How to unbind USB 2.0 companion port from USB 3.0 port on Jetson platform

Dear NVIDIA Support Team,
We are currently developing a custom carrier board based on the Jetson Thor (T5000) platform. Due to our specific hardware pin multiplexing and routing constraints, we have a unique USB architecture requirements and would like to confirm its support and the correct software configuration.
Our Hardware Setup:
• SoC/Platform: Jetson Thor (T5000)
• Board Type: Custom Carrier Board
• Specific Requirement: We intend to use the usb3-2 port as a pure USB 3.0 / SuperSpeed-only port. On our board, this port is NOT paired or routed with any USB 2.0 companion port (D+/D- lanes are left unconnected or assigned to other peripheral functions).
Our Questions:

  1. Does the Jetson Thor (T5000) xHCI / xusb_padctl architecture natively support a pure USB 3.0 mode on usb3-2 without any USB 2.0 companion connection?
  2. What is the recommended Device Tree (DTS) implementation to completely decouple the USB 2.0 companion mapping for usb3-2 without breaking the overall xHCI controller initialization? (Should we simply remove the nvidia,usb2-companion property in xusb_padctl?)
  3. Are there any known hardware limitations, hardware strap settings, or power-on enumeration issues when running a USB 3.0 port without its USB 2.0 counterpart on this platform?
    We would highly appreciate any reference device tree snippets or app notes regarding pure USB 3.0 link implementation on Jetson Thor.

This design is not valid. USB3 must have USB2 as companion.