# How to maximize bitrate on the jetson orin **URL:** \ **Category:** Jetson AGX Orin\ **Tags:** networking\ **Created:** [September 27, 2022, 1:47pm UTC](https://forums.developer.nvidia.com/t/how-to-maximize-bitrate-on-the-jetson-orin/229135 "2022-09-27T13:47:25Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![Andrey1984](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/andrey1984/32/14130_2.png) [@Andrey1984](https://forums.developer.nvidia.com/u/Andrey1984)\ **Post date:** [September 27, 2022, 1:47pm UTC](https://forums.developer.nvidia.com/t/how-to-maximize-bitrate-on-the-jetson-orin/229135/1 "2022-09-27T13:47:25Z")
from devs: “We are seeing on 3gbps on the orin 10g port” * * * Any solutions? ---
**Author:** ![kayccc](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/kayccc/32/14043_2.png) [@kayccc](https://forums.developer.nvidia.com/u/kayccc)\ **Post date:** [September 27, 2022, 11:12pm UTC](https://forums.developer.nvidia.com/t/how-to-maximize-bitrate-on-the-jetson-orin/229135/3 "2022-09-27T23:12:08Z")
Is it devkit or custom carrier board? On JetPack 5.0.2 GA release? ---
**Author:** ![Andrey1984](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/andrey1984/32/14130_2.png) [@Andrey1984](https://forums.developer.nvidia.com/u/Andrey1984)\ **Post date:** [September 27, 2022, 11:43pm UTC](https://forums.developer.nvidia.com/t/how-to-maximize-bitrate-on-the-jetson-orin/229135/4 "2022-09-27T23:43:31Z")
it is the devkit ---
**Author:** ![Andrey1984](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/andrey1984/32/14130_2.png) [@Andrey1984](https://forums.developer.nvidia.com/u/Andrey1984)\ **Post date:** [September 28, 2022, 2:35am UTC](https://forums.developer.nvidia.com/t/how-to-maximize-bitrate-on-the-jetson-orin/229135/5 "2022-09-28T02:35:30Z")
The devkit seems to have the original OS release. What LAN throughput is supported for 5.0.2 GA release with devkits? Is there a way to get a figure closer to 10gbps? similar issue here [10G ethernet testing of Jetson AGX Orin Developer Kit - #9 by \_av](https://forums.developer.nvidia.com/t/10g-ethernet-testing-of-jetson-agx-orin-developer-kit/227166/9) ---
**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\ **Post date:** [September 28, 2022, 3:16pm UTC](https://forums.developer.nvidia.com/t/how-to-maximize-bitrate-on-the-jetson-orin/229135/6 "2022-09-28T15:16:28Z")
The environment decides the result too. For example, if I connect two jetson Orin directly, set MTU size to 9000, then I can achieve 9.8Gbps … Thus, I cannot tell what you should try now. Maybe try with larger MTU size too. ---
**Author:** ![Andrey1984](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/andrey1984/32/14130_2.png) [@Andrey1984](https://forums.developer.nvidia.com/u/Andrey1984)\ **Post date:** [September 28, 2022, 3:20pm UTC](https://forums.developer.nvidia.com/t/how-to-maximize-bitrate-on-the-jetson-orin/229135/7 "2022-09-28T15:20:46Z")
like that? ` sudo ip link set dev eth0 mtu 9000` ---
**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\ **Post date:** [September 28, 2022, 3:21pm UTC](https://forums.developer.nvidia.com/t/how-to-maximize-bitrate-on-the-jetson-orin/229135/8 "2022-09-28T15:21:58Z")
Yes. ---
**Author:** ![Honey\_Patouceul](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/honey_patouceul/32/389777_2.png) [@Honey\_Patouceul](https://forums.developer.nvidia.com/u/Honey_Patouceul)\ **Post date:** [September 28, 2022, 6:19pm UTC](https://forums.developer.nvidia.com/t/how-to-maximize-bitrate-on-the-jetson-orin/229135/9 "2022-09-28T18:19:19Z")
Not 100% sure, but I think that further than both ends, any device in between if any would have to support Jumbo frames. Check from one end with: ```auto ping -M do -c 4 -s 8972 ``` Better start with direct connection as mentionned by @WayneWWW. ---
**Author:** ![Andrey1984](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/andrey1984/32/14130_2.png) [@Andrey1984](https://forums.developer.nvidia.com/u/Andrey1984)\ **Post date:** [October 3, 2022, 4:43am UTC](https://forums.developer.nvidia.com/t/how-to-maximize-bitrate-on-the-jetson-orin/229135/10 "2022-10-03T04:43:16Z")
can we can test orin 10g in loopback somehow? ---
**Author:** ![Honey\_Patouceul](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/honey_patouceul/32/389777_2.png) [@Honey\_Patouceul](https://forums.developer.nvidia.com/u/Honey_Patouceul)\ **Post date:** [October 4, 2022, 6:08pm UTC](https://forums.developer.nvidia.com/t/how-to-maximize-bitrate-on-the-jetson-orin/229135/11 "2022-10-04T18:08:25Z")
Well, I think I successfully experimented jumbo frames with lo interface. Default MTU size should be 65536. Not sure it is a good advice, not tried with recent L4T releases, no idea if it can break something, but with caution you may try reducing MTU to 9000 on lo and check if nothing bad happen. This would only test SW, going through ethernet HW may be different, though. ---
**Author:** ![Andrey1984](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/andrey1984/32/14130_2.png) [@Andrey1984](https://forums.developer.nvidia.com/u/Andrey1984)\ **Post date:** [October 26, 2022, 5:30am UTC](https://forums.developer.nvidia.com/t/how-to-maximize-bitrate-on-the-jetson-orin/229135/13 "2022-10-26T05:30:25Z")
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.