Jetson AGX Orin 64GB Dev Kit – Ethernet eno1 shows "unavailable"

Robotics & Edge Computing Jetson Systems Jetson AGX Orin
,
1

I am using a NVIDIA Jetson AGX Orin 64GB flashed using NVIDIA SDK Manager (JetPack 6.2.2).
The Ethernet interface eno1 is detected, but it is not getting an IP address.
(Link LEDs ON, no IP assigned)
Ethernet interface exists (eno1)

  1. RJ45 LEDs are ON (link lights active)
  2. Kernel version is correct (5.15.185-tegra)
  3. dhclient eno1 does not assign IP
4

There is no update from you for a period, assuming this is not an issue anymore.
Hence, we are closing this topic. If need further support, please open a new one.
Thanks ~0325

Hi,

Please run below commands to check en01 status and provide for us to review.

ip a show  eno1

Thanks