Hi teams I want to configure SPI1 as a slave device in Xavier. The current configuration is shown in the figure below. How should I modify it [mmexport1597241475608] [mmexport1597241471958]

Something like below example connected -> SPI1_MOSI<-->SPI3_MISO, SPI1_CLK<-->SPI3_CLK, SP1_CS0 <--> SPI3_CS0 and SPI1_CS1->SPI3_CS1. SPI1 has to be configured as Master and SPI3 has to be configured as slave in the dt and pinmux settings have to be updated. SPI1 DT: spi@3210000 { st…

How to configure SPI1 as a slave?

Robotics & Edge Computing Jetson & Embedded Systems Jetson AGX Xavier

ShaneCCC August 13, 2020, 4:31am 5

Did you add it to the device tree?

Topic		Replies	Views
SPI can't work in slave mode on xavier? Jetson AGX Xavier spi	4	1917	October 18, 2021
Jetson TX1 - SPI Slave Mode Jetson TX1	7	1912	July 17, 2017
TX1 spi slave mode Jetson TX1	15	4094	September 4, 2019
SPI0 interface configured as a slave in Jetson Xavier NX Jetson Xavier NX spi , board-design	9	1411	June 7, 2023
SPI slave for L4T R28.1 Jetson TX1	10	3377	October 18, 2021
I want to config xavier spi as a slave device,how should I config it? Jetson AGX Xavier spi	3	561	October 31, 2022
How to use the spi on xavier Jetson AGX Xavier spi	8	3294	October 18, 2021
SPI Slave Jetson AGX Xavier	2	642	October 18, 2021
Enable SPI Slave mode for TX2 unde L4T R28.1 Jetson TX2	6	1856	July 25, 2018
How to configure SPI1 as a slave mode？ Jetson AGX Orin spi	2	1427	July 19, 2022

How to configure SPI1 as a slave?

Related topics