I’m hardware triggering 6 cameras and I’ve had to manually run the nvargus-daemon with infinite timeout enabled: sudo enableCamInfiniteTimeout=1 nvargus-daemon My use case is changing the framerate from 1 FPS to 30FPS during operation. It is 1 FPS for synchronisation and 30FPS after it is synchron…

hello Hommus, 2500ms is the basic timeout value for waiting frame-start, and then the whole pipeline could works normally. there isn’t a single timeout property, and some of them you cannot configured dynamically.

Hardware Triggering with enableCamInfiniteTimeout=1

Autonomous Machines Jetson & Embedded Systems Jetson Xavier NX

JerryChang March 14, 2023, 2:22am 14

hello Hommus,

to be precisely, it’s from Argus sending capture request till frame-start has arrived.

Set_mode_delay_ms property in R35 device-tree

ERROR: NULL VI channel received on AGX Xavier