# Jetson AGX Orin fails to boot SDMMC on L4T 36.3.0

**URL:** <https://forums.developer.nvidia.com/t/jetson-agx-orin-fails-to-boot-sdmmc-on-l4t-36-3-0/384812>\
**Category:** Jetson AGX Orin\
**Tags:** boot\
**Created:** [October 1, 2026, 10:24am UTC](https://forums.developer.nvidia.com/t/jetson-agx-orin-fails-to-boot-sdmmc-on-l4t-36-3-0/384812 "2026-10-01T10:24:18Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![prodever](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@prodever](https://forums.developer.nvidia.com/u/prodever)\
**Post date:** [October 1, 2026, 10:24am UTC](https://forums.developer.nvidia.com/t/jetson-agx-orin-fails-to-boot-sdmmc-on-l4t-36-3-0/384812/1 "2026-10-01T10:24:18Z")

</div>

Hi,

I am using a **Jetson AGX Orin developer Kit** 32GB.  
With **L4T 36.3.0** , the board fails to boot at the SDMMC stage. However, the **same hardware boots successfully with L4T 36.4.3**.

Here is the boot log:

```auto
[16:50:53:481] I> MB2 (version: 0.0.0.0-t234-54845784-af79ed0a)␍␊
[16:50:53:481] I> t234-A01-1-Silicon (0x12347)␍␊
[16:50:53:489] I> Boot-mode : Coldboot␍␊
[16:50:53:489] I> Emulation: ␍␊
[16:50:53:489] I> Entry timestamp: 0x001e595f␍␊
[16:50:53:496] I> Regular heap: [base:0x40040000, size:0x10000]␍␊
[16:50:53:503] I> DMA heap: [base:0x82e000000, size:0x800000]␍␊
[16:50:53:503] I> Task: SE error check␍␊
[16:50:53:503] I> Task: Crypto init␍␊
[16:50:53:503] I> Task: MB2 Params integrity check␍␊
[16:50:53:509] I> Task: Enable CCPLEX WDT 5th expiry␍␊
[16:50:53:509] I> Task: ARI update carveout TZDRAM␍␊
[16:50:53:516] I> Task: Configure OEM set LA/PTSA values␍␊
[16:50:53:521] I> Task: Check MC errors␍␊
[16:50:53:521] I> Task: Enable hot-plug capability␍␊
[16:50:53:526] I> Task: PSC mailbox init␍␊
[16:50:53:526] I> Task: Enable clock for external modules␍␊
[16:50:53:533] I> Task: Measured Boot init␍␊
[16:50:53:533] I> Task: fTPM silicon identity init␍␊
[16:50:53:539] I> fTPM is not enabled.␍␊
[16:50:53:539] I> Task: OEM SC7 context save init␍␊
[16:50:53:544] I> Task: I2C register␍␊
[16:50:53:544] I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout␍␊
[16:50:53:550] I> Task: Program CBB PCIE AMAP regions␍␊
[16:50:53:550] I> Task: Boot device init␍␊
[16:50:53:556] I> Boot_device: QSPI_FLASH instance: 0␍␊
[16:50:53:556] I> Qspi clock source : pllc_out0␍␊
[16:50:53:562] I> QSPI Flash: Macronix 64MB␍␊
[16:50:53:562] I> QSPI-0l initialized successfully␍␊
[16:50:53:568] I> Secondary storage device: QSPI_FLASH instance: 0␍␊
[16:50:53:573] I> Secondary storage device: SDMMC_USER instance: 3␍␊
[16:50:53:595] C> Task 0x0 failed (err: 0x39390902)␍␊
[16:50:53:595] E> Top caller module: SDMMC, error module: SDMMC, reason: 0x02, aux_info: 0x09␍␊
[16:50:53:601] I> Busy Spin␍␊
[16:51:13:463] <break>
[16:51:13:520] <break>
[16:51:13:520] <0xff><0xe2>␍␊
[16:51:13:520] [0000.067] I> MB1 (version: 1.4.0.2-t234-54845784-08a4de08)␍␊
[16:51:13:529] [0000.072] I> t234-A01-1-Silicon (0x12347) Prod␍␊
[16:51:13:529] [0000.076] I> Boot-mode : Coldboot␍␊
[16:51:13:538] [0000.079] I> Entry timestamp: 0x00000000␍␊
[16:51:13:538] [0000.083] I> last_boot_error: 0x0␍␊
[16:51:13:538] [0000.086] I> BR-BCT: preprod_dev_sign: 0␍␊
[16:51:13:545] [0000.090] I> rst_source: 0x16, rst_level: 0x1␍␊
[16:51:13:553] [0000.094] I> Task: SE error check␍␊
[16:51:13:553] [0000.097] I> Task: Bootchain select WAR set␍␊
[16:51:13:558] [0000.101] I> Task: Enable SLCG␍␊
[16:51:13:558] [0000.104] I> Task: CRC check␍␊
[16:51:13:564] [0000.107] I> Task: Initialize MB2 params␍␊
[16:51:13:564] [0000.111] I> MB2-params @ 0x40060000␍␊
[16:51:13:570] [0000.115] I> Task: Crypto init␍␊
[16:51:13:578] [0000.118] I> Task: Perform MB1 KAT tests␍␊
[16:51:13:578] [0000.122] I> Task: NVRNG health check␍␊
[16:51:13:578] [0000.125] I> NVRNG: Health check success␍␊
[16:51:13:593] [0000.129] I> Task: MSS Bandwidth limiter settings for iGPU clients␍␊
[16:51:13:593] [0000.135] I> Task: Enabling and initialization of Bandwidth limiter␍␊
[16:51:13:599] [0000.141] I> No request to configure MBWT settings for any PC!␍␊
[16:51:13:606] [0000.147] I> Task: Secure debug controls␍␊
[16:51:13:606] [0000.151] I> Task: strap war set␍␊
[16:51:13:606] [0000.154] I> Task: Initialize SOC Therm␍␊
[16:51:13:613] [0000.157] I> Task: Program NV master stream id␍␊
[16:51:13:613] [0000.162] I> Task: Verify boot mode␍␊
[16:51:13:620] [0000.167] I> Task: Alias fuses␍␊
[16:51:13:627] [0000.171] W> FUSE_ALIAS: Fuse alias on production fused part is not supported.␍␊
[16:51:13:630] [0000.178] I> Task: Print SKU type␍␊
[16:51:13:630] [0000.181] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0␍␊
[16:51:13:637] [0000.187] I> FUSE_OPT_GPC_DISABLE = 0x00000000␍␊
[16:51:13:647] [0000.191] I> FUSE_OPT_TPC_DISABLE = 0x00000080␍␊
[16:51:13:656] [0000.195] I> FUSE_OPT_DLA_DISABLE = 0x00000000␍␊
[16:51:13:656] [0000.199] I> FUSE_OPT_PVA_DISABLE = 0x00000000␍␊
[16:51:13:656] [0000.204] I> FUSE_OPT_NVENC_DISABLE = 0x00000000␍␊
[16:51:13:665] [0000.208] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000␍␊
[16:51:13:665] [0000.213] I> FUSE_OPT_FSI_DISABLE = 0x00000000␍␊
[16:51:13:674] [0000.217] I> FUSE_OPT_EMC_DISABLE = 0x00000000␍␊
[16:51:13:674] [0000.221] I> FUSE_BOOTROM_PATCH_VERSION = 0x7␍␊
[16:51:13:681] [0000.225] I> FUSE_PSCROM_PATCH_VERSION = 0x7␍␊
[16:51:13:681] [0000.229] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2␍␊
[16:51:13:697] [0000.234] I> FUSE_SKU_INFO_0 = 0xd2␍␊
[16:51:13:697] [0000.237] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS ␍␊
[16:51:13:697] [0000.241] I> FUSE_PACKAGE_INFO_0 = 0x2␍␊
[16:51:13:706] [0000.245] I> SKU: Prod␍␊
[16:51:13:706] [0000.247] I> Task: Boost clocks␍␊
[16:51:13:706] [0000.250] I> Initializing NAFLL for BPMP_CPU_NIC.␍␊
[16:51:13:706] [0000.255] I> BPMP NAFLL: fll_lock = 1, dvco_min_reached = 0␍␊
[16:51:13:714] [0000.260] I> BPMP NAFLL lock success.␍␊
[16:51:13:725] [0000.264] I> BPMP_CPU_NIC : src = 42, divisor = 0␍␊
[16:51:13:725] [0000.268] I> Initializing PLLC2 for AXI_CBB.␍␊
[16:51:13:735] [0000.273] I> AXI_CBB : src = 35, divisor = 0␍␊
[16:51:13:735] [0000.277] I> Task: Voltage monitor␍␊
[16:51:13:735] [0000.280] I> VMON: Vmon re-calibration and fine tuning done␍␊
[16:51:13:743] [0000.285] I> Task: UPHY init␍␊
[16:51:13:743] [0000.290] I> HSIO UPHY init done␍␊
[16:51:13:752] [0000.293] W> Skipping GBE UPHY config␍␊
[16:51:13:752] [0000.297] I> Task: Boot device init␍␊
[16:51:13:752] [0000.300] I> Boot_device: QSPI_FLASH instance: 0␍␊
[16:51:13:760] [0000.305] I> Qspi clock source : pllc_out0␍␊
[16:51:13:767] [0000.309] I> QSPI Flash: Macronix 64MB␍␊
[16:51:13:767] [0000.313] I> QSPI-0l initialized successfully␍␊
[16:51:13:773] [0000.317] I> Task: TSC init␍␊
[16:51:13:773] [0000.320] I> Task: Load membct␍␊
[16:51:13:781] [0000.323] I> RAM_CODE 0x4000411␍␊
[16:51:13:781] [0000.326] I> Loading MEMBCT ␍␊
[16:51:13:781] [0000.328] I> Slot: 1␍␊
[16:51:13:781] [0000.330] I> Binary[0] block-66816 (partition size: 0x40000)␍␊
[16:51:13:788] [0000.336] I> Binary name: MEM-BCT-0␍␊
[16:51:13:796] [0000.339] I> Size of crypto header is 8192␍␊
[16:51:13:801] [0000.343] I> Size of crypto header is 8192␍␊
[16:51:13:801] [0000.347] I> strt_pg_num(66816) num_of_pgs(16) read_buf(0x40050000)␍␊
[16:51:13:808] [0000.353] I> BCH of MEM-BCT-0 read from storage␍␊
[16:51:13:808] [0000.358] I> BCH address is : 0x40050000␍␊
[16:51:13:814] [0000.362] I> MEM-BCT-0 header integrity check is success␍␊
[16:51:13:820] [0000.367] I> Binary magic in BCH component 0 is MEM0␍␊
[16:51:13:827] [0000.372] I> component binary type is 0␍␊
[16:51:13:827] [0000.375] I> strt_pg_num(66832) num_of_pgs(115) read_buf(0x40040000)␍␊
[16:51:13:833] [0000.382] I> MEM-BCT-0 binary is read from storage␍␊
[16:51:13:838] [0000.387] I> MEM-BCT-0 binary integrity check is success␍␊
[16:51:13:844] [0000.392] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580)␍␊
[16:51:13:850] [0000.399] I> RAM_CODE 0x4000411␍␊
[16:51:13:857] [0000.404] I> RAM_CODE 0x4000411␍␊
[16:51:13:857] [0000.408] I> Task: Load Page retirement list␍␊
[16:51:13:862] [0000.412] I> Task: SDRAM params override␍␊
[16:51:13:868] [0000.416] I> Task: Save mem-bct info␍␊
[16:51:13:868] [0000.419] I> Task: Carveout allocate␍␊
[16:51:13:874] [0000.423] I> RCM blob carveout will not be allocated␍␊
[16:51:13:879] [0000.428] I> Update CCPLEX IST carveout from MB1-BCT␍␊
[16:51:13:885] [0000.433] I> ECC region[0]: Start:0x0, End:0x0␍␊
[16:51:13:885] [0000.437] I> ECC region[1]: Start:0x0, End:0x0␍␊
[16:51:13:890] [0000.441] I> ECC region[2]: Start:0x0, End:0x0␍␊
[16:51:13:896] [0000.445] I> ECC region[3]: Start:0x0, End:0x0␍␊
[16:51:13:902] [0000.450] I> ECC region[4]: Start:0x0, End:0x0␍␊
[16:51:13:907] [0000.454] I> Non-ECC region[0]: Start:0x80000000, End:0x880000000␍␊
[16:51:13:913] [0000.460] I> Non-ECC region[1]: Start:0x0, End:0x0␍␊
[16:51:13:913] [0000.464] I> Non-ECC region[2]: Start:0x0, End:0x0␍␊
[16:51:13:918] [0000.469] I> Non-ECC region[3]: Start:0x0, End:0x0␍␊
[16:51:13:924] [0000.474] I> Non-ECC region[4]: Start:0x0, End:0x0␍␊
[16:51:13:936] [0000.484] I> allocated(CO:44) base:0x849800000 size:0x36800000 align: 0x100000␍␊
[16:51:13:941] [0000.492] I> allocated(CO:31) base:0x840000000 size:0x8000000 align: 0x8000000␍␊
[16:51:13:947] [0000.499] I> allocated(CO:43) base:0x83c000000 size:0x4000000 align: 0x200000␍␊
[16:51:13:958] [0000.506] I> allocated(CO:39) base:0x839e00000 size:0x2200000 align: 0x10000␍␊
[16:51:13:964] [0000.513] I> allocated(CO:20) base:0x836000000 size:0x2000000 align: 0x2000000␍␊
[16:51:13:969] [0000.520] I> allocated(CO:24) base:0x834000000 size:0x2000000 align: 0x2000000␍␊
[16:51:13:975] [0000.527] I> allocated(CO:28) base:0x832000000 size:0x2000000 align: 0x2000000␍␊
[16:51:13:986] [0000.534] I> allocated(CO:29) base:0x830000000 size:0x2000000 align: 0x2000000␍␊
[16:51:13:992] [0000.541] I> allocated(CO:22) base:0x848000000 size:0x1000000 align: 0x1000000␍␊
[16:51:13:998] [0000.548] I> allocated(CO:35) base:0x838e00000 size:0x1000000 align: 0x100000␍␊
[16:51:14:009] [0000.555] I> allocated(CO:41) base:0x82f000000 size:0x1000000 align: 0x100000␍␊
[16:51:14:014] [0000.562] I> allocated(CO:02) base:0x849000000 size:0x800000 align: 0x800000␍␊
[16:51:14:020] [0000.569] I> allocated(CO:03) base:0x838000000 size:0x800000 align: 0x800000␍␊
[16:51:14:026] [0000.576] I> allocated(CO:06) base:0x82e800000 size:0x800000 align: 0x800000␍␊
[16:51:14:031] [0000.583] I> allocated(CO:56) base:0x82e000000 size:0x800000 align: 0x200000␍␊
[16:51:14:042] [0000.590] I> allocated(CO:07) base:0x838800000 size:0x400000 align: 0x400000␍␊
[16:51:14:048] [0000.597] I> allocated(CO:33) base:0x82dc00000 size:0x400000 align: 0x200000␍␊
[16:51:14:054] [0000.604] I> allocated(CO:19) base:0x82d980000 size:0x280000 align: 0x10000␍␊
[16:51:14:059] [0000.611] I> allocated(CO:23) base:0x838c00000 size:0x200000 align: 0x200000␍␊
[16:51:14:071] [0000.618] I> allocated(CO:01) base:0x82d800000 size:0x100000 align: 0x100000␍␊
[16:51:14:076] [0000.625] I> allocated(CO:05) base:0x82d700000 size:0x100000 align: 0x100000␍␊
[16:51:14:082] [0000.632] I> allocated(CO:08) base:0x82d600000 size:0x100000 align: 0x100000␍␊
[16:51:14:088] [0000.639] I> allocated(CO:09) base:0x82d500000 size:0x100000 align: 0x100000␍␊
[16:51:14:099] [0000.646] I> allocated(CO:12) base:0x82d400000 size:0x100000 align: 0x100000␍␊
[16:51:14:104] [0000.653] I> allocated(CO:15) base:0x82d300000 size:0x100000 align: 0x100000␍␊
[16:51:14:110] [0000.659] I> allocated(CO:17) base:0x82d200000 size:0x100000 align: 0x100000␍␊
[16:51:14:116] [0000.666] I> allocated(CO:27) base:0x82d100000 size:0x100000 align: 0x100000␍␊
[16:51:14:127] [0000.673] I> allocated(CO:42) base:0x82d000000 size:0x100000 align: 0x100000␍␊
[16:51:14:132] [0000.680] I> allocated(CO:54) base:0x82d900000 size:0x80000 align: 0x80000␍␊
[16:51:14:138] [0000.687] I> allocated(CO:34) base:0x82cff0000 size:0x10000 align: 0x10000␍␊
[16:51:14:144] [0000.694] I> allocated(CO:72) base:0x82cdf0000 size:0x200000 align: 0x10000␍␊
[16:51:14:149] [0000.701] I> allocated(CO:47) base:0x82c800000 size:0x400000 align: 0x200000␍␊
[16:51:14:161] [0000.708] I> allocated(CO:50) base:0x82c600000 size:0x200000 align: 0x100000␍␊
[16:51:14:166] [0000.715] I> allocated(CO:52) base:0x82cdc0000 size:0x30000 align: 0x10000␍␊
[16:51:14:172] [0000.721] I> allocated(CO:48) base:0x82cda0000 size:0x20000 align: 0x10000␍␊
[16:51:14:178] [0000.728] I> allocated(CO:69) base:0x82cd80000 size:0x20000 align: 0x10000␍␊
[16:51:14:183] [0000.735] I> allocated(CO:49) base:0x82cd70000 size:0x10000 align: 0x10000␍␊
[16:51:14:194] [0000.742] I> NSDRAM base: 0x80000000, end: 0x82cdf0000, size: 0x7acdf0000␍␊
[16:51:14:200] [0000.748] I> Task: Thermal check␍␊
[16:51:14:200] [0000.751] I> Using min_chip_limit as min_tmon_limit␍␊
[16:51:14:206] [0000.756] I> Using max_chip_limit as max_tmon_limit␍␊
[16:51:14:211] [0000.761] I> BCT max_tmon_limit = 105␍␊
[16:51:14:217] [0000.764] I> BCT min_tmon_limit = -28␍␊
[16:51:14:217] [0000.768] I> BCT max_tmon_limit = 105␍␊
[16:51:14:222] [0000.771] I> BCT min_tmon_limit = -28␍␊
[16:51:14:228] [0000.775] I> SKU specific max_chip_limit = 105␍␊
[16:51:14:228] [0000.779] I> SKU specific min_chip_limit = -28␍␊
[16:51:14:234] [0000.783] I> BCT max_chip_limit = 105␍␊
[16:51:14:240] [0000.787] I> BCT min_chip_limit = -28␍␊
[16:51:14:240] [0000.790] I> enable_soctherm_polling = 0␍␊
[16:51:14:245] [0000.794] I> max temp read = 36␍␊
[16:51:14:251] [0000.797] I> min temp read = 36␍␊
[16:51:14:251] [0000.800] I> Enabling thermtrip␍␊
[16:51:14:257] [0000.803] I> Task: Update FSI SCR with thermal fuse data␍␊
[16:51:14:263] [0000.808] I> Task: Enable WDT 5th expiry␍␊
[16:51:14:263] [0000.812] I> Task: I2C register␍␊
[16:51:14:268] [0000.815] I> Task: Set I2C bus freq␍␊
[16:51:14:268] [0000.818] I> Task: Reset FSI␍␊
[16:51:14:274] [0000.821] I> Task: Pinmux init␍␊
[16:51:14:274] [0000.824] I> Task: Prod config init␍␊
[16:51:14:280] [0000.828] I> Task: Pad voltage init␍␊
[16:51:14:286] [0000.831] I> Task: Prod init␍␊
[16:51:14:286] [0000.834] I> Task: Program rst req config reg␍␊
[16:51:14:291] [0000.838] I> Task: Common rail init␍␊
[16:51:14:291] [0000.841] I> DONE: Thermal config␍␊
[16:51:14:297] [0000.845] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod.␍␊
[16:51:14:303] [0000.853] I> DONE: SOC rail config␍␊
[16:51:14:309] [0000.857] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT.␍␊
[16:51:14:315] [0000.863] I> DONE: MEMIO rail config␍␊
[16:51:14:321] [0000.867] I> DONE: GPU rail info␍␊
[16:51:14:321] [0000.870] I> DONE: CV rail info␍␊
[16:51:14:327] [0000.873] I> Task: Mem clock src␍␊
[16:51:14:327] [0000.876] I> Task: Misc. board config␍␊
[16:51:14:332] [0000.880] I> PMIC_CONFIG: Platform config not found in MB1 BCT.␍␊
[16:51:14:338] [0000.886] I> Task: SDRAM init␍␊
[16:51:14:338] [0000.888] I> MemoryType: 4 MemBctRevision: 9␍␊
[16:51:14:346] [0000.895] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 9␍␊
[16:51:14:351] [0000.903] I> MSS CAR: Init PLLM␍␊
[16:51:14:359] [0000.906] I> MSS CAR: Init PLLHUB␍␊
[16:51:14:359] [0000.910] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en␍␊
[16:51:14:370] [0000.922] I> SDRAM initialized!␍␊
[16:51:14:376] [0000.925] I> SDRAM Size in Total 0x800000000␍␊
[16:51:14:381] [0000.929] I> Task: Dram Ecc scrub␍␊
[16:51:14:381] [0000.932] I> Task: DRAM alias check␍␊
[16:51:14:394] [0000.942] I> Task: Program NSDRAM carveout␍␊
[16:51:14:399] [0000.946] I> NSDRAM carveout encryption is enabled␍␊
[16:51:14:399] [0000.951] I> Program NSDRAM carveout␍␊
[16:51:14:405] [0000.954] I> Task: Register checker␍␊
[16:51:14:422] [0000.958] I> Task: Enable clock-mon␍␊
[16:51:14:422] [0000.972] I> FMON: Fmon re-programming done␍␊
[16:51:14:427] [0000.976] I> Task: Mapper init␍␊
[16:51:14:427] [0000.979] I> Task: SC7 Context Init␍␊
[16:51:14:433] [0000.982] I> Task: CCPLEX IST init␍␊
[16:51:14:439] [0000.986] I> Task: CPU WP0␍␊
[16:51:14:439] [0000.989] I> Loading MCE␍␊
[16:51:14:439] [0000.991] I> Slot: 1␍␊
[16:51:14:445] [0000.993] I> Binary[8] block-85760 (partition size: 0x80000)␍␊
[16:51:14:450] [0000.999] I> Binary name: MCE␍␊
[16:51:14:450] [0001.001] I> Size of crypto header is 8192␍␊
[16:51:14:456] [0001.005] I> Size of crypto header is 8192␍␊
[16:51:14:462] [0001.009] I> strt_pg_num(85760) num_of_pgs(16) read_buf(0x4003e000)␍␊
[16:51:14:467] [0001.016] I> BCH of MCE read from storage␍␊
[16:51:14:467] [0001.019] I> BCH address is : 0x4003e000␍␊
[16:51:14:473] [0001.023] I> MCE header integrity check is success␍␊
[16:51:14:479] [0001.028] I> Binary magic in BCH component 0 is MTSM␍␊
[16:51:14:484] [0001.033] I> component binary type is 8␍␊
[16:51:14:490] [0001.036] I> Size of crypto header is 8192␍␊
[16:51:14:490] [0001.040] I> strt_pg_num(85776) num_of_pgs(350) read_buf(0x40000000)␍␊
[16:51:14:498] [0001.049] I> MCE binary is read from storage␍␊
[16:51:14:504] [0001.053] I> MCE binary integrity check is success␍␊
[16:51:14:509] [0001.058] I> Binary MCE loaded successfully at 0x40000000 (0x2baf0)␍␊
[16:51:14:515] [0001.064] I> Size of crypto header is 8192␍␊
[16:51:14:527] [0001.075] I> Size of crypto header is 8192␍␊
[16:51:14:527] [0001.079] I> Sending WP0 mailbox command to PSC␍␊
[16:51:14:538] [0001.088] I> Task: XUSB Powergate␍␊
[16:51:14:543] [0001.091] I> Skipping powergate XUSB.␍␊
[16:51:14:543] [0001.095] I> Task: MB1 fixed firewalls␍␊
[16:51:14:552] [0001.101] W> Firewall readback mismatch␍␊
[16:51:14:559] [0001.106] I> Task: Load bpmp-fw␍␊
[16:51:14:559] [0001.109] I> Slot: 1␍␊
[16:51:14:564] [0001.111] I> Binary[15] block-72960 (partition size: 0x180000)␍␊
[16:51:14:570] [0001.117] I> Binary name: BPMP_FW␍␊
[16:51:14:570] [0001.120] I> Size of crypto header is 8192␍␊
[16:51:14:575] [0001.124] I> Size of crypto header is 8192␍␊
[16:51:14:581] [0001.128] I> strt_pg_num(72960) num_of_pgs(16) read_buf(0x807fe000)␍␊
[16:51:14:587] [0001.134] I> BCH of BPMP_FW read from storage␍␊
[16:51:14:587] [0001.138] I> BCH address is : 0x807fe000␍␊
[16:51:14:592] [0001.142] I> BPMP_FW header integrity check is success␍␊
[16:51:14:599] [0001.147] I> Binary magic in BCH component 0 is BPMF␍␊
[16:51:14:605] [0001.152] I> component binary type is 15␍␊
[16:51:14:605] [0001.156] I> Size of crypto header is 8192␍␊
[16:51:14:611] [0001.159] I> strt_pg_num(72976) num_of_pgs(1990) read_buf(0x80000000)␍␊
[16:51:14:626] [0001.177] I> BPMP_FW binary is read from storage␍␊
[16:51:14:634] [0001.183] I> BPMP_FW binary integrity check is success␍␊
[16:51:14:643] [0001.188] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xf8bc0)␍␊
[16:51:14:651] [0001.195] I> Slot: 1␍␊
[16:51:14:651] [0001.197] I> Binary[16] block-76032 (partition size: 0x400000)␍␊
[16:51:14:660] [0001.203] I> Binary name: BPMP_FW_DTB␍␊
[16:51:14:660] [0001.206] I> Size of crypto header is 8192␍␊
[16:51:14:673] [0001.210] I> Size of crypto header is 8192␍␊
[16:51:14:673] [0001.214] I> strt_pg_num(76032) num_of_pgs(16) read_buf(0x807fc000)␍␊
[16:51:14:682] [0001.220] I> BCH of BPMP_FW_DTB read from storage␍␊
[16:51:14:682] [0001.225] I> BCH address is : 0x807fc000␍␊
[16:51:14:682] [0001.229] I> BPMP_FW_DTB header integrity check is success␍␊
[16:51:14:691] [0001.234] I> Binary magic in BCH component 0 is BPMD␍␊
[16:51:14:691] [0001.239] I> component binary type is 16␍␊
[16:51:14:698] [0001.242] I> Size of crypto header is 8192␍␊
[16:51:14:698] [0001.246] I> strt_pg_num(76048) num_of_pgs(736) read_buf(0x8079fff0)␍␊
[16:51:14:707] [0001.257] I> BPMP_FW_DTB binary is read from storage␍␊
[16:51:14:715] [0001.262] I> BPMP_FW_DTB binary integrity check is success␍␊
[16:51:14:724] [0001.268] I> Binary BPMP_FW_DTB loaded successfully at 0x8079fff0 (0x5bf00)␍␊
[16:51:14:724] [0001.275] I> Task: BPMP fw ast config␍␊
[16:51:14:732] [0001.278] I> Task: Load psc-fw␍␊
[16:51:14:741] [0001.281] I> Slot: 1␍␊
[16:51:14:741] [0001.283] I> Binary[17] block-84224 (partition size: 0xc0000)␍␊
[16:51:14:741] [0001.289] I> Binary name: PSC_FW␍␊
[16:51:14:741] [0001.292] I> Size of crypto header is 8192␍␊
[16:51:14:750] [0001.296] I> Size of crypto header is 8192␍␊
[16:51:14:760] [0001.299] I> strt_pg_num(84224) num_of_pgs(16) read_buf(0x80ffe000)␍␊
[16:51:14:760] [0001.306] I> BCH of PSC_FW read from storage␍␊
[16:51:14:769] [0001.310] I> BCH address is : 0x80ffe000␍␊
[16:51:14:769] [0001.314] I> PSC_FW header integrity check is success␍␊
[16:51:14:769] [0001.319] I> Binary magic in BCH component 0 is PFWP␍␊
[16:51:14:776] [0001.323] I> component binary type is 17␍␊
[16:51:14:785] [0001.327] I> Size of crypto header is 8192␍␊
[16:51:14:785] [0001.331] I> strt_pg_num(84240) num_of_pgs(591) read_buf(0x80fb4200)␍␊
[16:51:14:794] [0001.341] I> PSC_FW binary is read from storage␍␊
[16:51:14:794] [0001.346] I> PSC_FW binary integrity check is success␍␊
[16:51:14:804] [0001.351] I> Binary PSC_FW loaded successfully at 0x80fb4200 (0x49df0)␍␊
[16:51:14:813] [0001.357] I> Task: Load nvdec-fw␍␊
[16:51:14:813] [0001.360] I> Slot: 1␍␊
[16:51:14:813] [0001.362] I> Binary[7] block-69376 (partition size: 0x100000)␍␊
[16:51:14:823] [0001.368] I> Binary name: NVDEC␍␊
[16:51:14:823] [0001.371] I> Size of crypto header is 8192␍␊
[16:51:14:831] [0001.375] I> Size of crypto header is 8192␍␊
[16:51:14:831] [0001.378] I> strt_pg_num(69376) num_of_pgs(16) read_buf(0x800fe000)␍␊
[16:51:14:842] [0001.385] I> BCH of NVDEC read from storage␍␊
[16:51:14:842] [0001.389] I> BCH address is : 0x800fe000␍␊
[16:51:14:852] [0001.393] I> NVDEC header integrity check is success␍␊
[16:51:14:852] [0001.397] I> Binary magic in BCH component 0 is NDEC␍␊
[16:51:14:852] [0001.402] I> component binary type is 7␍␊
[16:51:14:861] [0001.406] I> Size of crypto header is 8192␍␊
[16:51:14:870] [0001.410] I> strt_pg_num(69392) num_of_pgs(560) read_buf(0x80000000)␍␊
[16:51:14:876] [0001.419] I> NVDEC binary is read from storage␍␊
[16:51:14:882] [0001.424] I> NVDEC binary integrity check is success␍␊
[16:51:14:882] [0001.429] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000)␍␊
[16:51:14:895] [0001.435] I> Size of crypto header is 8192␍␊
[16:51:14:895] [0001.447] I> Task: Load tsec-fw␍␊
[16:51:14:901] [0001.450] I> TSEC-FW load support not enabled␍␊
[16:51:14:907] [0001.454] I> Task: GPIO interrupt map␍␊
[16:51:14:907] [0001.458] I> Task: SC7 context save␍␊
[16:51:14:913] [0001.461] I> Slot: 1␍␊
[16:51:14:913] [0001.463] I> Binary[27] block-0 (partition size: 0x100000)␍␊
[16:51:14:919] [0001.468] I> Binary name: BR_BCT␍␊
[16:51:14:926] [0001.471] I> Size of crypto header is 8192␍␊
[16:51:14:926] [0001.475] I> Size of crypto header is 8192␍␊
[16:51:14:933] [0001.479] I> Size of crypto header is 8192␍␊
[16:51:14:939] [0001.483] I> strt_pg_num(0) num_of_pgs(16) read_buf(0xa0000000)␍␊
[16:51:14:945] [0001.489] I> BR_BCT binary is read from storage␍␊
[16:51:14:950] [0001.493] I> BR_BCT binary integrity check is success␍␊
[16:51:14:956] [0001.498] I> Binary BR_BCT loaded successfully at 0xa0000000 (0x2000)␍␊
[16:51:14:961] [0001.505] I> Slot: 1␍␊
[16:51:14:961] [0001.507] I> Binary[13] block-86784 (partition size: 0x30000)␍␊
[16:51:14:967] [0001.512] I> Binary name: SC7-FW␍␊
[16:51:14:974] [0001.515] I> Size of crypto header is 8192␍␊
[16:51:14:974] [0001.519] I> Size of crypto header is 8192␍␊
[16:51:14:981] [0001.523] I> Size of crypto header is 8192␍␊
[16:51:14:981] [0001.527] I> Size of crypto header is 8192␍␊
[16:51:14:981] [0001.531] I> strt_pg_num(86784) num_of_pgs(16) read_buf(0xa0002000)␍␊
[16:51:14:988] [0001.537] I> BCH of SC7-FW read from storage␍␊
[16:51:14:996] [0001.541] I> BCH address is : 0xa0002000␍␊
[16:51:15:002] [0001.545] I> SC7-FW header integrity check is success␍␊
[16:51:15:002] [0001.550] I> Binary magic in BCH component 0 is WB0B␍␊
[16:51:15:009] [0001.555] I> component binary type is 13␍␊
[16:51:15:009] [0001.559] I> Size of crypto header is 8192␍␊
[16:51:15:017] [0001.563] I> strt_pg_num(86800) num_of_pgs(349) read_buf(0xa0004000)␍␊
[16:51:15:024] [0001.571] I> SC7-FW binary is read from storage␍␊
[16:51:15:033] [0001.576] I> SC7-FW binary integrity check is success␍␊
[16:51:15:033] [0001.580] I> Binary SC7-FW loaded successfully at 0xa0004000 (0x2b920)␍␊
[16:51:15:042] [0001.587] I> Slot: 1␍␊
[16:51:15:042] [0001.589] I> Binary[22] block-87168 (partition size: 0x30000)␍␊
[16:51:15:051] [0001.594] I> Binary name: PSC_RF␍␊
[16:51:15:051] [0001.598] I> Size of crypto header is 8192␍␊
[16:51:15:059] [0001.601] I> Size of crypto header is 8192␍␊
[16:51:15:059] [0001.605] I> Size of crypto header is 8192␍␊
[16:51:15:065] [0001.609] I> Size of crypto header is 8192␍␊
[16:51:15:076] [0001.613] I> strt_pg_num(87168) num_of_pgs(16) read_buf(0xa002f920)␍␊
[16:51:15:076] [0001.620] I> BCH of PSC_RF read from storage␍␊
[16:51:15:076] [0001.624] I> BCH address is : 0xa002f920␍␊
[16:51:15:085] [0001.627] I> PSC_RF header integrity check is success␍␊
[16:51:15:085] [0001.632] I> Binary magic in BCH component 0 is PSCR␍␊
[16:51:15:095] [0001.637] I> component binary type is 22␍␊
[16:51:15:095] [0001.641] I> Size of crypto header is 8192␍␊
[16:51:15:095] [0001.645] I> strt_pg_num(87184) num_of_pgs(224) read_buf(0xa0031920)␍␊
[16:51:15:108] [0001.652] I> PSC_RF binary is read from storage␍␊
[16:51:15:108] [0001.657] I> PSC_RF binary integrity check is success␍␊
[16:51:15:119] [0001.662] I> Binary PSC_RF loaded successfully at 0xa0031920 (0x1be60)␍␊
[16:51:15:129] [0001.671] I> Task: Save WP0 payload to SC7 ctx␍␊
[16:51:15:129] [0001.676] I> Task: Load MB2rf binary to SC7 ctx␍␊
[16:51:15:138] [0001.680] I> Slot: 1␍␊
[16:51:15:138] [0001.682] I> Binary[14] block-87552 (partition size: 0x20000)␍␊
[16:51:15:138] [0001.688] I> Binary name: MB2_RF␍␊
[16:51:15:148] [0001.691] I> Size of crypto header is 8192␍␊
[16:51:15:148] [0001.695] I> Size of crypto header is 8192␍␊
[16:51:15:157] [0001.699] I> Size of crypto header is 8192␍␊
[16:51:15:157] [0001.702] I> Size of crypto header is 8192␍␊
[16:51:15:157] [0001.706] I> strt_pg_num(87552) num_of_pgs(16) read_buf(0xa00d5d10)␍␊
[16:51:15:165] [0001.713] I> BCH of MB2_RF read from storage␍␊
[16:51:15:174] [0001.717] I> BCH address is : 0xa00d5d10␍␊
[16:51:15:174] [0001.721] I> MB2_RF header integrity check is success␍␊
[16:51:15:184] [0001.725] I> Binary magic in BCH component 0 is MB2R␍␊
[16:51:15:184] [0001.730] I> component binary type is 14␍␊
[16:51:15:184] [0001.734] I> Size of crypto header is 8192␍␊
[16:51:15:193] [0001.738] I> strt_pg_num(87568) num_of_pgs(224) read_buf(0xa00d7d10)␍␊
[16:51:15:202] [0001.746] I> MB2_RF binary is read from storage␍␊
[16:51:15:202] [0001.750] I> MB2_RF binary integrity check is success␍␊
[16:51:15:211] [0001.755] I> Binary MB2_RF loaded successfully at 0xa00d7d10 (0x1bf30)␍␊
[16:51:15:221] [0001.761] I> Task: Save fuse alias data to SC7 ctx␍␊
[16:51:15:221] [0001.766] I> Task: Save PMIC data to SC7 ctx␍␊
[16:51:15:221] [0001.770] I> Task: Save Pinmux data to SC7 ctx␍␊
[16:51:15:230] [0001.774] I> Task: Save Pad Voltage data to SC7 ctx␍␊
[16:51:15:230] [0001.779] I> Task: Save controller prod data to SC7 ctx␍␊
[16:51:15:240] [0001.784] I> Task: Save prod cfg data to SC7 ctx␍␊
[16:51:15:249] [0001.789] I> Task: Save I2C bus freq data to SC7 ctx␍␊
[16:51:15:249] [0001.793] I> Task: Save SOCTherm data to SC7 ctx␍␊
[16:51:15:249] [0001.798] I> Task: Save FMON data to SC7 ctx␍␊
[16:51:15:257] [0001.802] I> Task: Save VMON data to SC7 ctx␍␊
[16:51:15:264] [0001.806] I> Task: Save TZDRAM data to SC7 ctx␍␊
[16:51:15:264] [0001.810] I> Task: Save GPIO int data to SC7 ctx␍␊
[16:51:15:264] [0001.815] I> Task: Save clock data to SC7 ctx␍␊
[16:51:15:272] [0001.819] I> Task: Save debug data to SC7 ctx␍␊
[16:51:15:279] [0001.823] I> Task: Save MBWT data to SC7 ctx␍␊
[16:51:15:284] [0001.831] I> SC7 context save done␍␊
[16:51:15:284] [0001.835] I> Task: Load MB2/Applet/FSKP␍␊
[16:51:15:291] [0001.838] I> Loading MB2␍␊
[16:51:15:291] [0001.841] I> Slot: 1␍␊
[16:51:15:297] [0001.843] I> Binary[6] block-71424 (partition size: 0x80000)␍␊
[16:51:15:306] [0001.848] I> Binary name: MB2␍␊
[16:51:15:306] [0001.851] I> Size of crypto header is 8192␍␊
[16:51:15:313] [0001.855] I> Size of crypto header is 8192␍␊
[16:51:15:313] [0001.859] I> strt_pg_num(71424) num_of_pgs(16) read_buf(0x8007e000)␍␊
[16:51:15:320] [0001.865] I> BCH of MB2 read from storage␍␊
[16:51:15:320] [0001.869] I> BCH address is : 0x8007e000␍␊
[16:51:15:326] [0001.873] I> MB2 header integrity check is success␍␊
[16:51:15:332] [0001.877] I> Binary magic in BCH component 0 is MB2B␍␊
[16:51:15:339] [0001.882] I> component binary type is 6␍␊
[16:51:15:339] [0001.886] I> Size of crypto header is 8192␍␊
[16:51:15:345] [0001.890] I> strt_pg_num(71440) num_of_pgs(844) read_buf(0x80000000)␍␊
[16:51:15:351] [0001.901] I> MB2 binary is read from storage␍␊
[16:51:15:357] [0001.906] I> MB2 binary integrity check is success␍␊
[16:51:15:362] [0001.910] I> Binary MB2 loaded successfully at 0x80000000 (0x696a0)␍␊
[16:51:15:368] [0001.917] I> Task: Map CCPLEX SHARED carveout␍␊
[16:51:15:375] [0001.921] I> Task: Prepare MB2 params␍␊
[16:51:15:375] [0001.925] I> Task: Dram ecc test␍␊
[16:51:15:382] [0001.928] I> Task: Misc NV security settings␍␊
[16:51:15:390] [0001.932] I> NVDEC sticky bits programming done␍␊
[16:51:15:390] [0001.936] I> Successfully powergated NVDEC␍␊
[16:51:15:397] [0001.940] I> Task: Disable/Reload WDT␍␊
[16:51:15:397] [0001.944] I> Task: Program misc carveouts␍␊
[16:51:15:397] [0001.948] I> Program IPC carveouts␍␊
[16:51:15:404] [0001.951] I> Task: Disable SCPM/POD reset␍␊
[16:51:15:412] [0001.955] I> SLCG Global override status := 0x0␍␊
[16:51:15:412] [0001.959] I> MB1: MSS reconfig completed␍␊
[16:51:15:468] I> MB2 (version: 0.0.0.0-t234-54845784-af79ed0a)␍␊
[16:51:15:468] I> t234-A01-1-Silicon (0x12347)␍␊
[16:51:15:478] I> Boot-mode : Coldboot␍␊
[16:51:15:478] I> Emulation: ␍␊
[16:51:15:478] I> Entry timestamp: 0x001e5c5e␍␊
[16:51:15:489] I> Regular heap: [base:0x40040000, size:0x10000]␍␊
[16:51:15:489] I> DMA heap: [base:0x82e000000, size:0x800000]␍␊
[16:51:15:489] I> Task: SE error check␍␊
[16:51:15:498] I> Task: Crypto init␍␊
[16:51:15:498] I> Task: MB2 Params integrity check␍␊
[16:51:15:498] I> Task: Enable CCPLEX WDT 5th expiry␍␊
[16:51:15:498] I> Task: ARI update carveout TZDRAM␍␊
[16:51:15:505] I> Task: Configure OEM set LA/PTSA values␍␊
[16:51:15:512] I> Task: Check MC errors␍␊
[16:51:15:512] I> Task: Enable hot-plug capability␍␊
[16:51:15:517] I> Task: PSC mailbox init␍␊
[16:51:15:517] I> Task: Enable clock for external modules␍␊
[16:51:15:523] I> Task: Measured Boot init␍␊
[16:51:15:523] I> Task: fTPM silicon identity init␍␊
[16:51:15:529] I> fTPM is not enabled.␍␊
[16:51:15:529] I> Task: OEM SC7 context save init␍␊
[16:51:15:535] I> Task: I2C register␍␊
[16:51:15:535] I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout␍␊
[16:51:15:541] I> Task: Program CBB PCIE AMAP regions␍␊
[16:51:15:541] I> Task: Boot device init␍␊
[16:51:15:547] I> Boot_device: QSPI_FLASH instance: 0␍␊
[16:51:15:547] I> Qspi clock source : pllc_out0␍␊
[16:51:15:547] I> QSPI Flash: Macronix 64MB␍␊
[16:51:15:547] I> QSPI-0l initialized successfully␍␊
[16:51:15:553] I> Secondary storage device: QSPI_FLASH instance: 0␍␊
[16:51:15:559] I> Secondary storage device: SDMMC_USER instance: 3␍␊
[16:51:15:583] C> Task 0x0 failed (err: 0x39390902)␍␊
[16:51:15:583] E> Top caller module: SDMMC, error module: SDMMC, reason: 0x02, aux_info: 0x09␍␊
[16:51:15:588] I> Busy Spin␍␊

```

I would like to know what could cause this SDMMC error in L4T 36.3.0, and whether there are any known differences between 36.3.0 and 36.4.3 related to SDMMC/MB2.

Thanks.

---

<div class="post-metadata">

**Author:** ![DavidDDD](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/davidddd/32/370680_2.png) [@DavidDDD](https://forums.developer.nvidia.com/u/DavidDDD)\
**Post date:** [October 1, 2026, 1:11pm UTC](https://forums.developer.nvidia.com/t/jetson-agx-orin-fails-to-boot-sdmmc-on-l4t-36-3-0/384812/4 "2026-10-01T13:11:59Z")

</div>

Hi,

Please refer to [Log in | NVIDIA Developer](https://developer.nvidia.com/embedded/jetson-pcn-center#iylox2-2) to get the corresponding PCN.

Thanks

---

<div class="post-metadata">

**Author:** ![system](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/system/32/68080_2.png) [@system](https://forums.developer.nvidia.com/u/system)\
**Post date:** [October 27, 2026, 5:21am UTC](https://forums.developer.nvidia.com/t/jetson-agx-orin-fails-to-boot-sdmmc-on-l4t-36-3-0/384812/6 "2026-10-27T05:21:17Z")

</div>

Closed on October 27, 2026, 5:21am UTC

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.
