:41Z")

</div>

hello matthias.wieland,

let me arrange hardware team to review your diagram for relevant section of the circuit diagram.

I would like to double check your issue,  
could you clarify how GPIO24 is connected and used on your custom board?  
for instance,  
– Is it an output intended to drive high, or an input receiving an external 3.3 V signal?  
– Where did you measure the voltage, and does it change from 3.3 V to 0 V during boot, or remain at 0 V since the issue first occurred?  
– What circuit is connected to the pin, including any pull-up resistor or external voltage source?  
– How do you configure and control/read the GPIO? Please share the commands or code and the corresponding GPIO configuration DTSI.

---

<div class="post-metadata">

**Author:** ![matthias.wieland](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@matthias.wieland](https://forums.developer.nvidia.com/u/matthias.wieland)\
**Post date:** [October 23, 2026, 7:17am UTC](https://forums.developer.nvidia.com/t/gpio24-not-longer-functional/384679/13 "2026-10-23T07:17:44Z")

</div>

Hello JerryChang

Thanks four your feedback and your efforts.

Here are my answers regarding the questions above:

– Is it an output intended to drive high, or an input receiving an external 3.3 V signal?

In the current configuration, it is an input receiving the external 3.3V signal.

– Where did you measure the voltage, and does it change from 3.3 V to 0 V during boot, or remain at 0 V since the issue first occurred?

It is 0 V from the beginning.

– What circuit is connected to the pin, including any pull-up resistor or external voltage source?

Shown in the previous post, this is the whole circuit on our board.

STORAGE\_RESET# is connected to the Reset Pin of two M.2 Storages

– How do you configure and control/read the GPIO? Please share the commands or code and the corresponding GPIO configuration DTSI.

We do not actively read the GPIO at the moment. It is a feature which might be used later.

---

<div class="post-metadata">

**Author:** ![matthias.wieland](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@matthias.wieland](https://forums.developer.nvidia.com/u/matthias.wieland)\
**Post date:** [November 2, 2026, 1:00pm UTC](https://forums.developer.nvidia.com/t/gpio24-not-longer-functional/384679/14 "2026-11-02T13:00:59Z")

</div>

> [@JerryChang](#):
>
> hello matthias.wieland,
> 
> let me arrange hardware team to review your diagram for relevant section of the circuit diagram.

Hello Jerry Chang,

I would like to kindly ask whether you have received any feedback from your hardware team regarding the circuit diagram yet.

Thanks in advance.

---

<div class="post-metadata">

**Author:** ![EricGggg](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/ericgggg/32/382649_2.png) [@EricGggg](https://forums.developer.nvidia.com/u/EricGggg)\
**Post date:** [November 13, 2026, 10:55pm UTC](https://forums.developer.nvidia.com/t/gpio24-not-longer-functional/384679/16 "2026-11-13T22:55:19Z")

</div>

On Jetson AGX Orin, GPIO pads are 1.8V by default. A pad tolerates 3.3V only when “3.3V Tolerance Enable” (E\_IO\_HV) is set in the pinmux, and only some pins support this option.

With a 3.3V pull-up and this option disabled, the pad is continuously over-voltage, which may damage it over time. We suspect this caused the GPIO24 failure.

It is a MUST to enable 3.3V tolerance in the pinmux when the pin is externally pulled up to 3.3V.

---

<div class="post-metadata">

**Author:** ![matthias.wieland](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@matthias.wieland](https://forums.developer.nvidia.com/u/matthias.wieland)\
**Post date:** [November 16, 2026, 6:56am UTC](https://forums.developer.nvidia.com/t/gpio24-not-longer-functional/384679/17 "2026-11-16T06:56:31Z")

</div>

Thank you very much for your information and your effort. Let me realize this information. If any problems will occur again I will come back to you.

---

<div class="post-metadata">

**Author:** ![matthias.wieland](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@matthias.wieland](https://forums.developer.nvidia.com/u/matthias.wieland)\
**Post date:** [November 17, 2026, 2:23pm UTC](https://forums.developer.nvidia.com/t/gpio24-not-longer-functional/384679/18 "2026-11-17T14:23:40Z")

</div>

One additional question came in my mind.

Due to the situation that the tolerance of 3,3V where not enabled could this lead to damage to adjacent pins?

In this case:

C51 GPIO24 and D52 GPIO27 (see schematic attached)

C51: this was the pin with the wrong config:

 ![image](https://global.discourse-cdn.com/nvidia/original/4X/c/3/e/c3e747d0186456b679dd67457db473c38682a7b9.jpeg)

D52: was also defective – it is the same unit – see following schematic

 ![image](https://global.discourse-cdn.com/nvidia/original/4X/2/5/8/2589711f86819772d218ff45412ce54870ed36c0.png)
