I'm trying to use MicroSD on a custom carrier board

[WayneWWW]

Please compare your full dts with this one.

Booting from SD Card with a Jetson Nano production module

Hi, I’m trying to boot with my Jetson Nano production module and a customised carrier board from the SDCARD. With cold boot the system works fine. But with shutdown -r now the system show an error like: [IMG_8669.HEIC] [IMG_8670.HEIC] I have my Tegra210-porg-p3448-common.dtsi : sdhci@700b0400 { status = “okay”; /delete-property/ keep-power-in-suspend; /delete-property/ non-removable; mmc-ddr-1_8v; mmc-ocr-mask = <3>; uhs-mask = <0x0>; sd-uhs-sdr104; sd-uhs-sdr50; sd-uhs-sdr25; sd…

If all the properties are same, then we should check the hardware design.