# I have a question about $ sudo nvpmodel -m 0 in several Jetson modules

**URL:** <https://forums.developer.nvidia.com/t/i-have-a-question-about-sudo-nvpmodel-m-0-in-several-jetson-modules/270071>\
**Category:** DeepStream SDK\
**Created:** [October 20, 2023, 5:34am UTC](https://forums.developer.nvidia.com/t/i-have-a-question-about-sudo-nvpmodel-m-0-in-several-jetson-modules/270071 "2023-10-20T05:34:26Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![sanzarak](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@sanzarak](https://forums.developer.nvidia.com/u/sanzarak)\
**Post date:** [October 20, 2023, 5:34am UTC](https://forums.developer.nvidia.com/t/i-have-a-question-about-sudo-nvpmodel-m-0-in-several-jetson-modules/270071/1 "2023-10-20T05:34:26Z")

</div>

\*\*• Hardware Platform : Jetson Nano, jetson Xavier NX, Jetson Orin NX, and Jetson AGX Orin  
\*\*• DeepStream Version : 6.2

* * *

I have installed DS6.2 on Jetson Nano, jetson Xavier NX, Jetson Orin NX, and Jetson AGX Orin.  
After installing DS6.2, I have a question before executing the following command at the end of the process.

$ sudo nvpmodel -m 0  
$ sudo jetson\_clocks

The instructions at [Quickstart Guide — DeepStream documentation](https://docs.nvidia.com/metropolis/deepstream/dev-guide/text/DS_Quickstart.html) say to do the following.

[Boost the clocks]  
After you have installed DeepStream SDK, run these commands on the Jetson device to boost the clocks:

## $ sudo nvpmodel -m 0 $ sudo jetson\_clocks

## Note For Jetson NX, run sudo nvpmodel -m 8 instead of 0.

Jetson NX says to do $sudo nvpmodel -m 8, but how do I give the nvpmodel -m (?) command for the rest of the devices (Jetson Nano, Jetson Orin NX, Jetson AGX Orin)?

$ sudo nvpmodel -m ? \<—

---

<div class="post-metadata">

**Author:** ![DaneLLL](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/danelll/32/14043_2.png) [@DaneLLL](https://forums.developer.nvidia.com/u/DaneLLL)\
**Post date:** [October 20, 2023, 6:53am UTC](https://forums.developer.nvidia.com/t/i-have-a-question-about-sudo-nvpmodel-m-0-in-several-jetson-modules/270071/4 "2023-10-20T06:53:18Z")

</div>

**There is no update from you for a period, assuming this is not an issue anymore. Hence we are closing this topic. If need further support, please open a new one. Thanks**

Hi,  
Please refer to the power modes listed in [developer guide](https://docs.nvidia.com/jetson/archives/l4t-archived/l4t-3274/index.html#page/Tegra%20Linux%20Driver%20Package%20Development%20Guide/power_management_jetson_xavier.html#wwpID0E0YO0HA)

The mode 8 of Xavier NX is 20W mode.

---

<div class="post-metadata">

**Author:** ![system](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/system/32/68080_2.png) [@system](https://forums.developer.nvidia.com/u/system)\
**Post date:** [November 7, 2023, 5:45am UTC](https://forums.developer.nvidia.com/t/i-have-a-question-about-sudo-nvpmodel-m-0-in-several-jetson-modules/270071/5 "2023-11-07T05:45:22Z")

</div>

Closed on November 7, 2023, 5:45am UTC

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.