J200 dual TX1 carrier New Product Feedback Wanted...

J200 dual TX1 carrier

Technical details

carrier board for two NVIDIA Jetson TX1 compute modules
standalone or rack mount in Ross openGear frame
size: 316 x77 mm
power: 12V

Each TX1 module has the following peripherals:

M.2 key B 2242 slots (SATA) for inexpensive SSDs
M.2 key M 2280 slots (4x PCIe) for extreme performance SSDs
micro SD card
2 USB3 type A connectors (on the left)
1 USB2 type A connector (on the bottom left)
2 UARTs (3.3V TTL) - 4 pin PicoBlade
2 SPI (3.3V) - 9 pin Picoblade
1 I2C (3.3V) - 4 pin PicoBlade
JTAG header
fan connector (4 pin PicoBlade)
socket for the B100 HDMI to CSI-2 bridge (HDMI in up to 1080p60) - on the upper right
display port - on the lower right
RJ45 Gb Ethernet and eDP (on add-on module on the left above USB connectors - J22)
model: 38195

Forums

Please have a look at the discussion on diydrones.com
http://diydrones.com/profiles/blog/show?id=705844%3ABlogPost%3A2128741&page=16#comments
Status

in design now
first prototypes end of Feb 2016
on display at the NVIDIA booth at the Embedded World show in Nuremberg

http://auvidea.eu/index.php/2015-11-08-08-01-27/2016-02-03-12-30-02/j200-dual-jetson-tx1-carrier

Email ds@auvidea.com