，自制载板，载板引脚连接没有改变。当不接SSD nvme时，能看到启动画面。VDD_3V3_SYS输出电压3.3V正常；但是插入SSD nvme时，VDD_3V3_SYS输出电压为0，不能启动，请问最大可能是什么问题。
No clue on this. It depends on your board design. You can compare your design to P3768_A04 schematic to try to find out root cause.
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.