Hello, I’m trying to make single version of ar0144 work with my EN715 carrier, Jetson Nano Developer Board. when I do media-ctl -p, I can see ar0144 is enabled… as seen from here: ~$ media-ctl -p Media controller API version 0.1.0 Media device information driver vi model NV…

I2c write reg failed!

Robotics & Edge Computing Jetson & Embedded Systems Jetson Nano

DaneLLL August 16, 2022, 7:37am 5

Hi,
Please check with AverMedia if EN715 supports ar0144. It looks like ar0144 is not powered on so the error is printed. Please check with board vendor if certain pins have to be set to GPIO pin for powering on the camera.

Topic		Replies	Views
No acknowledge from address, Jetson Nano 4gb with EN715 carrier Jetson Nano camera	6	481	August 24, 2022
Camer problem of I2C on Jetson Nano Carrier Board Jetson Nano camera , i2c	12	1664	October 15, 2021
How to setup camera device tree to use the J49 connector Jetson Nano camera , device-tree	9	944	December 15, 2021
rasberri pi V2.0 CSI Camera Jetson Nano	4	643	November 25, 2019
The Jetson nano turns on the 4K camera and the device restarts Jetson Nano camera	2	553	February 17, 2022
Jetson nano problem at add camera i2c with mipi port on L47 exception while registered to v4l2 Jetson Nano camera	16	669	July 21, 2023
OV5647 Driver Probing Failed (Cannot see it using i2cdetect) Jetson Nano camera	4	162	November 13, 2024
Jetson Nano I2C problem with access to the IR camera Jetson Nano i2c	20	2636	October 15, 2021
OV2740 for jetson nano Jetson Nano camera	18	1775	November 24, 2021
Camera I2C not probed Jetson Nano camera	13	737	October 15, 2021

I2c write reg failed!

Related topics