J200 dual TX1 carrier New Product Feedback Wanted...

Technical details

carrier board for two NVIDIA Jetson TX1 compute modules
standalone or rack mount in Ross openGear frame
size: 316 x77 mm
power: 12V

Each TX1 module has the following peripherals:

M.2 key B 2242 slots (SATA) for inexpensive SSDs
M.2 key M 2280 slots (4x PCIe) for extreme performance SSDs
micro SD card
2 USB3 type A connectors (on the left)
1 USB2 type A connector (on the bottom left)
2 UARTs (3.3V TTL) - 4 pin PicoBlade
2 SPI (3.3V) - 9 pin Picoblade
1 I2C (3.3V) - 4 pin PicoBlade
JTAG header
fan connector (4 pin PicoBlade)
socket for the B100 HDMI to CSI-2 bridge (HDMI in up to 1080p60) - on the upper right
display port - on the lower right
RJ45 Gb Ethernet and eDP (on add-on module on the left above USB connectors - J22)
model: 38195

Forums

Please have a look at the discussion on http://diydrones.com/profiles/blog/show?id=705844%3ABlogPost%3A2128741&page=16#comments

Status

in design now
first prototypes end of Feb 2016
on display at the NVIDIA booth at the Embedded World show in Nuremberg

Auvidea.eu
http://auvidea.eu/index.php/2015-11-08-08-01-27/2016-02-03-12-30-02/j200-dual-jetson-tx1-carrier
email ds@auvidea.com

Here’s an image of the dual carrier from Auvidea’s website:

Looks awesome!! Will be exciting with the prototypes.
With this carrier and dual Jetson TX1 module, anyone can easily double their compute capacity to over 2 TFLOPS per platform!