Is wake on Lan supported?

[rfriedm]

My jetson nano works with wakeonlan, but the mac address is
00:00:00:00:00:01. If I had more than one device, I’d imagine there would be bad behavior.
Seems related to this thread:

MAC addresses

Hi guys, here is a script you can use to read the correct MAC address, and instructions on how to set it from software: nano-read-mac.sh (GitHub) #!/bin/bash # # This script reads the correct MAC address of a Jetson Nano from the onboard EEPROM over i2c. # First install i2c-tools package. Then make this script executable, and run it with sudo: # # $ sudo apt-get install i2c-tools # $ chmod +x nano-read-mac.sh # $ sudo ./nano-read-mac.sh # MAC address is xx:xx:xx:xx:xx:xx #…