How to set to spi slave mode

[_JJANG]

SPI1 not work on Xavier

Please modify the pinmux for spi1 like spi2 does. file name: tegra19x-mb1-pinmux-p2888-0000-a04-p2822-0000-b01.cfg SPI1 pinmux.0x0243d040 = 0x00000055; # spi1_sck_pz3: rsvd1, pull-down, tristate-enable, input-enable, lpdr-disable pinmux.0x0243d020 = 0x00000055; # spi1_miso_pz4: rsvd1, pull-down, tristate-enable, input-enable, lpdr-disable pinmux.0x0243d058 = 0x00000055; # spi1_mosi_pz5: rsvd1, pull-down, tristate-enable, input-enable, lpdr-disable pinmux.0x0243d010 = 0x00000059; # spi1_cs0_pz6:…

Are jetson xaiver nx the same as the register value in this post?
Should I change the register values of spi1 and spi3 the same?