JetPack 4.6.4(R32.7.4), TX2i, custom board.
My device suddenly can’t boot up, here is boot log.
boot.log (22.3 KB)
It looks like the eMMC partition table corruption.
I found that flash.xml contains “primary_gpt”, but flash.sh seem unable to support this property.
sudo ./flash.sh -k primary_gpt jetson-tx2i mmcblk0p1
*** Update [primary_gpt] is not supported. ***
I also tried following, it can’t generate gpt.img.
sudo ./flash.sh -k GPT jetson-tx2i mmcblk0p1
[ 19.8340 ] File to be written cannot be of zero size, pFileName=/Linux_for_Tegra/bootloader/gpt.img
[ 19.8340 ]
Error: Return value 10
Command tegradevflash_v2 --write GPT /Linux_for_Tegra/bootloader/gpt.img
Failed to flash/read t186ref.
Was my command incorrect? I want to rebuild the eMMC partition table without full flash.
Is that possible? If so, please tell me how.