Hello, we have designed a custom carrier board for the Orin NX, and one of the camera interfaces is based on the Orin NX reference board’s 22-pin MIPI CSI interface. Now, we want to debug and check whether this MIPI interface is working correctly. We are looking to purchase a 4-channel CSI camera. Do you know how to find a 4-channel camera that is supported by Orin NX by default?
Checking with camera partner.
1 Like
I noticed that the tegra234-p3767-camera-p3768-imx477-dual-4lane.dts file contains a configuration for a 4-channel IMX477 camera. Could you please tell me the specific model of this 4-channel camera? A purchase link would be even better. I did a rough search for IMX477 cameras and only found 15-pin 2-channel models.
Current devkit only CAM1 support 4 lanes configuration like IMX477.
For the CAM0 due to HW design only support 2 lanes configuration.
Thank you for your reply, but it seems there was a misunderstanding. I am already familiar with the channel configuration for cam0 and cam1. In fact, we are using a custom carrier board, and one of the 22-pin interfaces on the board is designed to be compatible with cam1.
What I am really looking for is a 4-lane 22-pin camera that is compatible with Orin NX. Since there is a device tree and driver file for the 4-lane IMX477 camera on Orin NX, we want to know the specific model of this 4-lane IMX477 camera and whether it is available for purchase.
It’s PI High Quality Camera(IMX477) and driver able configuration 2 and 4 lanes mode.
https://www.raspberrypi.com/products/raspberry-pi-high-quality-camera/
1 Like
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.