Hi when I try to use
insmod mlx4_core.ko it is giving fallowing crash
-
1011.425132] []
msi_set_mask_bit+0x10/0xa8
[ 1011.430686] []
pci_msi_unmask_irq+0xc/0x18
[ 1011.436327] []
unmask_msi_irq+0x8/0x14
[ 1011.441625] []
irq_enable+0x28/0x64
[ 1011.446656] []
irq_startup+0x78/0x80
[ 1011.451778] []
__setup_irq+0x40c/0x470
[ 1011.457072] []
request_threaded_irq+0xc4/0x178
[ 1011.463085] []
mlx4_init_eq_table+0x5c4/0x650 [mlx4_core]
[ 1011.470024] []
mlx4_setup_hca+0x1e8/0x5a4 [mlx4_core]
[ 1011.476620] []
mlx4_load_one+0xb7c/0x11c4 [mlx4_core]
[ 1011.483217] []
mlx4_init_one+0x4ac/0x600 [mlx4_core]
[ 1011.489712] []
pci_device_probe+0x70/0xc8
[ 1011.495267] []
really_probe+0x6c/0x22c
[ 1011.500560] []
__driver_attach+0xa0/0xa8
[ 1011.506028] []
bus_for_each_dev+0x54/0x98
[ 1011.511583] []
driver_attach+0x1c/0x28
[ 1011.516878] []
bus_add_driver+0x14c/0x204
[ 1011.522433] []
driver_register+0x5c/0x11c
[ 1011.527989] []
__pci_register_driver+0x40/0x4c
[ 1011.533998] []
mlx4_init+0x148/0x178 [mlx4_core]
[ 1011.540142] []
do_one_initcall+0x88/0x1a0
[ 1011.545698] []
do_init_module+0x58/0x1b0
[ 1011.551166] []
load_module+0x140c/0x1be8
[ 1011.556633] []
SyS_init_module+0x128/0x140