Hi Wayne,
I ran through all the steps in the other thread and the board seems to flash successfully now but still won’t boot. I also added the line you asked me to above. See below for Terminal output from flashing, UART output from booting and UART output from flashing:
TSON_NANO/Linux_for_Tegra$ sudo ./flash.sh jetson-nano-emmc mmcblk0p1
###############################################################################
L4T BSP Information:
R32 , REVISION: 3.1
###############################################################################
Target Board Information:
Name: jetson-nano-emmc, Board Family: t210ref, SoC: Tegra 210,
OpMode: production, Boot Authentication: ,
###############################################################################
Board ID(3448) version(400)
copying bctfile(/home/james/nvidia/nvidia_sdk/JetPack_4.3_Linux_JETSON_NANO/Linux_for_Tegra/bootloader/t210ref/BCT/P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.cfg)… done.
copying bootloader(/home/james/nvidia/nvidia_sdk/JetPack_4.3_Linux_JETSON_NANO/Linux_for_Tegra/bootloader/t210ref/cboot.bin)… done.
copying initrd(/home/james/nvidia/nvidia_sdk/JetPack_4.3_Linux_JETSON_NANO/Linux_for_Tegra/bootloader/l4t_initrd.img)… done.
populating kernel to rootfs… done.
populating initrd to rootfs… done.
populating /home/james/nvidia/nvidia_sdk/JetPack_4.3_Linux_JETSON_NANO/Linux_for_Tegra/kernel/dtb/tegra210-p3448-0000-p3449-0000-b00.dtb to rootfs… done.
Making Boot image… done.
copying bcffile(/home/james/nvidia/nvidia_sdk/JetPack_4.3_Linux_JETSON_NANO/Linux_for_Tegra/bootloader/t210ref/cfg/board_config_p3448.xml)… done.
Existing sosfile(/home/james/nvidia/nvidia_sdk/JetPack_4.3_Linux_JETSON_NANO/Linux_for_Tegra/bootloader/nvtboot_recovery.bin) reused.
copying tegraboot(/home/james/nvidia/nvidia_sdk/JetPack_4.3_Linux_JETSON_NANO/Linux_for_Tegra/bootloader/t210ref/nvtboot.bin)… done.
copying cpu_bootloader(/home/james/nvidia/nvidia_sdk/JetPack_4.3_Linux_JETSON_NANO/Linux_for_Tegra/bootloader/t210ref/cboot.bin)… done.
copying bpffile(/home/james/nvidia/nvidia_sdk/JetPack_4.3_Linux_JETSON_NANO/Linux_for_Tegra/bootloader/t210ref/sc7entry-firmware.bin)… done.
Existing badpagefile(/home/james/nvidia/nvidia_sdk/JetPack_4.3_Linux_JETSON_NANO/Linux_for_Tegra/bootloader/badpage.bin) reused.
copying wb0boot(/home/james/nvidia/nvidia_sdk/JetPack_4.3_Linux_JETSON_NANO/Linux_for_Tegra/bootloader/t210ref/warmboot.bin)… done.
Existing tosfile(/home/james/nvidia/nvidia_sdk/JetPack_4.3_Linux_JETSON_NANO/Linux_for_Tegra/bootloader/tos-mon-only.img) reused.
Existing eksfile(/home/james/nvidia/nvidia_sdk/JetPack_4.3_Linux_JETSON_NANO/Linux_for_Tegra/bootloader/eks.img) reused.
copying dtbfile(/home/james/nvidia/nvidia_sdk/JetPack_4.3_Linux_JETSON_NANO/Linux_for_Tegra/kernel/dtb/tegra210-p3448-0000-p3449-0000-b00.dtb)… done.
Copying nv_boot_control.conf to rootfs
Making system.img…
populating rootfs from /home/james/nvidia/nvidia_sdk/JetPack_4.3_Linux_JETSON_NANO/Linux_for_Tegra/rootfs … done.
Sync’ing system.img … done.
Converting RAW image to Sparse image…
---- Raw to Sparse Image Converter v1.0 ----------------------------
0: RAW: 8388608( 8 blks) ==> 28:8388620
1: SKP: 29360128( 28 blks) ==> 8388648:12
2: RAW: 12582912( 12 blks) ==> 8388660:12582924
3: SKP: 83886080( 80 blks) ==> 20971584:12
4: RAW: 1048576( 1 blks) ==> 20971596:1048588
5: SKP: 3145728( 3 blks) ==> 22020184:12
6: RAW: 27262976( 26 blks) ==> 22020196:27262988
7: SKP: 1048576( 1 blks) ==> 49283184:12
8: RAW: 169869312( 162 blks) ==> 49283196:169869324
9: SKP: 15728640( 15 blks) ==> 219152520:12
10: RAW: 51380224( 49 blks) ==> 219152532:51380236
11: SKP: 3145728( 3 blks) ==> 270532768:12
12: RAW: 256901120( 245 blks) ==> 270532780:256901132
13: SKP: 7340032( 7 blks) ==> 527433912:12
14: RAW: 1048576( 1 blks) ==> 527433924:1048588
15: SKP: 3145728( 3 blks) ==> 528482512:12
16: RAW: 1048576( 1 blks) ==> 528482524:1048588
17: SKP: 3145728( 3 blks) ==> 529531112:12
18: RAW: 15728640( 15 blks) ==> 529531124:15728652
19: SKP: 1048576( 1 blks) ==> 545259776:12
20: RAW: 89128960( 85 blks) ==> 545259788:89128972
21: SKP: 3145728( 3 blks) ==> 634388760:12
22: RAW: 20971520( 20 blks) ==> 634388772:20971532
23: SKP: 1048576( 1 blks) ==> 655360304:12
24: RAW: 121634816( 116 blks) ==> 655360316:121634828
25: SKP: 7340032( 7 blks) ==> 776995144:12
26: RAW: 1048576( 1 blks) ==> 776995156:1048588
27: SKP: 3145728( 3 blks) ==> 778043744:12
28: RAW: 36700160( 35 blks) ==> 778043756:36700172
29: SKP: 1048576( 1 blks) ==> 814743928:12
30: RAW: 22020096( 21 blks) ==> 814743940:22020108
31: SKP: 3145728( 3 blks) ==> 836764048:12
32: RAW: 72351744( 69 blks) ==> 836764060:72351756
33: SKP: 3145728( 3 blks) ==> 909115816:12
34: RAW: 38797312( 37 blks) ==> 909115828:38797324
35: SKP: 3145728( 3 blks) ==> 947913152:12
36: RAW: 84934656( 81 blks) ==> 947913164:84934668
37: SKP: 3145728( 3 blks) ==> 1032847832:12
38: RAW: 1048576( 1 blks) ==> 1032847844:1048588
39: SKP: 3145728( 3 blks) ==> 1033896432:12
40: RAW: 82837504( 79 blks) ==> 1033896444:82837516
41: SKP: 1048576( 1 blks) ==> 1116733960:12
42: RAW: 23068672( 22 blks) ==> 1116733972:23068684
43: SKP: 2097152( 2 blks) ==> 1139802656:12
44: RAW: 106954752( 102 blks) ==> 1139802668:106954764
45: SKP: 2097152( 2 blks) ==> 1246757432:12
46: RAW: 29360128( 28 blks) ==> 1246757444:29360140
47: SKP: 4194304( 4 blks) ==> 1276117584:12
48: RAW: 70254592( 67 blks) ==> 1276117596:70254604
49: SKP: 1048576( 1 blks) ==> 1346372200:12
50: RAW: 28311552( 27 blks) ==> 1346372212:28311564
51: SKP: 1048576( 1 blks) ==> 1374683776:12
52: RAW: 24117248( 23 blks) ==> 1374683788:24117260
53: SKP: 1048576( 1 blks) ==> 1398801048:12
54: RAW: 33554432( 32 blks) ==> 1398801060:33554444
55: SKP: 1048576( 1 blks) ==> 1432355504:12
56: RAW: 65011712( 62 blks) ==> 1432355516:65011724
57: SKP: 1048576( 1 blks) ==> 1497367240:12
58: RAW: 12582912( 12 blks) ==> 1497367252:12582924
59: SKP: 4194304( 4 blks) ==> 1509950176:12
60: RAW: 25165824( 24 blks) ==> 1509950188:25165836
61: SKP: 8388608( 8 blks) ==> 1535116024:12
62: RAW: 18874368( 18 blks) ==> 1535116036:18874380
63: SKP: 383778816( 366 blks) ==> 1553990416:12
64: RAW: 6291456( 6 blks) ==> 1553990428:6291468
65: SKP: 27262976( 26 blks) ==> 1560281896:12
66: RAW: 11534336( 11 blks) ==> 1560281908:11534348
67: SKP: 89128960( 85 blks) ==> 1571816256:12
68: RAW: 149946368( 143 blks) ==> 1571816268:149946380
69: SKP: 923795456( 881 blks) ==> 1721762648:12
70: RAW: 1048576( 1 blks) ==> 1721762660:1048588
71: SKP: 267386880( 255 blks) ==> 1722811248:12
72: RAW: 1048576( 1 blks) ==> 1722811260:1048588
73: SKP: 670040064( 639 blks) ==> 1723859848:12
74: RAW: 7340032( 7 blks) ==> 1723859860:7340044
75: SKP: 26214400( 25 blks) ==> 1731199904:12
76: RAW: 10485760( 10 blks) ==> 1731199916:10485772
77: SKP: 90177536( 86 blks) ==> 1741685688:12
78: RAW: 310378496( 296 blks) ==> 1741685700:310378508
79: SKP: 1702887424( 1624 blks) ==> 2052064208:12
80: RAW: 7340032( 7 blks) ==> 2052064220:7340044
81: SKP: 26214400( 25 blks) ==> 2059404264:12
82: RAW: 16777216( 16 blks) ==> 2059404276:16777228
83: SKP: 83886080( 80 blks) ==> 2076181504:12
84: RAW: 1048576( 1 blks) ==> 2076181516:1048588
85: SKP: 3145728( 3 blks) ==> 2077230104:12
86: RAW: 1225785344( 1169 blks) ==> 2077230116:1225785356
87: SKP: 783286272( 747 blks) ==> 3303015472:12
88: RAW: 5242880( 5 blks) ==> 3303015484:5242892
89: SKP: 28311552( 27 blks) ==> 3308258376:12
90: RAW: 16777216( 16 blks) ==> 3308258388:16777228
91: SKP: 83886080( 80 blks) ==> 3325035616:12
92: RAW: 332398592( 317 blks) ==> 3325035628:332398604
93: SKP: 1680867328( 1603 blks) ==> 3657434232:12
94: RAW: 5242880( 5 blks) ==> 3657434244:5242892
95: SKP: 28311552( 27 blks) ==> 3662677136:12
96: RAW: 12582912( 12 blks) ==> 3662677148:12582924
97: SKP: 88080384( 84 blks) ==> 3675260072:12
98: RAW: 1048576( 1 blks) ==> 3675260084:1048588
99: SKP: 3145728( 3 blks) ==> 3676308672:12
100: RAW: 289406976( 276 blks) ==> 3676308684:289406988
101: SKP: 1048576( 1 blks) ==> 3965715672:12
102: RAW: 10485760( 10 blks) ==> 3965715684:10485772
103: SKP: 1048576( 1 blks) ==> 3976201456:12
104: RAW: 59768832( 57 blks) ==> 3976201468:59768844
105: SKP: 1048576( 1 blks) ==> 4035970312:12
106: RAW: 164626432( 157 blks) ==> 4035970324:164626444
107: SKP: 1481637888( 1413 blks) ==> 4200596768:12
108: RAW: 8388608( 8 blks) ==> 4200596780:8388620
109: SKP: 25165824( 24 blks) ==> 4208985400:12
110: RAW: 13631488( 13 blks) ==> 4208985412:13631500
111: SKP: 87031808( 83 blks) ==> 4222616912:12
112: RAW: 296747008( 283 blks) ==> 4222616924:296747020
113: SKP: 1716518912( 1637 blks) ==> 4519363944:12
– Total: ---------------------------------------------------
114 CHUNK 15032385536( 14336 blks) ==> 4519363956(4310 blks)
done.
system.img built successfully.
Existing tbcfile(/home/james/nvidia/nvidia_sdk/JetPack_4.3_Linux_JETSON_NANO/Linux_for_Tegra/bootloader/nvtboot_cpu.bin) reused.
copying tbcdtbfile(/home/james/nvidia/nvidia_sdk/JetPack_4.3_Linux_JETSON_NANO/Linux_for_Tegra/kernel/dtb/tegra210-p3448-0000-p3449-0000-b00.dtb)… done.
copying cfgfile(/home/james/nvidia/nvidia_sdk/JetPack_4.3_Linux_JETSON_NANO/Linux_for_Tegra/bootloader/t210ref/cfg/flash_l4t_t210_emmc_p3448.xml) to flash.xml… done.
copying flasher(/home/james/nvidia/nvidia_sdk/JetPack_4.3_Linux_JETSON_NANO/Linux_for_Tegra/bootloader/t210ref/cboot.bin)… done.
Existing flashapp(/home/james/nvidia/nvidia_sdk/JetPack_4.3_Linux_JETSON_NANO/Linux_for_Tegra/bootloader/tegraflash.py) reused.
./tegraflash.py --bl cboot.bin --bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.cfg --odmdata 0x94000 --bldtb tegra210-p3448-0000-p3449-0000-b00.dtb --applet nvtboot_recovery.bin --boardconfig board_config_p3448.xml --cmd “flash; reboot” --cfg flash.xml --chip 0x21 --skipuid --bins “EBT cboot.bin; DTB tegra210-p3448-0000-p3449-0000-b00.dtb”
saving flash command in /home/james/nvidia/nvidia_sdk/JetPack_4.3_Linux_JETSON_NANO/Linux_for_Tegra/bootloader/flashcmd.txt
saving Windows flash command to /home/james/nvidia/nvidia_sdk/JetPack_4.3_Linux_JETSON_NANO/Linux_for_Tegra/bootloader/flash_win.bat
*** Flashing target device started. ***
Welcome to Tegra Flash
version 1.0.0
Type ? or help for help and q or quit to exit
Use ! to execute system commands
[ 0.0275 ] tegrasign --key None --getmode mode.txt
[ 0.0297 ] Assuming zero filled SBK key
[ 0.0483 ]
[ 0.0484 ] Generating RCM messages
[ 0.0699 ] tegrarcm --listrcm rcm_list.xml --chip 0x21 0 --download rcm nvtboot_recovery.bin 0 0
[ 0.0719 ] RCM 0 is saved as rcm_0.rcm
[ 0.1134 ] RCM 1 is saved as rcm_1.rcm
[ 0.1140 ] List of rcm files are saved in rcm_list.xml
[ 0.1143 ]
[ 0.1143 ] Signing RCM messages
[ 0.1164 ] tegrasign --key None --list rcm_list.xml --pubkeyhash pub_key.key
[ 0.1180 ] Assuming zero filled SBK key
[ 0.1292 ]
[ 0.1293 ] Copying signature to RCM mesages
[ 0.1310 ] tegrarcm --chip 0x21 0 --updatesig rcm_list_signed.xml
[ 0.1334 ]
[ 0.1334 ] Parsing partition layout
[ 0.1651 ] tegraparser --pt flash.xml.tmp
[ 0.1777 ]
[ 0.1778 ] Creating list of images to be signed
[ 0.1980 ] tegrahost --chip 0x21 0 --partitionlayout flash.xml.bin --list images_list.xml
[ 0.2794 ]
[ 0.2795 ] Generating signatures
[ 0.2813 ] tegrasign --key None --list images_list.xml --pubkeyhash pub_key.key
[ 0.2827 ] Assuming zero filled SBK key
[ 0.4506 ]
[ 0.4507 ] Generating br-bct
[ 0.5084 ] tegrabct --bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.cfg --chip 0x21 0
[ 0.5102 ] Copying Sdram info from 0 to 1 set
[ 0.5355 ] Copying Sdram info from 1 to 2 set
[ 0.5361 ] Copying Sdram info from 2 to 3 set
[ 0.5450 ]
[ 0.5451 ] Updating boot device parameters
[ 0.5467 ] tegrabct --bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct --chip 0x21 0 --updatedevparam flash.xml.bin
[ 0.5485 ] Warning: No sdram params
[ 0.5577 ]
[ 0.5578 ] Updating bl info
[ 0.5596 ] tegrabct --bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct --chip 0x21 0 --updateblinfo flash.xml.bin --updatesig images_list_signed.xml
[ 0.5623 ]
[ 0.5624 ] Updating secondary storage information into bct
[ 0.5640 ] tegraparser --pt flash.xml.bin --chip 0x21 0 --updatecustinfo P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct
[ 0.5660 ]
[ 0.5661 ] Updating board information from board config into bct
[ 0.5705 ] tegraparser --boardconfig board_config_p3448.xml --chip 0x21 0 --updatecustinfo P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct
[ 0.5885 ]
[ 0.5886 ] Updating Odmdata
[ 0.5904 ] tegrabct --bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct --chip 0x21 0 --updatefields Odmdata =0x94000
[ 0.5924 ] Warning: No sdram params
[ 0.5927 ]
[ 0.5928 ] Get Signed section of bct
[ 0.5943 ] tegrabct --bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct --chip 0x21 0 --listbct bct_list.xml
[ 0.5961 ]
[ 0.5967 ] Signing BCT
[ 0.6004 ] tegrasign --key None --list bct_list.xml --pubkeyhash pub_key.key
[ 0.6033 ] Assuming zero filled SBK key
[ 0.6050 ]
[ 0.6050 ] Updating BCT with signature
[ 0.6067 ] tegrabct --bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct --chip 0x21 0 --updatesig bct_list_signed.xml
[ 0.6088 ]
[ 0.6089 ] Copying signatures
[ 0.6106 ] tegrahost --chip 0x21 0 --partitionlayout flash.xml.bin --updatesig images_list_signed.xml
[ 0.6310 ]
[ 0.6312 ] Updating BFS information on BCT
[ 0.6332 ] tegrabct --bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct --chip 0x21 0 --updatebfsinfo flash.xml.bin
[ 0.6353 ] BFS:
[ 0.6391 ] 0: [PT ] flash.xml.bin (size=4337/131072)
[ 0.6423 ] 1: [TBC] nvtboot_cpu.bin.encrypt (size=65760/196608)
[ 0.6454 ] 2: [RP1] tegra210-p3448-0000-p3449-0000-b00.dtb.encrypt (size=215840/1048576)
[ 0.6512 ] 3: [EBT] cboot.bin.encrypt (size=484304/655360)
[ 0.6543 ] 4: [WB0] warmboot.bin.encrypt (size=3952/131072)
[ 0.6575 ] 5: [BPF] sc7entry-firmware.bin.encrypt (size=3376/262144)
[ 0.6623 ] BFS0: 131072 @ 2560 SUM 7c00a770 over 2883584 bytes
[ 0.6651 ] BFS:
[ 0.6738 ] 0: [PT-1] flash.xml.bin (size=4337/131072)
[ 0.6861 ] 1: [TBC-1] nvtboot_cpu.bin.encrypt (size=65760/196608)
[ 0.6945 ] 2: [RP1-1] tegra210-p3448-0000-p3449-0000-b00.dtb.encrypt (size=215840/1048576)
[ 0.7073 ] 3: [EBT-1] cboot.bin.encrypt (size=484304/655360)
[ 0.7085 ] 4: [WB0-1] warmboot.bin.encrypt (size=3952/131072)
[ 0.7092 ] 5: [BPF-1] sc7entry-firmware.bin.encrypt (size=3376/262144)
[ 0.7111 ] BFS1: 131072 @ 8704 SUM 7c00a770 over 2883584 bytes
[ 0.7140 ] KFS:
[ 0.7441 ] 0: [DTB] tegra210-p3448-0000-p3449-0000-b00.dtb.encrypt (size=215840/1048576)
[ 0.7452 ] 1: [TOS] tos-mon-only.img.encrypt (size=54208/6291456)
[ 0.7461 ] 2: [EKS] eks.img (size=1028/81920)
[ 0.7571 ] 3: [LNX] boot.img.encrypt (size=483328/67092480)
[ 0.7584 ] KFS0: 1048576 @ 29376546 SUM 2bb72787 over 7905280 bytes
[ 0.7664 ] KFS:
[ 0.8245 ] 0: [DTB-1] tegra210-p3448-0000-p3449-0000-b00.dtb.encrypt (size=215840/1048576)
[ 0.8260 ] 1: [TOS-1] tos-mon-only.img.encrypt (size=54208/6291456)
[ 0.8269 ] 2: [EKS-1] eks.img (size=1028/81920)
[ 0.8274 ] 3: [LNX-1] boot.img.encrypt (size=483328/67092480)
[ 0.8280 ] KFS1: 1048576 @ 29522082 SUM 2bb72787 over 7905280 bytes
[ 0.8364 ]
[ 0.8365 ] Boot Rom communication
[ 0.8385 ] tegrarcm --chip 0x21 0 --rcm rcm_list_signed.xml --skipuid
[ 0.8398 ] RCM version 0X210001
[ 1.1641 ] Boot Rom communication completed
[ 2.1742 ]
[ 2.1743 ] Sending BCTs
[ 2.1768 ] tegrarcm --download bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct
[ 2.1790 ] Applet version 00.01.0000
[ 2.4638 ] Sending bct
[ 2.4644 ] […] 100%
[ 2.7742 ]
[ 2.7793 ] tegrahost --chip 0x21 --align cboot.bin
[ 2.7815 ]
[ 2.7832 ] tegrahost --magicid EBT --appendsigheader cboot.bin cboot.bin_blheader
[ 2.7889 ]
[ 2.7916 ] tegrasign --key None --list cboot.bin_list.xml
[ 2.7933 ] Assuming zero filled SBK key
[ 2.8201 ]
[ 2.8223 ] tegrahost --updatesigheader cboot.bin_blheader.encrypt cboot.bin_blheader.hash zerosbk
[ 2.8329 ]
[ 2.8372 ] tegrahost --chip 0x21 --align tegra210-p3448-0000-p3449-0000-b00.dtb
[ 2.8389 ]
[ 2.8404 ] tegrahost --magicid DTB --appendsigheader tegra210-p3448-0000-p3449-0000-b00.dtb tegra210-p3448-0000-p3449-0000-b00.dtb_blheader
[ 2.8432 ]
[ 2.8452 ] tegrasign --key None --list tegra210-p3448-0000-p3449-0000-b00.dtb_list.xml
[ 2.8467 ] Assuming zero filled SBK key
[ 2.8621 ]
[ 2.8681 ] tegrahost --updatesigheader tegra210-p3448-0000-p3449-0000-b00.dtb_blheader.encrypt tegra210-p3448-0000-p3449-0000-b00.dtb_blheader.hash zerosbk
[ 2.8706 ]
[ 2.8714 ] Sending bootloader and pre-requisite binaries
[ 2.8730 ] tegrarcm --download ebt cboot.bin.encrypt 0 0 --download rp1 tegra210-p3448-0000-p3449-0000-b00.dtb.encrypt 0
[ 2.8744 ] Applet version 00.01.0000
[ 3.1634 ] Sending ebt
[ 3.1647 ] […] 100%
[ 3.2771 ] Sending rp1
[ 3.2812 ] […] 100%
[ 3.3373 ]
[ 3.3391 ] tegrarcm --boot recovery
[ 3.3403 ] Applet version 00.01.0000
[ 3.6292 ]
[ 3.6293 ] Retrieving storage infomation
[ 3.6313 ] tegrarcm --oem platformdetails storage storage_info.bin
[ 3.6330 ] Applet is not running on device. Continue with Bootloader
[ 4.9258 ]
[ 4.9574 ] tegradevflash --oem platformdetails storage storage_info.bin
[ 4.9592 ] Cboot version 00.01.0000
[ 5.1076 ] Saved platform info in storage_info.bin
[ 5.1120 ]
[ 5.1123 ] Flashing the device
[ 5.1166 ] tegradevflash --pt flash.xml.bin --storageinfo storage_info.bin --create
[ 5.1199 ] Cboot version 00.01.0000
[ 5.2717 ] Writing partition GPT with gpt.bin
[ 5.2732 ] […] 100%
[ 5.2808 ] Writing partition NVC with nvtboot.bin.encrypt
[ 5.9751 ] […] 100%
[ 5.9882 ] Writing partition PT with flash.xml.bin
[ 6.0126 ] […] 100%
[ 6.0185 ] Writing partition TBC with nvtboot_cpu.bin.encrypt
[ 6.0438 ] […] 100%
[ 6.0633 ] Writing partition RP1 with tegra210-p3448-0000-p3449-0000-b00.dtb.encrypt
[ 6.1148 ] […] 100%
[ 6.1416 ] Writing partition EBT with cboot.bin.encrypt
[ 6.1923 ] […] 100%
[ 6.2329 ] Writing partition WB0 with warmboot.bin.encrypt
[ 6.2882 ] […] 100%
[ 6.3109 ] Writing partition BPF with sc7entry-firmware.bin.encrypt
[ 6.3578 ] […] 100%
[ 6.3755 ] Writing partition NVC-1 with nvtboot.bin.encrypt
[ 6.4237 ] […] 100%
[ 6.4492 ] Writing partition PT-1 with flash.xml.bin
[ 6.5111 ] […] 100%
[ 6.5297 ] Writing partition TBC-1 with nvtboot_cpu.bin.encrypt
[ 6.5918 ] […] 100%
[ 6.6120 ] Writing partition RP1-1 with tegra210-p3448-0000-p3449-0000-b00.dtb.encrypt
[ 6.6777 ] […] 100%
[ 6.7023 ] Writing partition EBT-1 with cboot.bin.encrypt
[ 6.7645 ] […] 100%
[ 6.8047 ] Writing partition WB0-1 with warmboot.bin.encrypt
[ 6.8728 ] […] 100%
[ 6.8919 ] Writing partition BPF-1 with sc7entry-firmware.bin.encrypt
[ 6.9534 ] […] 100%
[ 6.9706 ] Writing partition VER_b with emmc_bootblob_ver.txt
[ 7.0329 ] […] 100%
[ 7.0513 ] Writing partition VER with emmc_bootblob_ver.txt
[ 7.1038 ] […] 100%
[ 7.1206 ] Writing partition APP with system.img
[ 7.1711 ] […] 100%
[ 284.0721 ] Writing partition DTB with tegra210-p3448-0000-p3449-0000-b00.dtb.encrypt
[ 284.5864 ] […] 100%
[ 284.6062 ] Writing partition TOS with tos-mon-only.img.encrypt
[ 284.6449 ] […] 100%
[ 284.6591 ] Warning: EKS partition magic header mismatch!
[ 284.7043 ] Writing partition EKS with eks.img
[ 284.7048 ] […] 100%
[ 284.7172 ] Writing partition LNX with boot.img.encrypt
[ 284.7552 ] […] 100%
[ 284.7886 ] Writing partition DTB-1 with tegra210-p3448-0000-p3449-0000-b00.dtb.encrypt
[ 284.8198 ] […] 100%
[ 284.8435 ] Writing partition TOS-1 with tos-mon-only.img.encrypt
[ 284.8841 ] […] 100%
[ 284.8963 ] Writing partition EKS-1 with eks.img
[ 284.9333 ] […] 100%
[ 284.9448 ] Writing partition LNX-1 with boot.img.encrypt
[ 284.9814 ] […] 100%
[ 285.0150 ] Writing partition BMP with bmp.blob
[ 285.0485 ] […] 100%
[ 285.0785 ] Writing partition RP4 with rp4.blob
[ 285.1253 ] […] 100%
[ 285.1948 ]
[ 285.2071 ] tegradevflash --write BCT P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct
[ 285.2096 ] Cboot version 00.01.0000
[ 285.3636 ] Writing partition BCT with P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct
[ 285.3665 ] […] 100%
[ 285.7773 ]
[ 285.7773 ] Flashing completed
[ 285.7774 ] Coldbooting the device
[ 285.7805 ] tegradevflash --reboot coldboot
[ 285.7849 ] Cboot version 00.01.0000
[ 285.9278 ]
*** The target t210ref has been flashed successfully. ***
Reset the board to boot from internal eMMC.
UART output from booting:
[0000.212] [TegraBoot] (version 00.00.2018.01-l4t-168a2aaa)
[0000.218] Processing in cold boot mode Bootloader 2
[0000.222] A02 Bootrom Patch rev = 1023
[0000.226] Power-up reason: pmc por
[0000.229] No Battery Present
[0000.232] pmic max77620 reset reason
[0000.235] pmic max77620 NVERC : 0x40
[0000.238] RamCode = 0
[0000.241] Platform has DDR4 type RAM
[0000.244] max77620 disabling SD1 Remote Sense
[0000.248] Setting DDR voltage to 1125mv
[0000.252] Serial Number of Pmic Max77663: 0x634d9
[0000.260] Entering ramdump check
[0000.263] Get RamDumpCarveOut = 0x0
[0000.266] RamDumpCarveOut=0x0, RamDumperFlag=0xe59ff3f8
[0000.271] Last reboot was clean, booting normally!
[0000.276] Sdram initialization is successful
[0000.280] SecureOs Carveout Base=0x00000000ff800000 Size=0x00800000
[0000.286] Lp0 Carveout Base=0x00000000ff780000 Size=0x00001000
[0000.292] BpmpFw Carveout Base=0x00000000ff700000 Size=0x00080000
[0000.298] GSC1 Carveout Base=0x00000000ff600000 Size=0x00100000
[0000.303] GSC2 Carveout Base=0x00000000ff500000 Size=0x00100000
[0000.309] GSC4 Carveout Base=0x00000000ff400000 Size=0x00100000
[0000.315] GSC5 Carveout Base=0x00000000ff300000 Size=0x00100000
[0000.321] GSC3 Carveout Base=0x000000017f300000 Size=0x00d00000
[0000.337] RamDump Carveout Base=0x00000000ff280000 Size=0x00080000
[0000.343] Platform-DebugCarveout: 0
[0000.346] Nck Carveout Base=0x00000000ff080000 Size=0x00200000
[0000.352] Non secure mode, and RB not enabled.
[0000.369] Csd NumOfBlocks=0
[0004.312] *** Booting BFS0.
[0004.319] Using BFS PT to query partitions
[0009.329] *** Booting KFS0.
[0009.334] Using GPT Primary to query partitions
[0009.338] Error in NvTbootLoadBinary: 0x1 !
[0009.342] failed to load NvTbootTbootCpu from (0:3)
[0009.347] re-load NvTbootTbootCpu from (4:0)
[0009.352] Using GPT Primary to query partitions
[0009.361] Using BFS PT to query partitions
[0009.365] Error in NvTbootLoadBinary: 0x1 !
[0009.369] Error in NvTbootLoadBinary: 0x1 !
[0009.373] Error is 1
UART output during flash:
[0686.573] Enabled early print
[0686.575] [TegraBoot] (version 00.00.2018.01-l4t-175e178b)
[0686.581] Processing in recovery mode
[0686.584] A02 Bootrom Patch rev = 1023
[0686.588] Power-up reason: pmc por
[0686.591] NvTbootClockInit()
[0686.593] Established communication link with host
[0687.845] Module[6] Instance[0]Updating CLK_RST_CTRL Register [0x360] with 0x80400808
[0687.854] Odmdata from BCT: 0x00094000
[0687.858] DebugPort= 0x3
[0687.860] Reading board info Type: 1
[0687.863] Board Type: 1, Board Id: 3448
[0687.867] BoardId read from EEPROM/NCT: 3448
[0687.871] NvTbootInit_Porg: entry …
[0687.875] Board Info for Type: 1 already read
[0687.879] Board Type: 1, Board Id: 3448
[0687.882] BoardID = 3448, SKU = 0x0
[0687.886] NvTbootInit_Porg: calling Max77620Setup …
[0687.891] Module[1] Instance[4]Updating CLK_RST_CTRL Register [0x8] with 0x8000
[0687.898] Module[1] Instance[4]Updating CLK_RST_CTRL Register [0x128] with 0xc0000000
[0687.905] Module[1] Instance[4]Using Clock Divisor: 0x0[0687.910] Module[1] Instance[4]Updating CLK_RST_CTRL Register [0x128] with 0xc0000000
[0687.918] Module[1] Instance[4]Updating CLK_RST_CTRL Register [0x14] with 0x20080c1
[0687.926] Module[1] Instance[4]Updating CLK_RST_CTRL Register [0x8] with 0x0
[0687.934] Module[11] Instance[0]Updating CLK_RST_CTRL Register [0x35c] with 0x190037ff
[0687.942] Module[11] Instance[0]Updating CLK_RST_CTRL Register [0x364] with 0x482000fc
[0687.951] Module[11] Instance[0]Updating CLK_RST_CTRL Register [0x35c] with 0x110037ff
[0687.979] NvTbootInit_Porg: calling PorgRecovery …
[0687.984] NvTbootInit_Porg: calling Fastboot w/platformops …
[0687.990] NvTboot_Fastboot: PMC_SCRATCH0 Fastboot flag = 0
[0687.995] NvTbootInit_Porg: returning, code = 0 …
[0688.000] UART-A
[0688.001] No Battery Present
[0688.004] RamCode = 0
[0688.006] Board Info for Type: 1 already read
[0688.011] Board Type: 1, Board Id: 3448
[0688.014] Platform has DDR4 type RAM
[0688.018] max77620 disabling SD1 Remote Sense
[0688.022] Setting DDR voltage to 1125mv
[0688.026] Serial Number of Pmic Max77663: 0x634d9
[0688.030] Volt Vsel Val = 0x2a
[0688.033] NvTbootEnableMemClock()
[0688.037] NvTbootInitPllM()[0688.039] NvTbootClocksStartPll()
[0688.042] NvTbootClocksIsPllStable()
[0688.046] NvTbootAssertMemReset()[0688.051] Entering ramdump check
[0688.054] Get RamDumpCarveOut = 0x0
[0688.058] RamDumpCarveOut=0x0, RamDumperFlag=0xe59ff3f8
[0688.063] Last reboot was clean, booting normally!
[0688.067] Sdram initialization is successful
[0688.071] SecureOs Carveout Base=0x00000000ff800000 Size=0x00800000
[0688.078] Lp0 Carveout Base=0x00000000ff780000 Size=0x00001000
[0688.083] BpmpFw Carveout Base=0x00000000ff700000 Size=0x00080000
[0688.089] GSC1 Carveout Base=0x00000000ff600000 Size=0x00100000
[0688.095] GSC2 Carveout Base=0x00000000ff500000 Size=0x00100000
[0688.101] GSC4 Carveout Base=0x00000000ff400000 Size=0x00100000
[0688.107] GSC5 Carveout Base=0x00000000ff300000 Size=0x00100000
[0688.113] GSC3 Carveout Base=0x000000017f300000 Size=0x00d00000
[0688.129] RamDump Carveout Base=0x00000000ff280000 Size=0x00080000
[0688.135] Platform-DebugCarveout: 0
[0688.139] Downloaded BCT successfully
[0688.661] Downloaded Bootloader successfully
[0688.717] Downloaded rp1 successfully
[0689.022] Board Info for Type: 1 already read
[0689.026] Board Type: 1, Board Id: 3448
[0689.030] MAX77620_GPIO5 configured
[0689.033] CPU power rail is up
[0689.036] NvTbootEnableCpuClock()
[0689.039] CPU clock enabled
[0689.042] Module[10] Instance[0]Updating CLK_RST_CTRL Register [0x1d4] with 0x0
[0689.049] Module[10] Instance[0]Using Clock Divisor: 0x4[0689.054] Module[10] Instance[0]Updating CLK_RST_CTRL Register [0x1d4] with 0x4
[0689.061] Module[10] Instance[0]Updating CLK_RST_CTRL Register [0x18] with 0x1f00200
[0689.070] Performing RAM repair
[0689.073] Updating A64 Warmreset Address to 0x92c002e9
[0689.079] Enable APE clock/reset
[0689.082] Module[16] Instance[0]Updating CLK_RST_CTRL Register [0x6c0] with 0x80000000
[0689.090] Module[16] Instance[0]Using Clock Divisor: 0x2[0689.095] Module[16] Instance[0]Updating CLK_RST_CTRL Register [0x6c0] with 0x80000002
[0689.102] Module[16] Instance[0]Updating CLK_RST_CTRL Register [0x298] with 0x340
[0689.110] Module[16] Instance[0]Updating CLK_RST_CTRL Register [0x2a4] with 0xfe9f09d
[0689.117] Error in NvTbootGetTOSBinaryLength: 0x11 !
[0689.122] Loading Secure OS image failed.
[0689.126] Set NvDecSticky Bits
[0689.129] Module[13] Instance[0]Updating CLK_RST_CTRL Register [0x180] with 0x80000000
[0689.137] Module[13] Instance[0]Using Clock Divisor: 0x3[0689.142] Module[13] Instance[0]Updating CLK_RST_CTRL Register [0x180] with 0x80000003
[0689.149] Module[13] Instance[0]Updating CLK_RST_CTRL Register [0x10] with 0x90400171
[0689.157] Module[13] Instance[0]Updating CLK_RST_CTRL Register [0x4] with 0xc93d288
[0689.165] Module[14] Instance[0]Updating CLK_RST_CTRL Register [0x698] with 0x80000000
[0689.172] Module[14] Instance[0]Using Clock Divisor: 0x0[0689.177] Module[14] Instance[0]Updating CLK_RST_CTRL Register [0x698] with 0x80000000
[0689.185] Module[14] Instance[0]Updating CLK_RST_CTRL Register [0x298] with 0x344
[0689.192] Module[14] Instance[0]Updating CLK_RST_CTRL Register [0x2a4] with 0xfe9f099
[0689.200] Module[15] Instance[0]Updating CLK_RST_CTRL Register [0x69c] with 0x80000000
[0689.208] Module[15] Instance[0]Using Clock Divisor: 0x0[0689.213] Module[15] Instance[0]Updating CLK_RST_CTRL Register [0x69c] with 0x80000000
[0689.221] Module[15] Instance[0]Updating CLK_RST_CTRL Register [0x298] with 0x34c
[0689.228] Module[15] Instance[0]Updating CLK_RST_CTRL Register [0x2a4] with 0xfe9f091
[0689.236] Module[15] Instance[0]Updating CLK_RST_CTRL Register [0x2a4] with 0xfe9f099
[0689.243] Module[15] Instance[0]Updating CLK_RST_CTRL Register [0x298] with 0x344
[0689.250] Module[14] Instance[0]Updating CLK_RST_CTRL Register [0x2a4] with 0xfe9f09d
[0689.258] Module[14] Instance[0]Updating CLK_RST_CTRL Register [0x298] with 0x340
[0689.265] Module[13] Instance[0]Updating CLK_RST_CTRL Register [0x4] with 0x1c93d288
[0689.273] Module[13] Instance[0]Updating CLK_RST_CTRL Register [0x10] with 0x80400171
[0689.281] setting GSC1 MC params
[0689.285] setting GSC2 MC params
[0689.288] GSC2 address ff53fffc value c0edbbcc
[0689.293] setting GSC3 MC params
[0689.296] setting GSC4 MC params
[0689.300] setting GSC5 MC params
[0689.303] GSC MC Settings done
[0689.307] Next binary entry address: 0x92c00258
[0689.312] BoardId: 3448
[0689.314] Board Info for Type: 1 already read
[0689.318] Reading board info Type: 2
[0689.322] Board Info for Type: 1 already read
[0689.326] Board Type: 1, Board Id: 3448
[0689.330] Reading board info Type: 3
[0689.333] revision 1
[0689.335] crc 0xb4cdb5b2
[0689.338] early uart 0x70006000
[0689.341] dram bottom 0xfefff000
[0689.344] boot dev=0 instance=3
[0689.347] storage dev=0 instance=3
[0689.351] uid is 0x13fb8200 0xc000000 0x64461281 0x1
[0689.356] carveout[0] base:0x00000000 size: 0x00000000
[0689.361] carveout[1] base:0x80000000 size: 0x7efff000
[0689.366] carveout[2] base:0x80000000 size: 0x00000000
[0689.371] carveout[3] base:0x00000000 size: 0x00000000
[0689.376] carveout[4] base:0x00000000 size: 0x00000000
[0689.381] carveout[5] base:0xff800000 size: 0x00800000
[0689.386] carveout[6] base:0xff780000 size: 0x00001000
[0689.391] carveout[7] base:0x00000000 size: 0x00000000
[0689.396] carveout[8] base:0x00000000 size: 0x00000000
[0689.401] carveout[9] base:0xff700000 size: 0x00080000
[0689.406] carveout[10] base:0xff280000 size: 0x00080000
[0689.411] carveout[11] base:0xff600000 size: 0x00100000
[0689.416] carveout[12] base:0xff500000 size: 0x00100000
[0689.421] carveout[13] base:0x7f300000 size: 0x00d00000
[0689.427] carveout[14] base:0xff400000 size: 0x00100000
[0689.432] carveout[15] base:0xff300000 size: 0x00100000
[0689.437] carveout[16] base:0x00000000 size: 0x00000000
[0689.442] carveout[17] base:0x00000000 size: 0x00000000
[0689.447] carveout[18] base:0x00000000 size: 0x7f300000
[0689.452] bct size is 10240
[0689.455] tboot offset is 1048576
[0689.458] dram memory type is 3
[0689.461] block size 16384
[0689.464] page size 512
[0689.466] boot type 2
[0689.468] Opmode 3
[0689.470] powerkey long press 0
[0689.473] rollback version 2
[0689.476] rollback enable yes
[0689.479] rollback level-boot 0
[0689.482] rollback level-tos 0
[0689.485] rollback level-tsec 1
[0689.488] rollback level-nvdec 1
[0689.491] EKS valid state no
[0689.494] Printing reserved section
[0689.497] 0 [0689.499] 0 [0689.500] 0 [0689.501] 0 [0689.502] 0 [0689.503] 0 [0689.505] 0 [0689.506] 0 [0689.507] 0 [0689.508] 0 [0689.509] 0 [0689.510] 0 [0689.512] 0 [0689.513] 0 [0689.514] 0 [0689.515] 0 [0689.516] 0 [0689.518] 0 [0689.519] 0 [0689.520] 0 [0689.521] 0 [0689.522] 0 [0689.523] 0 [0689.525] 0 [0689.526] 0 [0689.527] 0 [0689.528] 0 [0689.529] 0 [0689.531] 0 [0689.532] 0 [0689.533] 0 [0689.534] 0 [0689.535] 0 [0689.536] 0 [0689.538] 0 [0689.539] 0 [0689.540] 0 [0689.541] 0 [0689.542] 0 [0689.543] 0 [0689.545] 0 [0689.546] 0 [0689.547] 0 [0689.548] 0 [0689.549] 0 [0689.551] 0 [0689.552] 0 [0689.553] 0 [0689.554] 0 [0689.555] 0 [0689.556] 0 [0689.558] 0 [0689.559] 0 [0689.560] 0 [0689.561] 0 [0689.562] 0 [0689.564] 0 [0689.565] 0 [0689.566] 0 [0689.567] 0 [0689.568] 0 [0689.569] 0 [0689.571] 0 [0689.572] 0 [0689.573] 0 [0689.574] 0 [0689.575] 0 [0689.577] 0 [0689.578] 0 [0689.579] 0 [0689.580] 0 [0689.581] 0 [0689.582] 0 [0689.584] 0 [0689.585] 0 [0689.586] 0 [0689.587] 0 [0689.588] 0 [0689.590] 0 [0689.591] 0 [0689.592] 0 [0689.593] 0 [0689.594] 0 [0689.595] 0 [0689.597] 0 [0689.598] 0 [0689.599] 0 [0689.600] 0 [0689.601] 0 [0689.603] 0 [0689.604] 0 [0689.605] 0 [0689.606] 0 [0689.607] 0 [0689.608] 0 [0689.610] 0 [0689.611] 0 [0689.612] 0 [0689.613] 0 [0689.614] 0 [0689.615] 0 [0689.617] 0 [0689.618] 0 [0689.619] 0 [0689.620] 0 [0689.621] 0 [0689.623] 0 [0689.624] 0 [0689.625] 0 [0689.626] 0 [0689.627] 0 [0689.628] 0 [0689.630] 0 [0689.631] 0 [0689.632] 0 [0689.633] 0 [0689.634] 0 [0689.636] 0 [0689.637] 0 [0689.638] 0 [0689.639] 0 [0689.640] 0 [0689.641] 0 [0689.643] 0 [0689.644] 0 [0689.645] 0 [0689.646] 0 [0689.647] 0 [0689.649] 0 [0689.650] 0 [0689.651] 0 [0689.652] 0 [0689.653] 0 [0689.654] 0 [0689.656] 0 [0689.657] 0 [0689.658] 0 [0689.659] 0 [0689.660] 0 [0689.662] 0 [0689.663] 0 [0689.664] 0 [0689.665] 0 [0689.666] 0 [0689.667] 0 [0689.669] 0 [0689.670] 0 [0689.671] 0 [0689.672] 0 [0689.673] 0 [0689.675] 0 [0689.676] 0 [0689.677] 0 [0689.678] 0 [0689.679] 0 [0689.680] 0 [0689.682] 0 [0689.683] 0 [0689.684] 0 [0689.685] 0 [0689.686] 0 [0689.688] 0 [0689.689] 0 [0689.690] 0 [0689.691] 0 [0689.692] 0 [0689.693] 0 [0689.695] 0 [0689.696] 0 [0689.697] 0 [0689.698] 0 [0689.699] 0 [0689.700] 0 [0689.702] 0 [0689.703] 0 [0689.704] 0 [0689.705] 0 [0689.706] 0 [0689.708] 0 [0689.709] 0 [0689.710] 0 [0689.711] 0 [0689.712] 0 [0689.713] 0 [0689.715] 0 [0689.716] 0 [0689.717] 0 [0689.718] 0 [0689.719] 0 [0689.721] 0 [0689.722] 0 [0689.723] 0 [0689.724] 0 [0689.725] 0 [0689.726] 0 [0689.728] 0 [0689.729] 0 [0689.730] 0 [0689.731] 0 [0689.732] 0 [0689.734] 0 [0689.735] 0 [0689.736] 0 [0689.737] 0 [0689.738] 0 [0689.739] 0 [0689.741] 0 [0689.742] 0 [0689.743] 0 [0689.744] 0 [0689.745] 0 [0689.747] 0 [0689.748] 0 [0689.749] 0 [0689.750] 0 [0689.751] 0 [0689.752] 0 [0689.754] 0 [0689.755] 0 [0689.756] 0 [0689.757] 0 [0689.758] 0 [0689.760] 0 [0689.761] 0 [0689.762] 0 [0689.763] 0 [0689.764] 0 [0689.765] 0 [0689.767] 0 [0689.768] 0 [0689.769] 0 [0689.770] 0 [0689.771] 0 [0689.773] Board Info for Type: 1 already read
[0689.777] Board Type: 1, Board Id: 3448
[0689.780] Starting CPU & Halting co-processor
[0689.785] NvTbootAssertCpuReset()
[0689.788] Halting AVP
[0706.350]
[0706.351] Debug Init done
[0706.354] Marked DTB cacheable
[0706.357] Bootloader DTB loaded at 0x83000400
[0706.361] DeviceTree Init done
[0706.374] Pinmux applied successfully
[0706.379] gicd_base: 0x50041000
[0706.382] gicc_base: 0x50042000
[0706.385] Interrupts Init done
[0706.389] Using base:0x60005090 & irq:208 for tick-timer
[0706.394] Using base:0x60005098 for delay-timer
[0706.399] platform_init_timer: DONE
[0706.402] Timer(tick) Init done
[0706.406] osc freq = 38400 khz
[0706.410]
[0706.411] Welcome to L4T Cboot
[0706.414]
[0706.415] Cboot Version: 00.00.2018.01-t210-40c3ff9c
[0706.420] calling constructors
[0706.423] initializing heap
[0706.426] initializing threads
[0706.429] initializing timers
[0706.432] creating bootstrap completion thread
[0706.436] top of bootstrap2()
[0706.439] CPU: ARM Cortex A57
[0706.442] CPU: MIDR: 0x411FD071, MPIDR: 0x80000000
[0706.447] initializing platform
[0706.549] Config for emmc ddr50 mode completed
[0706.553] sdmmc bdev is already initialized
[0706.557] of_register: registering tegra_udc to of_hal
[0706.562] of_register: registering inv20628-driver to of_hal
[0706.568] of_register: registering ads1015-driver to of_hal
[0706.573] of_register: registering lp8557-bl-driver to of_hal
[0706.579] of_register: registering bq2419x_charger to of_hal
[0706.585] of_register: registering bq27441_fuel_gauge to of_hal
[0706.596] gpio framework initialized
[0706.600] of_register: registering tca9539_gpio to of_hal
[0706.605] of_register: registering tca9539_gpio to of_hal
[0706.611] of_register: registering i2c_bus_driver to of_hal
[0706.616] of_register: registering i2c_bus_driver to of_hal
[0706.622] of_register: registering i2c_bus_driver to of_hal
[0706.627] pmic framework initialized
[0706.631] of_register: registering max77620_pmic to of_hal
[0706.636] regulator framework initialized
[0706.640] of_register: registering tps65132_bl_driver to of_hal
[0706.646] initializing target
[0706.652] gpio_driver_register: register ‘tegra_gpio_driver’ driver
[0706.660] board ID = D78, board SKU = 0
[0706.664] Skipping Z3!
[0706.668] fixed regulator driver initialized
[0706.686] initializing OF layer
[0706.690] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[0706.707] I2C Bus Init done
[0706.709] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[0706.720] I2C Bus Init done
[0706.722] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[0706.733] I2C Bus Init done
[0706.735] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[0706.746] I2C Bus Init done
[0706.748] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[0706.759] I2C Bus Init done
[0706.761] of_children_init: Ops found for compatible string maxim,max77620
[0706.772] max77620_init using irq 118
[0706.777] register ‘maxim,max77620’ pmic
[0706.781] gpio_driver_register: register ‘max77620-gpio’ driver
[0706.787] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[0706.798] I2C Bus Init done
[0706.801] Applying platform configs
[0706.808] platform-init is not present. Skipping
[0706.813] calling apps_init()
[0706.829] Found 17 GPT partitions in “sdmmc3_user”
[0706.834] Proceeding to flashing Server
[0706.838] usbdcd_reinit Initialize driver to use already enumerated device
[0706.845] nv3p_priv_usbf_open USB configuration success
[0707.195] Writing GPT partition
[0707.200] Erasing Boot device
[0707.203] device_write_gpt: Erasing boot device sdmmc3_boot
[0707.237] Erasing Storage Device
[0707.812] Sanitizing Storage Device
[0707.821] Writing protective mbr
[0707.830] Writing primary GPT
[0707.869] Writing secondary GPT
[0707.892] Found 17 GPT partitions in “sdmmc3_user”
[0707.899] Writing NVC partition
[0707.932] partition NVC write successful.
[0707.939] Writing PT partition
[0707.961] partition PT write successful.
[0707.968] Writing TBC partition
[0708.031] partition TBC write successful.
[0708.037] Writing RP1 partition
[0708.110] partition RP1 write successful.
[0708.116] Writing EBT partition
[0708.204] partition EBT write successful.
[0708.211] Writing WB0 partition
[0708.271] partition WB0 write successful.
[0708.277] Writing BPF partition
[0708.338] partition BPF write successful.
[0708.347] Writing NVC-1 partition
[0708.429] partition NVC-1 write successful.
[0708.435] Writing PT-1 partition
[0708.508] partition PT-1 write successful.
[0708.515] Writing TBC-1 partition
[0708.591] partition TBC-1 write successful.
[0708.601] Writing RP1-1 partition
[0708.687] partition RP1-1 write successful.
[0708.693] Writing EBT-1 partition
[0708.795] partition EBT-1 write successful.
[0708.803] Writing WB0-1 partition
[0708.877] partition WB0-1 write successful.
[0708.883] Writing BPF-1 partition
[0708.957] partition BPF-1 write successful.
[0708.963] Writing VER_b partition
[0709.028] partition VER_b write successful.
[0709.034] Writing VER partition
[0709.098] partition VER write successful.
[0709.104] Writing APP partition
[1008.883] partition APP write successful.
[1008.891] Writing DTB partition
[1008.946] partition DTB write successful.
[1008.952] Writing TOS partition
[1008.996] partition TOS write successful.
[1009.021] Writing EKS partition
[1009.064] partition EKS write successful.
[1009.070] Writing LNX partition
[1009.129] partition LNX write successful.
[1009.135] Writing DTB-1 partition
[1009.189] partition DTB-1 write successful.
[1009.196] Writing TOS-1 partition
[1009.242] partition TOS-1 write successful.
[1009.249] Writing EKS-1 partition
[1009.290] partition EKS-1 write successful.
[1009.297] Writing LNX-1 partition
[1009.359] partition LNX-1 write successful.
[1009.375] Writing BMP partition
[1009.436] partition BMP write successful.
[1009.442] Writing RP4 partition
[1009.504] partition RP4 write successful.
[1009.673] Writing BCT partition
[1010.080] partition BCT write successful.
[1010.245] Change state to cold boot mode
[1010.249] Flushing data to stroage
[0000.153] [TegraBoot] (version 00.00.2018.01-l4t-168a2aaa)
[0000.159] Processing in cold boot mode Bootloader 2
[0000.163] A02 Bootrom Patch rev = 1023
[0000.167] Power-up reason: software reset
[0000.171] No Battery Present
[0000.173] pmic max77620 reset reason
[0000.177] pmic max77620 NVERC : 0x0
[0000.180] RamCode = 0
[0000.182] Platform has DDR4 type RAM
[0000.185] max77620 disabling SD1 Remote Sense
[0000.190] Setting DDR voltage to 1125mv
[0000.194] Serial Number of Pmic Max77663: 0x634d9
[0000.201] Entering ramdump check
[0000.204] Get RamDumpCarveOut = 0x0
[0000.207] RamDumpCarveOut=0x0, RamDumperFlag=0xe59ff3f8
[0000.213] Last reboot was clean, booting normally!
[0000.217] Sdram initialization is successful
[0000.221] SecureOs Carveout Base=0x00000000ff800000 Size=0x00800000
[0000.227] Lp0 Carveout Base=0x00000000ff780000 Size=0x00001000
[0000.233] BpmpFw Carveout Base=0x00000000ff700000 Size=0x00080000
[0000.239] GSC1 Carveout Base=0x00000000ff600000 Size=0x00100000
[0000.245] GSC2 Carveout Base=0x00000000ff500000 Size=0x00100000
[0000.251] GSC4 Carveout Base=0x00000000ff400000 Size=0x00100000
[0000.257] GSC5 Carveout Base=0x00000000ff300000 Size=0x00100000
[0000.262] GSC3 Carveout Base=0x000000017f300000 Size=0x00d00000
[0000.279] RamDump Carveout Base=0x00000000ff280000 Size=0x00080000
[0000.285] Platform-DebugCarveout: 0
[0000.288] Nck Carveout Base=0x00000000ff080000 Size=0x00200000
[0000.294] Non secure mode, and RB not enabled.
[0000.310] Csd NumOfBlocks=0
[0004.176] *** Booting BFS0.
[0004.183] Using BFS PT to query partitions
[0010.611] *** Booting KFS0.
[0010.615] Using GPT Primary to query partitions
[0010.620] Error in NvTbootLoadBinary: 0x1 !
[0010.624] failed to load NvTbootTbootCpu from (0:3)
[0010.628] re-load NvTbootTbootCpu from (4:0)
[0010.633] Using GPT Primary to query partitions
[0010.642] Using BFS PT to query partitions
[0010.646] Error in NvTbootLoadBinary: 0x1 !
[0010.651] Error in NvTbootLoadBinary: 0x1 !
[0010.655] Error is 1