Hi, I try to use usb hard disk in JetPack 4.3 L4T r32.3.1, but it cannot be mounted. I confirm my usb hard disk is good because it can work in PC or old JetPack version. Here’s kernel log [ 26.378331] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 26.403536] usb 2-1: New USB d…

Hi, From the log, it looks like the device is not recognized as mass storage device. Please check if you enable CONFIG_USB_STORAGE=y

JetPack 4.3 L4T r32.3.1 cannot use usb hard disk

DaneLLL May 21, 2020, 1:40am 11

Hi,
Please remove the config in tegra_defconfig

CONFIG_USB_UAS=y

We don’t enable it on r28. Please disable it and try.

USB 3.0 external HDD resetting and eventually becoming unavailiable

Xavier NX not recognizing certain ACM USB device

Topic		Replies	Views
Can not mount usb mass storage device on TX2 Jetson TX2	5	1152	September 5, 2019
Tx2 with the official carrier board, flashing r27.1 l4t, micro usb can not be used. Jetson TX2	20	1862	October 18, 2021
The TX2 cannot drive USB3.0 and PCIe devices Jetson TX2	36	5808	November 10, 2017
No usb after boot Jetson TX2	7	694	October 18, 2021
USB keyboard and mouse not working on Jetson TX2 Jetson TX2	29	7294	October 18, 2021
TX2 development kit linked to USB 3.0 hard disk, the system will crash Jetson TX2 usb	8	659	October 18, 2021
USB hub doesn't work with L4T R24.2.1 Jetson TX1	21	2242	May 3, 2017
Jetpack 4.2.1 breaks USB modem (driver issue?) Jetson TX2	23	3670	October 3, 2019
TX1 Jetpack4.4 how to use 2 port USB3.0 Jetson TX1 usb	12	1666	March 8, 2022
Ethernet1 and usb not working tx2 Jetson TX2	5	782	June 10, 2019