I2Cset, no boot

Autonomous Machines Jetson & Embedded Systems Jetson Nano
29

It doesn’t boot but it is now flashing.

I started fresh and followed every step mentioned in this thread: after i2cset test, nano can't boot - #70 by lonesomesnow i.e. Applied each of the binaries in sequence and modified the files as mentioned. The only difference being that I’ve only ever used the image created by SDK manager (Jetpack 4.3).

The changes boiled down to:

tail jetson-nano-emmc.conf 
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

[b]BOARDID="3448";
FAB="400";
BOARDSKU="0000" ;
BOARDREV="C.0";[/b]
EMMC_CFG=flash_l4t_t210_spi_sd_p3448.xml;
BLBlockSize=1048576;
source "${LDK_DIR}/p3448-0000.conf.common";
T21BINARGS="--bins \"EBT cboot.bin; "

Using the “nvtboot_20190711.tar.gz” binaries: https://forums.developer.nvidia.com/uploads/short-url/1q7xzrC3JqGGq3jHiFJL9stuLtq.gz

DFLT_KERNEL_IMAGE="bootloader/${target_board}/p3450-porg/u-boot.bin";
fi;
BOOTLOADER="bootloader/${target_board}/cboot.bin";
TBCFILE="bootloader/nvtboot_cpu.bin";
BPFFILE="bootloader/t210ref/sc7entry-firmware.bin";
TOSFILE="bootloader/tos.img";
EKSFILE="bootloader/eks.img";
BCT="--bct ";
VERFILENAME="qspi_bootblob_ver.txt";
+ BCFFILE="bootloader/${target_board}/cfg/board_config_p3448.xml";

Let me know if you have anything for me to try to make it boot.

Thanks for your help

30

Will it be able to flash if you don’t apply nvtboot_20190711.tar.gz but only the rest of patch?

31

I just want to check that because the nvtboot binary was shared for earlier release like rel-32.1 but not rel-32.3. So it is possible to have compatibility issue.

32

And more precisely, I think the only solution that resolved the issue on rel-32.1 is below patch.

This one should be compatible to rel-32.3.1 so please try this and this one only.

33

Hi,

We just had a conclusion with another forum user with below post.

Please try this method and see if it can work with you. Actually, we are just doing the same thing. The only difference is not using rel-32.1 nvtboot on rel-32.3.1.

34

Yeah correct, I was able to flash without applying 20190711.

I will try the other fixes you’ve listed shortly. Thanks a lot

35

Hi,

I guess no other fixes would actually work. Only this method would work.
Is everything fine now?

36

Hi Wayne,

That fix didn’t work either. The device flashes fine but then won’t boot, same output as before. Am I able to RMA this unit?

Thanks so much for your efforts.

James

37

Hi,

Which is “same output as before”? Since this thread is very long, I would suggest you to share the exact log again.

38

Please also tell what you’ve done to make your board able to flash. Since another forum user already successfully flashed and booting up his device, I think it should be applicable to your case too.

39

I just followed the instructions in post #33 exactly.

UART output during flash is:

[1854.383] Enabled early print
[1854.386] [L4T TegraBoot] (version 00.00.2018.01-l4t-1463e5a5)
[1854.392] Processing in recovery mode
[1854.395] A02 Bootrom Patch rev = 1023
[1854.399] Power-up reason: pmc por
[1854.402] Established communication link with host
[1855.645] Odmdata from BCT: 0x00094000
[1855.649] DebugPort= 0x3
[1855.700] EEPROM CRC failed. Calculated crc=0xc3 CRC stored = 0x67
[1855.706] Reading Board-Type unsuccessful
[1855.710] BoardId read from EEPROM/NCT: 0
[1855.714] Unsupported Platform 0
[1855.717] Downloaded BCT successfully

UART output from boot:

[0000.181] [L4T TegraBoot] (version 00.00.2018.01-l4t-39a9dc3d)
[0000.186] Processing in cold boot mode Bootloader 2
[0000.191] A02 Bootrom Patch rev = 1023
[0000.194] Power-up reason: pmc por
[0000.198] No Battery Present
[0000.200] pmic max77620 reset reason
[0000.204] pmic max77620 NVERC : 0x40
[0000.207] RamCode = 0
[0000.209] Platform has DDR4 type RAM
[0000.213] max77620 disabling SD1 Remote Sense
[0000.217] Setting DDR voltage to 1125mv
[0000.221] Serial Number of Pmic Max77663: 0x634d9
[0000.228] Entering ramdump check
[0000.231] Get RamDumpCarveOut = 0x0
[0000.235] RamDumpCarveOut=0x0, RamDumperFlag=0xe59ff3f8
[0000.240] Last reboot was clean, booting normally!
[0000.244] Sdram initialization is successful
[0000.248] SecureOs Carveout Base=0x00000000ff800000 Size=0x00800000
[0000.255] Lp0 Carveout Base=0x00000000ff780000 Size=0x00001000
[0000.260] BpmpFw Carveout Base=0x00000000ff700000 Size=0x00080000
[0000.266] GSC1 Carveout Base=0x00000000ff600000 Size=0x00100000
[0000.272] GSC2 Carveout Base=0x00000000ff500000 Size=0x00100000
[0000.278] GSC4 Carveout Base=0x00000000ff400000 Size=0x00100000
[0000.284] GSC5 Carveout Base=0x00000000ff300000 Size=0x00100000
[0000.290] GSC3 Carveout Base=0x000000017f300000 Size=0x00d00000
[0000.306] RamDump Carveout Base=0x00000000ff280000 Size=0x00080000
[0000.312] Platform-DebugCarveout: 0
[0000.315] Nck Carveout Base=0x00000000ff080000 Size=0x00200000
[0000.321] Non secure mode, and RB not enabled.
[0000.337] Csd NumOfBlocks=0
[0000.530] *** Booting BFS0.
[0000.536] Using BFS PT to query partitions
[0001.119] *** Booting KFS0.
[0001.123] Using GPT Primary to query partitions
[0001.128] Loading Tboot-CPU binary
[0001.135] Verifying TBC in OdmNonSecureSBK mode
[0001.145] Bootloader load address is 0xa0000000, entry address is 0xa0000258
[0001.152] Bootloader downloaded successfully.
[0001.156] Downloaded Tboot-CPU binary to 0xa0000258
[0001.161] MAX77620_GPIO5 configured
[0001.164] CPU power rail is up
[0001.167] CPU clock enabled
[0001.171] Performing RAM repair
[0001.174] Updating A64 Warmreset Address to 0xa00002e9
[0001.179] Loading NvTbootBootloaderDTB
[0001.196] Verifying NvTbootBootloaderDTB in OdmNonSecureSBK mode
[0001.261] Bootloader DTB Load Address: 0x83000000
[0001.266] Loading NvTbootKernelDTB
[0001.283] Verifying NvTbootKernelDTB in OdmNonSecureSBK mode
[0001.348] Kernel DTB Load Address: 0x83100000
[0001.353] Loading cboot binary
[0001.364] Verifying EBT in OdmNonSecureSBK mode
[0001.406] Bootloader load address is 0x92c00000, entry address is 0x92c00258
[0001.413] Bootloader downloaded successfully.
[0001.417] Next binary entry address: 0x92c00258
[0001.422] BoardId: 3448
[0001.434] Verifying SC7EntryFw in OdmNonSecureSBK mode
[0001.486] /bpmp deleted
[0001.488] SC7EntryFw header found loaded at 0xff700000
[0001.677] OVR2 PMIC
[0001.679] Bpmp FW successfully loaded
[0001.684] WB0 init successfully at 0xff780000
[0001.688] Set NvDecSticky Bits
[0001.691] GSC2 address ff53fffc value c0edbbcc
[0001.698] GSC MC Settings done
[0001.701] TOS Image length 53680
[0001.704] Monitor size 53680
[0001.707] OS size 0
[0001.712] Secure Os AES-CMAC Verification Success!
[0001.717] TOS image cipher info: plaintext
[0001.721] Loading and Validation of Secure OS Successful
[0001.737] SC7 Entry Firmware - 0xff700000, 0x4000
[0001.741] NvTbootPackSdramParams: start.
[0001.746] NvTbootPackSdramParams: done.
[0001.750] Tegraboot started after 160262 us
[0001.754] Basic modules init took 1301226 us
[0001.758] Sec Bootdevice Read Time = 542 ms, Read Size = 14457 KB
[0001.764] Sec Bootdevice Write Time = 0 ms, Write Size = 0 KB
[0001.770] Next stage binary read took 7376 us
[0001.774] Carveout took -10229 us
[0001.777] CPU initialization took 333933 us
[0001.781] Total time taken by TegraBoot 1632306 us

[0001.786] Starting CPU & Halting co-processor

64NOTICE: BL31: v1.3(release):23b153a63
NOTICE: BL31: Built : 22:39:57, Dec 9 2019
ERROR: Error initializing runtime service trusty_fast
[0001.908] RamCode = 0
[0001.913] LPDDR4 Training: Read DT: Number of tables = 2
[0001.918] EMC Training (SRC-freq: 204000; DST-freq: 1600000)
[0001.930] EMC Training Successful
[0001.933] 408000 not found in DVFS table
[0001.940] RamCode = 0
[0001.943] DT Write: emc-table@204000 succeeded
[0001.949] DT Write: emc-table@1600000 succeeded
[0001.953] LPDDR4 Training: Write DT: Number of tables = 2
[0002.009]
[0002.010] Debug Init done
[0002.013] Marked DTB cacheable
[0002.016] Bootloader DTB loaded at 0x83000000
[0002.021] Marked DTB cacheable
[0002.023] Kernel DTB loaded at 0x83100000
[0002.027] DeviceTree Init done
[0002.043] Pinmux applied successfully
[0002.047] gicd_base: 0x50041000
[0002.051] gicc_base: 0x50042000
[0002.054] Interrupts Init done
[0002.058] Using base:0x60005090 & irq:208 for tick-timer
[0002.063] Using base:0x60005098 for delay-timer
[0002.068] platform_init_timer: DONE
[0002.071] Timer(tick) Init done
[0002.075] osc freq = 38400 khz
[0002.079]
[0002.080] Welcome to L4T Cboot
[0002.083]
[0002.084] Cboot Version: 00.00.2018.01-t210-40c3ff9c
[0002.089] calling constructors
[0002.092] initializing heap
[0002.095] initializing threads
[0002.098] initializing timers
[0002.101] creating bootstrap completion thread
[0002.105] top of bootstrap2()
[0002.108] CPU: ARM Cortex A57
[0002.111] CPU: MIDR: 0x411FD071, MPIDR: 0x80000000
[0002.115] initializing platform
[0002.169] Config for emmc ddr50 mode completed
[0002.174] sdmmc bdev is already initialized
[0002.178] Enable APE clock
[0002.180] Un-powergate APE partition
[0002.184] of_register: registering tegra_udc to of_hal
[0002.189] of_register: registering inv20628-driver to of_hal
[0002.195] of_register: registering ads1015-driver to of_hal
[0002.200] of_register: registering lp8557-bl-driver to of_hal
[0002.206] of_register: registering bq2419x_charger to of_hal
[0002.212] of_register: registering bq27441_fuel_gauge to of_hal
[0002.223] gpio framework initialized
[0002.227] of_register: registering tca9539_gpio to of_hal
[0002.232] of_register: registering tca9539_gpio to of_hal
[0002.237] of_register: registering i2c_bus_driver to of_hal
[0002.243] of_register: registering i2c_bus_driver to of_hal
[0002.248] of_register: registering i2c_bus_driver to of_hal
[0002.254] pmic framework initialized
[0002.257] of_register: registering max77620_pmic to of_hal
[0002.263] regulator framework initialized
[0002.267] of_register: registering tps65132_bl_driver to of_hal
[0002.273] initializing target
[0002.279] gpio_driver_register: register ‘tegra_gpio_driver’ driver
[0002.289] fixed regulator driver initialized
[0002.307] initializing OF layer
[0002.310] NCK carveout not present
[0002.313] Skipping dts_overrides
[0002.317] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[0002.334] I2C Bus Init done
[0002.337] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[0002.347] I2C Bus Init done
[0002.350] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[0002.360] I2C Bus Init done
[0002.363] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[0002.373] I2C Bus Init done
[0002.376] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[0002.386] I2C Bus Init done
[0002.389] of_children_init: Ops found for compatible string maxim,max77620
[0002.399] max77620_init using irq 118
[0002.404] register ‘maxim,max77620’ pmic
[0002.408] gpio_driver_register: register ‘max77620-gpio’ driver
[0002.414] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[0002.425] I2C Bus Init done
[0002.428] NCK carveout not present
[0002.438] Find /i2c@7000c000’s alias i2c0
[0002.442] get eeprom at 1-a0, size 256, type 0
[0002.451] Find /i2c@7000c500’s alias i2c2
[0002.455] get eeprom at 3-a0, size 256, type 0
[0002.459] get eeprom at 3-ae, size 256, type 0
[0002.464] pm_ids_update: Updating 1,a0, size 256, type 0
[0002.469] I2C slave not started
[0002.472] I2C write failed
[0002.475] Writing offset failed
[0002.478] eeprom_init: EEPROM read failed
[0002.482] pm_ids_update: eeprom init failed
[0002.486] pm_ids_update: Updating 3,a0, size 256, type 0
[0002.516] eeprom_init: EEPROM incompatible version found
[0002.521] pm_ids_update: eeprom init failed
[0002.525] pm_ids_update: Updating 3,ae, size 256, type 0
[0002.555] pm_ids_update: The pm board id is 3449-0000-400
[0002.562] Adding plugin-manager/ids/3449-0000-400=/i2c@7000c500:module@0x57
[0002.570] pm_ids_update: pm id update successful
[0002.599] eeprom_init: EEPROM incompatible version found
[0002.604] Plugin Manager: Parse ODM data 0x00094000
[0002.614] shim_cmdline_install: /chosen/bootargs: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1
[0002.639] Find /i2c@7000c000’s alias i2c0
[0002.643] get eeprom at 1-a0, size 256, type 0
[0002.651] Find /i2c@7000c500’s alias i2c2
[0002.655] get eeprom at 3-a0, size 256, type 0
[0002.660] get eeprom at 3-ae, size 256, type 0
[0002.664] pm_ids_update: Updating 1,a0, size 256, type 0
[0002.669] I2C slave not started
[0002.672] I2C write failed
[0002.675] Writing offset failed
[0002.678] eeprom_init: EEPROM read failed
[0002.682] pm_ids_update: eeprom init failed
[0002.686] pm_ids_update: Updating 3,a0, size 256, type 0
[0002.716] eeprom_init: EEPROM incompatible version found
[0002.721] pm_ids_update: eeprom init failed
[0002.725] pm_ids_update: Updating 3,ae, size 256, type 0
[0002.756] pm_ids_update: The pm board id is 3449-0000-400
[0002.762] Adding plugin-manager/ids/3449-0000-400=/i2c@7000c500:module@0x57
[0002.769] pm_ids_update: pm id update successful
[0002.798] eeprom_init: EEPROM incompatible version found
[0002.804] shim_get_serial_num:EEPROM read failed
[0002.808] Reading Serial number from with NCT/FCT
[0002.813] No serial number in NCT/EEPROM. Using fused IDs
[0002.818] Chip UID is 00000001644612810c00000013fb8200
[0002.823] Add serial number:0082fb130000000c8112 as DT property
[0002.832] Applying platform configs
[0002.838] platform-init is not present. Skipping
[0002.843] calling apps_init()
[0002.859] Found 17 GPT partitions in “sdmmc3_user”
[0002.864] Proceeding to Cold Boot
[0002.867] starting app android_boot_app
[0002.871] Device state: unlocked
[0002.874] display console init
[0002.882] could not find regulator
[0002.906] hdmi cable not connected
[0002.909] is_hdmi_nDT entry for leds-pwm not found
e[0002.917] eded: HDMI not connected, returning false
[0002.922] hdmi is not connected
[0002.925] sor0 is not supported
[0002.928] display_console_init: no valid display out_type
[0002.936] subnode volume_up is not found !
[0002.940] subnode back is not found !
[0002.943] subnode volume_down is not found !
[0002.948] subnode menu is not found !
[0002.951] Gpio keyboard init success
[0002.998] found decompressor handler: lz4-legacy
[0003.013] decompressing blob (type 1)…
[0003.046] display_resolution: No display init
[0003.050] Failed to retrieve display resolution
[0003.055] Could not load/initialize BMP blob…ignoring
[0003.105] decompressor handler not found
[0003.109] load_firmware_blob: Firmware blob loaded, entries=2
[0003.114] -------> se_aes_verify_sbk_clear: 747
[0003.119] se_aes_verify_sbk_clear: Error
[0003.123] bl_battery_charging: connected to external power supply
[0003.130] xusb is supported
[0003.136] error while finding nvidia,portmap
[0003.640] xusb blob version 0 size 124416
[0003.644] firmware size 124416
[0003.649] Firmware timestamp: 0x5da88fc3, Version: 50.25 release
[0003.661] xhci0: 64 bytes context size, 32-bit DMA
[0003.701] usbus0: 5.0Gbps Super Speed USB v3.0
[0003.721] uhub0: <Nvidia XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[0004.371] uhub0: 9 ports with 9 removable, self powered
[0005.371] failed to get HID devices
[0005.374] failed to init xhci or no usb device attached
[0005.382] display_console_ioctl: No display init
[0005.386] switch_backlight failed
[0005.396] device_query_partition_size: failed to open partition sdmmc3_user:MSC !
[0005.403] MSC Partition not found
[0005.413] device_query_partition_size: failed to open partition sdmmc3_user:USP !
[0005.420] USP partition read failed!
[0005.423] blob_init: blob-partition USP header read failed
[0005.429] android_boot Unable to update recovery partition
[0005.434] kfs_getpartname: name = LNX
[0005.438] Loading kernel from LNX
[0005.502] load kernel from storage
[0005.511] decompressor handler not found
[0005.531] Successfully loaded kernel and ramdisk images
[0005.537] display_resolution: No display init
[0005.541] Failed to retrieve display resolution
[0005.546] bmp blob is not loaded and initialized
[0005.550] Failed to display boot-logo
[0005.554] NCK carveout not present
[0005.557] Skipping dts_overrides
[0005.560] NCK carveout not present
[0005.570] Find /i2c@7000c000’s alias i2c0
[0005.574] get eeprom at 1-a0, size 256, type 0
[0005.583] Find /i2c@7000c500’s alias i2c2
[0005.587] get eeprom at 3-a0, size 256, type 0
[0005.591] get eeprom at 3-ae, size 256, type 0
[0005.596] pm_ids_update: Updating 1,a0, size 256, type 0
[0005.601] I2C slave not started
[0005.604] I2C write failed
[0005.607] Writing offset failed
[0005.610] eeprom_init: EEPROM read failed
[0005.614] pm_ids_update: eeprom init failed
[0005.618] pm_ids_update: Updating 3,a0, size 256, type 0
[0005.648] eeprom_init: EEPROM incompatible version found
[0005.653] pm_ids_update: eeprom init failed
[0005.657] pm_ids_update: Updating 3,ae, size 256, type 0
[0005.687] pm_ids_update: The pm board id is 3449-0000-400
[0005.694] Adding plugin-manager/ids/3449-0000-400=/i2c@7000c500:module@0x57
[0005.702] pm_ids_update: pm id update successful
[0005.731] eeprom_init: EEPROM incompatible version found
[0005.736] Plugin Manager: Parse ODM data 0x00094000
[0005.746] shim_cmdline_install: /chosen/bootargs: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1
[0005.764] Add serial number:0082fb130000000c8112 as DT property
[0005.774] “bpmp” doesn’t exist, creating
[0005.779] Updated bpmp info to DTB
[0005.784] Updated initrd info to DTB
[0005.788] “proc-board” doesn’t exist, creating
[0005.793] Updated board info to DTB
[0005.797] “pmu-board” doesn’t exist, creating
[0005.802] Updated board info to DTB
[0005.806] “display-board” doesn’t exist, creating
[0005.811] Updated board info to DTB
[0005.815] “reset” doesn’t exist, creating
[0005.819] Updated reset info to DTB
[0005.822] display_console_ioctl: No display init
[0005.827] display_console_ioctl: No display init
[0005.832] display_console_ioctl: No display init
[0005.836] Cmdline: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000
[0005.870] DTB cmdline: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1
[0005.886] boot image cmdline: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1
[0005.902] Updated bootarg info to DTB
[0005.905] Adding uuid 00000001644612810c00000013fb8200 to DT
[0005.911] Adding eks info 0 to DT
[0005.917] WARNING: Failed to pass NS DRAM ranges to TOS, err: -7
[0005.923] Updated memory info to DTB
[0005.931] set vdd_core voltage to 1125 mv
[0005.935] setting ‘vdd-core’ regulator to 1125000 micro volts
[0005.961] Found secure-pmc; disable BPMP

U-Boot 2016.07-g0536cf2a27 (Dec 09 2019 - 22:40:32 -0800)

TEGRA210
Model: NVIDIA P3450-Porg
Board: NVIDIA P3450-PORG
DRAM: 4 GiB
MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1
SF: Failed to get idcodes
*** Warning - spi_flash_probe() failed, using default environment

In: serial
Out: serial
Err: serial
Can’t find nvidia,ethernet-mac property in CBoot DTB
Net: No ethernet found.
Card did not respond to voltage select!
** Bad device mmc 1 **
Hit any key to stop autoboot: 1 0
Card did not respond to voltage select!
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1…
Found /boot/extlinux/extlinux.conf
Retrieving file: /boot/extlinux/extlinux.conf
733 bytes read in 82 ms (7.8 KiB/s)
1: primary kernel
Retrieving file: /boot/initrd
5487751 bytes read in 249 ms (21 MiB/s)
Retrieving file: /boot/Image
34191368 bytes read in 807 ms (40.4 MiB/s)
append: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 quiet

Flattened Device Tree blob at 83100000

Booting using the fdt blob at 0x83100000
reserving fdt memory region: addr=80000000 size=20000
Using Device Tree in place at 0000000083100000, end 00000000831776fe

Starting kernel …

[ 1.017540] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.523727] Host read timeout at address 545c00c4 [ 1.884621] Unable to handle kernel read from unreadable memory at virtual address 000001d8 [ 1.893075] Mem abort info: [ 1.895873] ESR = 0x96000005 [ 1.898929] Exception class = DABT (current EL), IL = 32 bits [ 1.904844] SET = 0, FnV = 0 [ 1.907900] EA = 0, S1PTW = 0 [ 1.911043] Data abort info: [ 1.913917] ISV = 0, ISS = 0x00000005 [ 1.917753] CM = 0, WnR = 0 [ 1.920721] [00000000000001d8] user address but active_mm is swapper [ 1.927076] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 1.928196] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.938107] Modules linked in: [ 1.941166] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.9.140-tegra #1 [ 1.947680] Hardware name: NVIDIA Jetson Nano Developer Kit (DT) [ 1.953676] task: ffffffc0fa6f0000 task.stack: ffffffc0fa66c000 [ 1.955288] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 1.955292] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.955295] usb 1-2: Product: 4-Port USB 2.1 Hub [ 1.955297] usb 1-2: Manufacturer: Generic [ 1.956166] hub 1-2:1.0: USB hub found [ 1.956785] hub 1-2:1.0: 4 ports detected [ 1.989817] PC is at tegra_channel_populate_dev_info+0xac/0x190 [ 1.995727] LR is at tegra_channel_populate_dev_info+0x9c/0x190 [ 2.001634] pc : [] lr : [] pstate: 40400045 [ 2.006028] tegra_cec 70015000.tegra_cec: Can't find physical addresse. [ 2.006031] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 2.021432] sp : ffffffc0fa66f850 [ 2.024739] x29: ffffffc0fa66f850 x28: ffffff80098045e8 [ 2.030056] x27: ffffff8009648d18 x26: 0000000000000001 [ 2.035373] x25: 00000000009a2065 x24: ffffffc0f74ce038 [ 2.040691] x23: 000000000000000a x22: ffffffc0f798b1e8 [ 2.046008] x21: ffffffc0f798b018 x20: ffffffc0fa66f8f8 [ 2.051326] x19: ffffffc0f94f4810 x18: 0000000000000001 [ 2.056642] x17: 0000000000000005 x16: 0000000000000000 [ 2.061958] x15: ffffffffffffffff x14: ffffffc0fa66f850 [ 2.067273] x13: ffffffc0fa66f755 x12: ffffffffffffffff [ 2.072587] x11: ffffffc0fa66f710 x10: ffffffc0fa66f710 [ 2.077904] x9 : 0000000000000002 x8 : 0000000000000002 [ 2.083219] x7 : ffffff8008fb6e08 [ 2.085972] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 1 [ 2.093209] x6 : 0000000000000090 x5 : 000000000000008d x4 : 0000000000000001 [ 2.100446] x3 : 0000000000000000 x2 : 0000000000000000 [ 2.105762] x1 : 0000000000000000 x0 : 0000000000000000 [ 2.110030] usb 1-2: usb_suspend_both: status 0 [ 2.110082] usb usb1: usb_suspend_both: status 0 [ 2.120022] [ 2.121509] Process swapper/0 (pid: 1, stack limit = 0xffffffc0fa66c000) [ 2.128196] Call trace: [ 2.130637] [] tegra_channel_populate_dev_info+0xac/0x190 [ 2.137587] [] tegra_channel_init_subdevices+0x2e8/0x790 [ 2.144451] [] tegra_vi_graph_notify_complete+0x2e8/0x6e0 [ 2.151402] [] v4l2_async_test_notify+0x104/0x120 [ 2.157656] [] v4l2_async_notifier_register+0x128/0x198 [ 2.164432] [] tegra_vi_graph_init+0x234/0x288 [ 2.170429] [] tegra_vi_media_controller_init+0x1d0/0x208 [ 2.177379] [] vi_probe+0x378/0x520 [ 2.182423] [] platform_drv_probe+0x60/0xc0 [ 2.188159] [] driver_probe_device+0xd8/0x408 [ 2.194068] [] __driver_attach+0xdc/0x128 [ 2.199632] [] bus_for_each_dev+0x5c/0xa8 [ 2.205193] [] driver_attach+0x30/0x40 [ 2.210494] [] bus_add_driver+0x20c/0x2a8 [ 2.216056] [] driver_register+0x6c/0x110 [ 2.221619] [] __platform_driver_register+0x5c/0x68 [ 2.228050] [] vi_init+0x2c/0x38 [ 2.232832] [] do_one_initcall+0x44/0x130 [ 2.238396] [] kernel_init_freeable+0x1a0/0x244 [ 2.244479] [] kernel_init+0x18/0x108 [ 2.249693] [] ret_from_fork+0x10/0x40 [ 2.254998] ---[ end trace bec756dc814728cd ]--- [ 2.264845] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.264845] [ 2.273972] SMP: stopping secondary CPUs [ 2.277936] Kernel Offset: disabled [ 2.281419] Memory Limit: none [ 2.289571] Rebooting in 5 seconds..

Output from host:
sudo ./flash.sh jetson-nano-emmc mmcblk0p1
###############################################################################

L4T BSP Information:

R32 , REVISION: 3.1

###############################################################################

Target Board Information:

Name: jetson-nano-emmc, Board Family: t210ref, SoC: Tegra 210,

OpMode: production, Boot Authentication: ,

###############################################################################
Board ID(3448) version(400)
creating dummy /home/james/nvidia/Linux_for_Tegra/bootloader/badpage.bin
1+0 records in
1+0 records out
4096 bytes (4.1 kB, 4.0 KiB) copied, 0.0822772 s, 49.8 kB/s
copying bctfile(/home/james/nvidia/Linux_for_Tegra/bootloader/t210ref/BCT/P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.cfg)… done.
copying bootloader(/home/james/nvidia/Linux_for_Tegra/bootloader/t210ref/cboot.bin)… done.
copying initrd(/home/james/nvidia/Linux_for_Tegra/bootloader/l4t_initrd.img)… done.
populating kernel to rootfs… done.
populating initrd to rootfs… done.
populating /home/james/nvidia/Linux_for_Tegra/kernel/dtb/tegra210-p3448-0002-p3449-0000-b00.dtb to rootfs… done.
Making Boot image… done.
Existing sosfile(/home/james/nvidia/Linux_for_Tegra/bootloader/nvtboot_recovery.bin) reused.
copying tegraboot(/home/james/nvidia/Linux_for_Tegra/bootloader/t210ref/nvtboot.bin)… done.
copying cpu_bootloader(/home/james/nvidia/Linux_for_Tegra/bootloader/t210ref/cboot.bin)… done.
copying bpffile(/home/james/nvidia/Linux_for_Tegra/bootloader/t210ref/sc7entry-firmware.bin)… done.
Existing badpagefile(/home/james/nvidia/Linux_for_Tegra/bootloader/badpage.bin) reused.
copying wb0boot(/home/james/nvidia/Linux_for_Tegra/bootloader/t210ref/warmboot.bin)… done.
Existing tosfile(/home/james/nvidia/Linux_for_Tegra/bootloader/tos-mon-only.img) reused.
Existing eksfile(/home/james/nvidia/Linux_for_Tegra/bootloader/eks.img) reused.
copying dtbfile(/home/james/nvidia/Linux_for_Tegra/kernel/dtb/tegra210-p3448-0002-p3449-0000-b00.dtb)… done.
Copying nv_boot_control.conf to rootfs
Making system.img…
populating rootfs from /home/james/nvidia/Linux_for_Tegra/rootfs … done.
Sync’ing system.img … done.
Converting RAW image to Sparse image…

---- Raw to Sparse Image Converter v1.0 ----------------------------
0: RAW: 6291456( 6 blks) ==> 28:6291468
1: SKP: 31457280( 30 blks) ==> 6291496:12
2: RAW: 6291456( 6 blks) ==> 6291508:6291468
3: SKP: 90177536( 86 blks) ==> 12582976:12
4: RAW: 1048576( 1 blks) ==> 12582988:1048588
5: SKP: 3145728( 3 blks) ==> 13631576:12
6: RAW: 27262976( 26 blks) ==> 13631588:27262988
7: SKP: 1048576( 1 blks) ==> 40894576:12
8: RAW: 161480704( 154 blks) ==> 40894588:161480716
9: SKP: 15728640( 15 blks) ==> 202375304:12
10: RAW: 59768832( 57 blks) ==> 202375316:59768844
11: SKP: 3145728( 3 blks) ==> 262144160:12
12: RAW: 98566144( 94 blks) ==> 262144172:98566156
13: SKP: 6291456( 6 blks) ==> 360710328:12
14: RAW: 137363456( 131 blks) ==> 360710340:137363468
15: SKP: 5242880( 5 blks) ==> 498073808:12
16: RAW: 17825792( 17 blks) ==> 498073820:17825804
17: SKP: 3145728( 3 blks) ==> 515899624:12
18: RAW: 124780544( 119 blks) ==> 515899636:124780556
19: SKP: 5242880( 5 blks) ==> 640680192:12
20: RAW: 4194304( 4 blks) ==> 640680204:4194316
21: SKP: 1048576( 1 blks) ==> 644874520:12
22: RAW: 50331648( 48 blks) ==> 644874532:50331660
23: SKP: 3145728( 3 blks) ==> 695206192:12
24: RAW: 22020096( 21 blks) ==> 695206204:22020108
25: SKP: 3145728( 3 blks) ==> 717226312:12
26: RAW: 22020096( 21 blks) ==> 717226324:22020108
27: SKP: 3145728( 3 blks) ==> 739246432:12
28: RAW: 26214400( 25 blks) ==> 739246444:26214412
29: SKP: 3145728( 3 blks) ==> 765460856:12
30: RAW: 28311552( 27 blks) ==> 765460868:28311564
31: SKP: 1048576( 1 blks) ==> 793772432:12
32: RAW: 37748736( 36 blks) ==> 793772444:37748748
33: SKP: 4194304( 4 blks) ==> 831521192:12
34: RAW: 38797312( 37 blks) ==> 831521204:38797324
35: SKP: 3145728( 3 blks) ==> 870318528:12
36: RAW: 38797312( 37 blks) ==> 870318540:38797324
37: SKP: 3145728( 3 blks) ==> 909115864:12
38: RAW: 110100480( 105 blks) ==> 909115876:110100492
39: SKP: 3145728( 3 blks) ==> 1019216368:12
40: RAW: 1048576( 1 blks) ==> 1019216380:1048588
41: SKP: 3145728( 3 blks) ==> 1020264968:12
42: RAW: 66060288( 63 blks) ==> 1020264980:66060300
43: SKP: 1048576( 1 blks) ==> 1086325280:12
44: RAW: 14680064( 14 blks) ==> 1086325292:14680076
45: SKP: 2097152( 2 blks) ==> 1101005368:12
46: RAW: 123731968( 118 blks) ==> 1101005380:123731980
47: SKP: 2097152( 2 blks) ==> 1224737360:12
48: RAW: 12582912( 12 blks) ==> 1224737372:12582924
49: SKP: 4194304( 4 blks) ==> 1237320296:12
50: RAW: 70254592( 67 blks) ==> 1237320308:70254604
51: SKP: 1048576( 1 blks) ==> 1307574912:12
52: RAW: 26214400( 25 blks) ==> 1307574924:26214412
53: SKP: 3145728( 3 blks) ==> 1333789336:12
54: RAW: 15728640( 15 blks) ==> 1333789348:15728652
55: SKP: 1048576( 1 blks) ==> 1349518000:12
56: RAW: 41943040( 40 blks) ==> 1349518012:41943052
57: SKP: 1048576( 1 blks) ==> 1391461064:12
58: RAW: 65011712( 62 blks) ==> 1391461076:65011724
59: SKP: 1048576( 1 blks) ==> 1456472800:12
60: RAW: 32505856( 31 blks) ==> 1456472812:32505868
61: SKP: 1048576( 1 blks) ==> 1488978680:12
62: RAW: 16777216( 16 blks) ==> 1488978692:16777228
63: SKP: 25165824( 24 blks) ==> 1505755920:12
64: RAW: 12582912( 12 blks) ==> 1505755932:12582924
65: SKP: 390070272( 372 blks) ==> 1518338856:12
66: RAW: 10485760( 10 blks) ==> 1518338868:10485772
67: SKP: 23068672( 22 blks) ==> 1528824640:12
68: RAW: 12582912( 12 blks) ==> 1528824652:12582924
69: SKP: 88080384( 84 blks) ==> 1541407576:12
70: RAW: 428867584( 409 blks) ==> 1541407588:428867596
71: SKP: 644874240( 615 blks) ==> 1970275184:12
72: RAW: 1048576( 1 blks) ==> 1970275196:1048588
73: SKP: 267386880( 255 blks) ==> 1971323784:12
74: RAW: 1048576( 1 blks) ==> 1971323796:1048588
75: SKP: 670040064( 639 blks) ==> 1972372384:12
76: RAW: 7340032( 7 blks) ==> 1972372396:7340044
77: SKP: 26214400( 25 blks) ==> 1979712440:12
78: RAW: 15728640( 15 blks) ==> 1979712452:15728652
79: SKP: 84934656( 81 blks) ==> 1995441104:12
80: RAW: 336592896( 321 blks) ==> 1995441116:336592908
81: SKP: 1048576( 1 blks) ==> 2332034024:12
82: RAW: 869269504( 829 blks) ==> 2332034036:869269516
83: SKP: 1048576( 1 blks) ==> 3201303552:12
84: RAW: 32505856( 31 blks) ==> 3201303564:32505868
85: SKP: 772800512( 737 blks) ==> 3233809432:12
86: RAW: 5242880( 5 blks) ==> 3233809444:5242892
87: SKP: 28311552( 27 blks) ==> 3239052336:12
88: RAW: 16777216( 16 blks) ==> 3239052348:16777228
89: SKP: 83886080( 80 blks) ==> 3255829576:12
90: RAW: 1048576( 1 blks) ==> 3255829588:1048588
91: SKP: 3145728( 3 blks) ==> 3256878176:12
92: RAW: 521142272( 497 blks) ==> 3256878188:521142284
93: SKP: 11534336( 11 blks) ==> 3778020472:12
94: RAW: 7340032( 7 blks) ==> 3778020484:7340044
95: SKP: 1469054976( 1401 blks) ==> 3785360528:12
96: RAW: 5242880( 5 blks) ==> 3785360540:5242892
97: SKP: 28311552( 27 blks) ==> 3790603432:12
98: RAW: 14680064( 14 blks) ==> 3790603444:14680076
99: SKP: 85983232( 82 blks) ==> 3805283520:12
100: RAW: 167772160( 160 blks) ==> 3805283532:167772172
101: SKP: 33554432( 32 blks) ==> 3973055704:12
102: RAW: 4194304( 4 blks) ==> 3973055716:4194316
103: SKP: 1807745024( 1724 blks) ==> 3977250032:12
104: RAW: 9437184( 9 blks) ==> 3977250044:9437196
105: SKP: 24117248( 23 blks) ==> 3986687240:12
106: RAW: 14680064( 14 blks) ==> 3986687252:14680076
107: SKP: 85983232( 82 blks) ==> 4001367328:12
108: RAW: 1048576( 1 blks) ==> 4001367340:1048588
109: SKP: 3145728( 3 blks) ==> 4002415928:12
110: RAW: 250609664( 239 blks) ==> 4002415940:250609676
111: SKP: 1048576( 1 blks) ==> 4253025616:12
112: RAW: 1048576( 1 blks) ==> 4253025628:1048588
113: SKP: 1048576( 1 blks) ==> 4254074216:12
114: RAW: 75497472( 72 blks) ==> 4254074228:75497484
115: SKP: 2097152( 2 blks) ==> 4329571712:12
116: RAW: 33554432( 32 blks) ==> 4329571724:33554444
117: SKP: 1644167168( 1568 blks) ==> 4363126168:12
118: RAW: 5242880( 5 blks) ==> 4363126180:5242892
119: SKP: 28311552( 27 blks) ==> 4368369072:12
120: RAW: 13631488( 13 blks) ==> 4368369084:13631500
121: SKP: 87031808( 83 blks) ==> 4382000584:12
122: RAW: 140509184( 134 blks) ==> 4382000596:140509196
123: SKP: 1872756736( 1786 blks) ==> 4522509792:12
– Total: ---------------------------------------------------
124 CHUNK 15032385536( 14336 blks) ==> 4522509804(4313 blks)

done.
system.img built successfully.
Existing tbcfile(/home/james/nvidia/Linux_for_Tegra/bootloader/nvtboot_cpu.bin) reused.
copying tbcdtbfile(/home/james/nvidia/Linux_for_Tegra/kernel/dtb/tegra210-p3448-0002-p3449-0000-b00.dtb)… done.
copying cfgfile(/home/james/nvidia/Linux_for_Tegra/bootloader/t210ref/cfg/flash_l4t_t210_emmc_p3448.xml) to flash.xml… done.
copying flasher(/home/james/nvidia/Linux_for_Tegra/bootloader/t210ref/cboot.bin)… done.
Existing flashapp(/home/james/nvidia/Linux_for_Tegra/bootloader/tegraflash.py) reused.
./tegraflash.py --bl cboot.bin --bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.cfg --odmdata 0x94000 --bldtb tegra210-p3448-0002-p3449-0000-b00.dtb --applet nvtboot_recovery.bin --cmd “flash; reboot” --cfg flash.xml --chip 0x21 --skipuid --bins “EBT cboot.bin; DTB tegra210-p3448-0002-p3449-0000-b00.dtb”
saving flash command in /home/james/nvidia/Linux_for_Tegra/bootloader/flashcmd.txt
saving Windows flash command to /home/james/nvidia/Linux_for_Tegra/bootloader/flash_win.bat
*** Flashing target device started. ***
Welcome to Tegra Flash
version 1.0.0
Type ? or help for help and q or quit to exit
Use ! to execute system commands

[ 0.0238 ] tegrasign --key None --getmode mode.txt
[ 0.0255 ] Assuming zero filled SBK key
[ 0.0349 ]
[ 0.0350 ] Generating RCM messages
[ 0.0528 ] tegrarcm --listrcm rcm_list.xml --chip 0x21 0 --download rcm nvtboot_recovery.bin 0 0
[ 0.0545 ] RCM 0 is saved as rcm_0.rcm
[ 0.0781 ] RCM 1 is saved as rcm_1.rcm
[ 0.0788 ] List of rcm files are saved in rcm_list.xml
[ 0.0882 ]
[ 0.0883 ] Signing RCM messages
[ 0.0903 ] tegrasign --key None --list rcm_list.xml --pubkeyhash pub_key.key
[ 0.0919 ] Assuming zero filled SBK key
[ 0.1012 ]
[ 0.1012 ] Copying signature to RCM mesages
[ 0.1030 ] tegrarcm --chip 0x21 0 --updatesig rcm_list_signed.xml
[ 0.1054 ]
[ 0.1055 ] Parsing partition layout
[ 0.1318 ] tegraparser --pt flash.xml.tmp
[ 0.1352 ]
[ 0.1354 ] Creating list of images to be signed
[ 0.1502 ] tegrahost --chip 0x21 0 --partitionlayout flash.xml.bin --list images_list.xml
[ 0.2033 ]
[ 0.2035 ] Generating signatures
[ 0.2053 ] tegrasign --key None --list images_list.xml --pubkeyhash pub_key.key
[ 0.2070 ] Assuming zero filled SBK key
[ 0.3721 ]
[ 0.3723 ] Generating br-bct
[ 0.3995 ] tegrabct --bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.cfg --chip 0x21 0
[ 0.4013 ] Copying Sdram info from 0 to 1 set
[ 0.4179 ] Copying Sdram info from 1 to 2 set
[ 0.4179 ] Copying Sdram info from 2 to 3 set
[ 0.4180 ]
[ 0.4180 ] Updating boot device parameters
[ 0.4197 ] tegrabct --bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct --chip 0x21 0 --updatedevparam flash.xml.bin
[ 0.4213 ] Warning: No sdram params
[ 0.4217 ]
[ 0.4218 ] Updating bl info
[ 0.4233 ] tegrabct --bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct --chip 0x21 0 --updateblinfo flash.xml.bin --updatesig images_list_signed.xml
[ 0.4259 ]
[ 0.4260 ] Updating secondary storage information into bct
[ 0.4281 ] tegraparser --pt flash.xml.bin --chip 0x21 0 --updatecustinfo P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct
[ 0.4309 ]
[ 0.4309 ] Updating Odmdata
[ 0.4327 ] tegrabct --bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct --chip 0x21 0 --updatefields Odmdata =0x94000
[ 0.4343 ] Warning: No sdram params
[ 0.4352 ]
[ 0.4352 ] Get Signed section of bct
[ 0.4370 ] tegrabct --bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct --chip 0x21 0 --listbct bct_list.xml
[ 0.4389 ]
[ 0.4389 ] Signing BCT
[ 0.4423 ] tegrasign --key None --list bct_list.xml --pubkeyhash pub_key.key
[ 0.4439 ] Assuming zero filled SBK key
[ 0.4456 ]
[ 0.4456 ] Updating BCT with signature
[ 0.4474 ] tegrabct --bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct --chip 0x21 0 --updatesig bct_list_signed.xml
[ 0.4496 ]
[ 0.4497 ] Copying signatures
[ 0.4515 ] tegrahost --chip 0x21 0 --partitionlayout flash.xml.bin --updatesig images_list_signed.xml
[ 0.4685 ]
[ 0.4686 ] Updating BFS information on BCT
[ 0.4705 ] tegrabct --bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct --chip 0x21 0 --updatebfsinfo flash.xml.bin
[ 0.4721 ] BFS:
[ 0.4747 ] 0: [PT ] flash.xml.bin (size=4337/131072)
[ 0.4779 ] 1: [TBC] nvtboot_cpu.bin.encrypt (size=65760/196608)
[ 0.4821 ] 2: [RP1] tegra210-p3448-0002-p3449-0000-b00.dtb.encrypt (size=215808/1048576)
[ 0.4876 ] 3: [EBT] cboot.bin.encrypt (size=484304/655360)
[ 0.5003 ] 4: [WB0] warmboot.bin.encrypt (size=3952/131072)
[ 0.5068 ] 5: [BPF] sc7entry-firmware.bin.encrypt (size=3376/262144)
[ 0.5143 ] BFS0: 131072 @ 2560 SUM 46ccf681 over 2883584 bytes
[ 0.5186 ] BFS:
[ 0.5191 ] 0: [PT-1] flash.xml.bin (size=4337/131072)
[ 0.5221 ] 1: [TBC-1] nvtboot_cpu.bin.encrypt (size=65760/196608)
[ 0.5270 ] 2: [RP1-1] tegra210-p3448-0002-p3449-0000-b00.dtb.encrypt (size=215808/1048576)
[ 0.5368 ] 3: [EBT-1] cboot.bin.encrypt (size=484304/655360)
[ 0.5401 ] 4: [WB0-1] warmboot.bin.encrypt (size=3952/131072)
[ 0.5435 ] 5: [BPF-1] sc7entry-firmware.bin.encrypt (size=3376/262144)
[ 0.5473 ] BFS1: 131072 @ 8704 SUM 46ccf681 over 2883584 bytes
[ 0.5504 ] KFS:
[ 0.5508 ] 0: [DTB] tegra210-p3448-0002-p3449-0000-b00.dtb.encrypt (size=215808/1048576)
[ 0.5590 ] 1: [TOS] tos-mon-only.img.encrypt (size=54208/6291456)
[ 0.5626 ] 2: [EKS] eks.img (size=1028/81920)
[ 0.5651 ] 3: [LNX] boot.img.encrypt (size=483328/67092480)
[ 0.5683 ] KFS0: 1048576 @ 29376546 SUM 12d70118 over 7905280 bytes
[ 0.5717 ] KFS:
[ 0.6092 ] 0: [DTB-1] tegra210-p3448-0002-p3449-0000-b00.dtb.encrypt (size=215808/1048576)
[ 0.6142 ] 1: [TOS-1] tos-mon-only.img.encrypt (size=54208/6291456)
[ 0.6187 ] 2: [EKS-1] eks.img (size=1028/81920)
[ 0.6188 ] 3: [LNX-1] boot.img.encrypt (size=483328/67092480)
[ 0.6188 ] KFS1: 1048576 @ 29522082 SUM 12d70118 over 7905280 bytes
[ 0.6189 ]
[ 0.6190 ] Boot Rom communication
[ 0.6208 ] tegrarcm --chip 0x21 0 --rcm rcm_list_signed.xml --skipuid
[ 0.6223 ] RCM version 0X210001
[ 0.9453 ] Boot Rom communication completed
[ 1.9542 ]
[ 1.9543 ] Sending BCTs
[ 1.9564 ] tegrarcm --download bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct
[ 1.9582 ] Applet version 00.01.0000
[ 2.2411 ] Sending bct
[ 2.2414 ] […] 100%
[ 2.3263 ]
[ 2.3312 ] tegrahost --chip 0x21 --align cboot.bin
[ 2.3359 ]
[ 2.3378 ] tegrahost --magicid EBT --appendsigheader cboot.bin cboot.bin_blheader
[ 2.3427 ]
[ 2.3453 ] tegrasign --key None --list cboot.bin_list.xml
[ 2.3470 ] Assuming zero filled SBK key
[ 2.3731 ]
[ 2.3753 ] tegrahost --updatesigheader cboot.bin_blheader.encrypt cboot.bin_blheader.hash zerosbk
[ 2.3783 ]
[ 2.3816 ] tegrahost --chip 0x21 --align tegra210-p3448-0002-p3449-0000-b00.dtb
[ 2.3833 ]
[ 2.3851 ] tegrahost --magicid DTB --appendsigheader tegra210-p3448-0002-p3449-0000-b00.dtb tegra210-p3448-0002-p3449-0000-b00.dtb_blheader
[ 2.3885 ]
[ 2.3909 ] tegrasign --key None --list tegra210-p3448-0002-p3449-0000-b00.dtb_list.xml
[ 2.3926 ] Assuming zero filled SBK key
[ 2.4059 ]
[ 2.4079 ] tegrahost --updatesigheader tegra210-p3448-0002-p3449-0000-b00.dtb_blheader.encrypt tegra210-p3448-0002-p3449-0000-b00.dtb_blheader.hash zerosbk
[ 2.4101 ]
[ 2.4110 ] Sending bootloader and pre-requisite binaries
[ 2.4126 ] tegrarcm --download ebt cboot.bin.encrypt 0 0 --download rp1 tegra210-p3448-0002-p3449-0000-b00.dtb.encrypt 0
[ 2.4140 ] Applet version 00.01.0000
[ 2.7023 ] Sending ebt
[ 2.7819 ]
Error: Return value 1
Command tegrarcm --download ebt cboot.bin.encrypt 0 0 --download rp1 tegra210-p3448-0002-p3449-0000-b00.dtb.encrypt 0
Failed flashing t210ref.

41

Hi,

Hey, I just notice there are many conflicts in your statement…

You keep saying “your flash is fine” but it is obviously not. It is obvious that there is “Failed flashing t210ref”.

[ 2.7023 ] Sending ebt
[ 2.7819 ]
Error: Return value 1
Command tegrarcm --download ebt cboot.bin.encrypt 0 0 --download rp1 tegra210-p3448-0002-p3449-0000-b00.dtb.encrypt 0
Failed flashing t210ref.

Also, are you sure you are using a emmc module but not a sdcard module?

42

It has successfully flashed at times but never successfully booted. With the most recent procedure you supplied it didn’t flash correctly. It is definitely the production model with no SD card.

43

HI, jbuttenshaw

I think you can already access your I2C-EEPROM from U-Boot console.
Hit enter at following log and execute some U-Boot i2c commands.

U-Boot 2016.07-g0536cf2a27 (Dec 09 2019 - 22:40:32 -0800)
…
Hit any key to stop autoboot: 1 0

Our Production Board envirnoment can also access I2C-EEPROM like below.

U-Boot # i2c dev 3
Setting bus to 3

U-Boot # i2c probe
Valid chip addresses: 50

Dump entire eeprom…

U-Boot # i2c md 0x50 0x00 0x100
0000: 01 00 fc 00 78 0d 02 00 04 46 00 00 00 00 00 00 …x…F…
0010: 00 00 00 00 36 39 39 2d 31 33 34 34 38 2d 30 30 …699-13448-00
0020: 30 32 2d 34 30 30 20 46 2e 30 00 00 00 00 00 00 02-400 F.0…
0030: 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff …
0040: ff ff ff ff d1 d5 e9 4b 04 00 31 34 32 33 30 31 …K…142301
0050: 39 31 31 33 35 31 33 00 00 00 00 00 00 00 00 00 9113513…
0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 …
0070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 …
0080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 …
0090: 00 00 00 00 00 00 4e 56 43 42 1c 00 4d 31 00 00 …NVCB…M1…
00a0: ff ff ff ff ff ff ff ff ff ff ff ff d1 d5 e9 4b …K
00b0: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 …
00c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 …
00d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 …
00e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 …
00f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 15 …

So, if you want to overwrite 0xff’s checksum…

U-Boot # i2c mw 0x50 0xff 0x16
U-Boot # i2c md 0x50 0x00 0x100
0000: 01 00 fc 00 78 0d 02 00 04 46 00 00 00 00 00 00 …x…F…
0010: 00 00 00 00 36 39 39 2d 31 33 34 34 38 2d 30 30 …699-13448-00
0020: 30 32 2d 34 30 30 20 46 2e 30 00 00 00 00 00 00 02-400 F.0…
0030: 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff …
0040: ff ff ff ff d1 d5 e9 4b 04 00 31 34 32 33 30 31 …K…142301
0050: 39 31 31 33 35 31 33 00 00 00 00 00 00 00 00 00 9113513…
0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 …
0070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 …
0080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 …
0090: 00 00 00 00 00 00 4e 56 43 42 1c 00 4d 31 00 00 …NVCB…M1…
00a0: ff ff ff ff ff ff ff ff ff ff ff ff d1 d5 e9 4b …K
00b0: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 …
00c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 …
00d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 …
00e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 …
00f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 …

It seems your EEPROM CRC is invalid ,

[1855.700] EEPROM CRC failed. Calculated crc=0xc3 CRC stored = 0x67

So you should recovery EEPROM contents to factory default.
https://docs.nvidia.com/jetson/archives/l4t-archived/l4t-3231/index.html#page/Tegra%20Linux%20Driver%20Package%20Development%20Guide/jetson_eeprom_layout.html

I hope this helps.

44

Hi,

With the most recent procedure you supplied it didn’t flash correctly

Only the recent procedure is possible to resolve this issue. We don’t count those “successful flash” cases anymore. That nvtboot binary does not work on release > rel-32.2.

Also, please directly tell us what is your step and command to apply recent procedure.

You could also follow shinichiro.adachi’s suggestion here to use uboot to workaround this issue too.

But for me, I just want to know why the xml method does not work on your board.

45

Hi jbuttenshaw,

Have you resolved your issue?

46

No not yet, I don’t have a lot of time to work on this fix. Maybe over the next month or so.

The procedure I followed is in post #33. I followed it word for word, same files and everything.

Thanks

47

Hi jbuttenshaw,

Then I think you could try shinichiro.adachi’s method to correct the i2c eeprom through uboot.

49

I finally got around to fiddling with this more. Eventually what worked was following the steps in After i2cset test, nano can't boot in eMMC boot evironment - #24 by shinichiro.adachi but using R32.4.3 linux and rootfs. Once it flashed and booted successfully I used I2Cset, no boot - #43 by shinichiro.adachi to correct the i2c issues.

Thanks so much for all your help, sorry for the slow replies.

1 Like
50