JetPack4.3 PCIE virtual ethernet performance issue

[omp]

PCIe bus error is likely due to cable that you are using.

You will need E3317 like TX/RX swap board.

Please refer to below document for detail specification about E3317 board:

Jetson_AGX_Xavier_PCIe_Endpoint_Design_Guidelines.pdf (1.9 MB)

Also go through this thread:

recommendation of TX/RX swap module for two Xavier boards?

Hi, I am working on connecting two Xavier boards. And I found in the document, NVIDIA JETSON AGX XAVIER PCIe ENDPOINT DESIGN GUIDELINES(attached to this post), it recommends the NVIDIA E3317_A0. But I found little information online about it. I was wondering whether I can ask for some recommendations for the Xaviers communication via PCIe. Thanks! Jetson_AGX_Xavier_PCIe_Endpoint_Design_Guidelines.pdf (1.9 MB)

Thanks,
Om