Hi,
Please plug out the cable and try other port on your host.
Also, check your “lsusb” command on your host to see if there is anything new after you plug in the usb cable.
If there is nothing new comes, please check the “dmesg” command on your host and see if it prints anything new after you plug in the usb cable.
“dmesg” is the kernel log on your host. If there is a valid usb device connected, no matter what situation, it should print some logs (even error log is log…).
Hi,
elektrorazvoj@elektrorazvoj-System-Product-Name:~$ lsusb
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 1a2c:2c27 China Resource Semico Co., Ltd USB Keyboard
Bus 001 Device 002: ID 09da:3878 A4Tech Co., Ltd. USB Device
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
elektrorazvoj@elektrorazvoj-System-Product-Name:~$ dmesg
[ 0.000000] microcode: microcode updated early to revision 0xf0, date = 2021-11-12
[ 0.000000] Linux version 5.15.0-83-generic (buildd@lcy02-amd64-046) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #92~20.04.1-Ubuntu SMP Mon Aug 21 14:00:49 UTC 2023 (Ubuntu 5.15.0-83.92~20.04.1-generic 5.15.116)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-83-generic root=UUID=00e36340-9e32-45e8-8825-34e98773cedc ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b8280fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b8281000-0x00000000b82b6fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b82b7000-0x00000000b8658fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b8659000-0x00000000b8659fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b865a000-0x00000000b865afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b865b000-0x00000000c5316fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c5317000-0x00000000c6a4ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c6a50000-0x00000000c6a62fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000c6a63000-0x00000000c6c1dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c6c1e000-0x00000000c7245fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c7246000-0x00000000c7afefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c7aff000-0x00000000c7afffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7b00000-0x00000000c7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000836ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0xb35fa018-0xb3620457] usable ==> usable
[ 0.000000] e820: update [mem 0xb35fa018-0xb3620457] usable ==> usable
[ 0.000000] e820: update [mem 0xb35e9018-0xb35f9e57] usable ==> usable
[ 0.000000] e820: update [mem 0xb35e9018-0xb35f9e57] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000b35e9017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b35e9018-0x00000000b35f9e57] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b35f9e58-0x00000000b35fa017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b35fa018-0x00000000b3620457] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b3620458-0x00000000b8280fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b8281000-0x00000000b82b6fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000b82b7000-0x00000000b8658fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b8659000-0x00000000b8659fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000b865a000-0x00000000b865afff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000b865b000-0x00000000c5316fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c5317000-0x00000000c6a4ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000c6a50000-0x00000000c6a62fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000c6a63000-0x00000000c6c1dfff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c6c1e000-0x00000000c7245fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000c7246000-0x00000000c7afefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000c7aff000-0x00000000c7afffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c7b00000-0x00000000c7ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x0000000836ffffff] usable
[ 0.000000] efi: EFI v2.50 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0xb8281000 ACPI=0xb8281000 SMBIOS=0xc7a02000 SMBIOS 3.0=0xc7a01000 ESRT=0xc3920858 MOKvar=0xc740b000
[ 0.000000] secureboot: Secure boot enabled
[ 0.000000] Kernel is locked down from EFI Secure Boot mode; see man kernel_lockdown.7
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: System manufacturer System Product Name/Z170 PRO GAMING, BIOS 3501 06/23/2017
[ 0.000000] tsc: Detected 4000.000 MHz processor
[ 0.000000] tsc: Detected 3999.984 MHz TSC
[ 0.000505] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000508] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000516] last_pfn = 0x837000 max_arch_pfn = 0x400000000
[ 0.000626] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001201] last_pfn = 0xc7b00 max_arch_pfn = 0x400000000
[ 0.006528] found SMP MP-table at [mem 0x000fcc70-0x000fcc7f]
[ 0.006537] esrt: Reserving ESRT space from 0x00000000c3920858 to 0x00000000c3920890.
[ 0.006541] e820: update [mem 0xc3920000-0xc3920fff] usable ==> reserved
[ 0.006556] Using GB pages for direct mapping
[ 0.006991] secureboot: Secure boot enabled
[ 0.006992] RAMDISK: [mem 0xb3621000-0xb7ca4fff]
[ 0.006996] ACPI: Early table checksum verification disabled
[ 0.006999] ACPI: RSDP 0x00000000B8281000 000024 (v02 ALASKA)
[ 0.007002] ACPI: XSDT 0x00000000B82810A8 0000C4 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.007006] ACPI: FACP 0x00000000B82AA480 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.007010] ACPI: DSDT 0x00000000B8281200 02927E (v02 ALASKA A M I 01072009 INTL 20160422)
[ 0.007013] ACPI: FACS 0x00000000C7245C40 000040
[ 0.007015] ACPI: APIC 0x00000000B82AA598 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.007018] ACPI: FPDT 0x00000000B82AA658 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.007020] ACPI: BGRT 0x00000000B82B5DB0 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.007022] ACPI: MCFG 0x00000000B82AA6F8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.007025] ACPI: SSDT 0x00000000B82AA738 000390 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.007027] ACPI: FIDT 0x00000000B82AAAC8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.007030] ACPI: SSDT 0x00000000B82AAB68 003041 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.007032] ACPI: SSDT 0x00000000B82ADBB0 002544 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
[ 0.007035] ACPI: HPET 0x00000000B82B00F8 000038 (v01 INTEL SKL 00000001 MSFT 0000005F)
[ 0.007037] ACPI: SSDT 0x00000000B82B0130 000E3B (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
[ 0.007040] ACPI: SSDT 0x00000000B82B0F70 000B19 (v02 INTEL xh_rvp08 00000000 INTL 20160422)
[ 0.007042] ACPI: UEFI 0x00000000B82B1A90 000042 (v01 INTEL EDK2 00000002 01000013)
[ 0.007044] ACPI: SSDT 0x00000000B82B1AD8 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.007047] ACPI: LPIT 0x00000000B82B29B8 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
[ 0.007049] ACPI: WSMT 0x00000000B82B2A50 000028 (v01 INTEL SKL 00000000 MSFT 0000005F)
[ 0.007052] ACPI: SSDT 0x00000000B82B2A78 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.007054] ACPI: SSDT 0x00000000B82B2D18 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.007056] ACPI: DBGP 0x00000000B82B5D20 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.007059] ACPI: DBG2 0x00000000B82B5D58 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.007061] ACPI: Reserving FACP table memory at [mem 0xb82aa480-0xb82aa593]
[ 0.007062] ACPI: Reserving DSDT table memory at [mem 0xb8281200-0xb82aa47d]
[ 0.007063] ACPI: Reserving FACS table memory at [mem 0xc7245c40-0xc7245c7f]
[ 0.007064] ACPI: Reserving APIC table memory at [mem 0xb82aa598-0xb82aa653]
[ 0.007064] ACPI: Reserving FPDT table memory at [mem 0xb82aa658-0xb82aa69b]
[ 0.007065] ACPI: Reserving BGRT table memory at [mem 0xb82b5db0-0xb82b5de7]
[ 0.007066] ACPI: Reserving MCFG table memory at [mem 0xb82aa6f8-0xb82aa733]
[ 0.007067] ACPI: Reserving SSDT table memory at [mem 0xb82aa738-0xb82aaac7]
[ 0.007067] ACPI: Reserving FIDT table memory at [mem 0xb82aaac8-0xb82aab63]
[ 0.007068] ACPI: Reserving SSDT table memory at [mem 0xb82aab68-0xb82adba8]
[ 0.007069] ACPI: Reserving SSDT table memory at [mem 0xb82adbb0-0xb82b00f3]
[ 0.007070] ACPI: Reserving HPET table memory at [mem 0xb82b00f8-0xb82b012f]
[ 0.007071] ACPI: Reserving SSDT table memory at [mem 0xb82b0130-0xb82b0f6a]
[ 0.007071] ACPI: Reserving SSDT table memory at [mem 0xb82b0f70-0xb82b1a88]
[ 0.007072] ACPI: Reserving UEFI table memory at [mem 0xb82b1a90-0xb82b1ad1]
[ 0.007073] ACPI: Reserving SSDT table memory at [mem 0xb82b1ad8-0xb82b29b5]
[ 0.007074] ACPI: Reserving LPIT table memory at [mem 0xb82b29b8-0xb82b2a4b]
[ 0.007075] ACPI: Reserving WSMT table memory at [mem 0xb82b2a50-0xb82b2a77]
[ 0.007075] ACPI: Reserving SSDT table memory at [mem 0xb82b2a78-0xb82b2d16]
[ 0.007076] ACPI: Reserving SSDT table memory at [mem 0xb82b2d18-0xb82b5d19]
[ 0.007077] ACPI: Reserving DBGP table memory at [mem 0xb82b5d20-0xb82b5d53]
[ 0.007078] ACPI: Reserving DBG2 table memory at [mem 0xb82b5d58-0xb82b5dab]
[ 0.007228] No NUMA configuration found
[ 0.007229] Faking a node at [mem 0x0000000000000000-0x0000000836ffffff]
[ 0.007237] NODE_DATA(0) allocated [mem 0x836fd6000-0x836ffffff]
[ 0.007428] Zone ranges:
[ 0.007428] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.007430] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.007431] Normal [mem 0x0000000100000000-0x0000000836ffffff]
[ 0.007432] Device empty
[ 0.007433] Movable zone start for each node
[ 0.007435] Early memory node ranges
[ 0.007436] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.007437] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.007438] node 0: [mem 0x0000000000100000-0x00000000b8280fff]
[ 0.007439] node 0: [mem 0x00000000b82b7000-0x00000000b8658fff]
[ 0.007439] node 0: [mem 0x00000000b865b000-0x00000000c5316fff]
[ 0.007440] node 0: [mem 0x00000000c6a63000-0x00000000c6c1dfff]
[ 0.007441] node 0: [mem 0x00000000c7aff000-0x00000000c7afffff]
[ 0.007441] node 0: [mem 0x0000000100000000-0x0000000836ffffff]
[ 0.007444] Initmem setup node 0 [mem 0x0000000000001000-0x0000000836ffffff]
[ 0.007447] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.007448] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.007463] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.010993] On node 0, zone DMA32: 54 pages in unavailable ranges
[ 0.011247] On node 0, zone DMA32: 2 pages in unavailable ranges
[ 0.011298] On node 0, zone DMA32: 5964 pages in unavailable ranges
[ 0.011329] On node 0, zone DMA32: 3809 pages in unavailable ranges
[ 0.048646] On node 0, zone Normal: 1280 pages in unavailable ranges
[ 0.048681] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.049006] ACPI: PM-Timer IO Port: 0x1808
[ 0.049012] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.049013] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.049014] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.049015] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.049015] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.049016] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.049017] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.049017] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.049043] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.049045] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.049046] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.049049] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.049050] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.049055] e820: update [mem 0xc24f2000-0xc2543fff] usable ==> reserved
[ 0.049067] TSC deadline timer available
[ 0.049068] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.049084] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.049086] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.049088] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.049089] PM: hibernation: Registered nosave memory: [mem 0xb35e9000-0xb35e9fff]
[ 0.049090] PM: hibernation: Registered nosave memory: [mem 0xb35f9000-0xb35f9fff]
[ 0.049091] PM: hibernation: Registered nosave memory: [mem 0xb35fa000-0xb35fafff]
[ 0.049092] PM: hibernation: Registered nosave memory: [mem 0xb3620000-0xb3620fff]
[ 0.049094] PM: hibernation: Registered nosave memory: [mem 0xb8281000-0xb82b6fff]
[ 0.049095] PM: hibernation: Registered nosave memory: [mem 0xb8659000-0xb8659fff]
[ 0.049096] PM: hibernation: Registered nosave memory: [mem 0xb865a000-0xb865afff]
[ 0.049097] PM: hibernation: Registered nosave memory: [mem 0xc24f2000-0xc2543fff]
[ 0.049099] PM: hibernation: Registered nosave memory: [mem 0xc3920000-0xc3920fff]
[ 0.049100] PM: hibernation: Registered nosave memory: [mem 0xc5317000-0xc6a4ffff]
[ 0.049101] PM: hibernation: Registered nosave memory: [mem 0xc6a50000-0xc6a62fff]
[ 0.049102] PM: hibernation: Registered nosave memory: [mem 0xc6c1e000-0xc7245fff]
[ 0.049103] PM: hibernation: Registered nosave memory: [mem 0xc7246000-0xc7afefff]
[ 0.049104] PM: hibernation: Registered nosave memory: [mem 0xc7b00000-0xc7ffffff]
[ 0.049105] PM: hibernation: Registered nosave memory: [mem 0xc8000000-0xf7ffffff]
[ 0.049105] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.049106] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfdffffff]
[ 0.049107] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.049107] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.049108] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.049108] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.049109] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.049110] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.049110] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.049111] [mem 0xc8000000-0xf7ffffff] available for PCI devices
[ 0.049112] Booting paravirtualized kernel on bare hardware
[ 0.049114] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.049120] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.049239] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144
[ 0.049245] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152
[ 0.049247] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.049271] Built 1 zonelists, mobility grouping on. Total pages: 8242312
[ 0.049272] Policy zone: Normal
[ 0.049273] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-83-generic root=UUID=00e36340-9e32-45e8-8825-34e98773cedc ro quiet splash vt.handoff=7
[ 0.049341] Unknown kernel command line parameters “splash BOOT_IMAGE=/boot/vmlinuz-5.15.0-83-generic”, will be passed to user space.
[ 0.050343] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[ 0.050851] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.050937] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.109040] Memory: 32509368K/33493216K available (16393K kernel code, 4386K rwdata, 10840K rodata, 3352K init, 18732K bss, 983588K reserved, 0K cma-reserved)
[ 0.109883] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.109913] Kernel/User page tables isolation: enabled
[ 0.109956] ftrace: allocating 50151 entries in 196 pages
[ 0.128320] ftrace: allocated 196 pages with 3 groups
[ 0.128461] rcu: Hierarchical RCU implementation.
[ 0.128462] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.128463] Rude variant of Tasks RCU enabled.
[ 0.128464] Tracing variant of Tasks RCU enabled.
[ 0.128464] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.128465] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.132145] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[ 0.132568] random: crng init done
[ 0.132588] Console: colour dummy device 80x25
[ 0.132601] printk: console [tty0] enabled
[ 0.132615] ACPI: Core revision 20210730
[ 0.132808] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.132873] APIC: Switch to symmetric I/O mode setup
[ 0.134074] x2apic: IRQ remapping doesn’t support X2APIC mode
[ 0.138310] …TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.156895] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x73509d9fa88, max_idle_ns: 881590914879 ns
[ 0.156900] Calibrating delay loop (skipped), value calculated using timer frequency… 7999.96 BogoMIPS (lpj=15999936)
[ 0.156914] x86/cpu: VMX (outside TXT) disabled by BIOS
[ 0.156917] x86/cpu: SGX disabled by BIOS.
[ 0.156921] CPU0: Thermal monitoring enabled (TM1)
[ 0.156965] process: using mwait in idle threads
[ 0.156966] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.156967] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.156970] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.156972] Spectre V2 : Mitigation: IBRS
[ 0.156972] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.156973] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.156974] RETBleed: Mitigation: IBRS
[ 0.156975] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.156976] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.156977] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.156983] MDS: Mitigation: Clear CPU buffers
[ 0.156983] TAA: Mitigation: TSX disabled
[ 0.156984] MMIO Stale Data: Mitigation: Clear CPU buffers
[ 0.156988] SRBDS: Mitigation: Microcode
[ 0.156995] x86/fpu: Supporting XSAVE feature 0x001: ‘x87 floating point registers’
[ 0.156996] x86/fpu: Supporting XSAVE feature 0x002: ‘SSE registers’
[ 0.156997] x86/fpu: Supporting XSAVE feature 0x004: ‘AVX registers’
[ 0.156998] x86/fpu: Supporting XSAVE feature 0x008: ‘MPX bounds registers’
[ 0.156999] x86/fpu: Supporting XSAVE feature 0x010: ‘MPX CSR’
[ 0.157001] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.157002] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.157004] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.157005] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using ‘compacted’ format.
[ 0.177638] Freeing SMP alternatives memory: 40K
[ 0.177640] pid_max: default: 32768 minimum: 301
[ 0.180925] LSM: Security Framework initializing
[ 0.180934] landlock: Up and running.
[ 0.180934] Yama: becoming mindful.
[ 0.180948] AppArmor: AppArmor initialized
[ 0.180989] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.181012] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.184950] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1024
[ 0.184961] smpboot: CPU0: Intel(R) Core™ i7-6700K CPU @ 4.00GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.185057] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.185065] … version: 4
[ 0.185066] … bit width: 48
[ 0.185066] … generic registers: 4
[ 0.185067] … value mask: 0000ffffffffffff
[ 0.185068] … max period: 00007fffffffffff
[ 0.185068] … fixed-purpose events: 3
[ 0.185069] … event mask: 000000070000000f
[ 0.185131] signal: max sigframe size: 2032
[ 0.185146] rcu: Hierarchical SRCU implementation.
[ 0.185792] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.185839] smp: Bringing up secondary CPUs …
[ 0.185904] x86: Booting SMP configuration:
[ 0.185904] … node #0, CPUs: #1 #2 #3 #4
[ 0.193343] MDS CPU bug present and SMT on, data leak possible. See MDS - Microarchitectural Data Sampling — The Linux Kernel documentation for more details.
[ 0.193343] MMIO Stale Data CPU bug present and SMT on, data leak possible. See Processor MMIO Stale Data Vulnerabilities — The Linux Kernel documentation for more details.
[ 0.193343] #5 #6 #7
[ 0.193402] smp: Brought up 1 node, 8 CPUs
[ 0.193402] smpboot: Max logical packages: 1
[ 0.193402] smpboot: Total of 8 processors activated (63999.74 BogoMIPS)
[ 0.197715] devtmpfs: initialized
[ 0.197715] x86/mm: Memory block size: 128MB
[ 0.198710] ACPI: PM: Registering ACPI NVS region [mem 0xb8659000-0xb8659fff] (4096 bytes)
[ 0.198710] ACPI: PM: Registering ACPI NVS region [mem 0xc6c1e000-0xc7245fff] (6455296 bytes)
[ 0.198710] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.198710] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.198710] pinctrl core: initialized pinctrl subsystem
[ 0.198710] PM: RTC time: 08:01:37, date: 2023-09-05
[ 0.198710] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.198710] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[ 0.201017] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.201190] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.201201] audit: initializing netlink subsys (disabled)
[ 0.201212] audit: type=2000 audit(1693900897.068:1): state=initialized audit_enabled=0 res=1
[ 0.201212] thermal_sys: Registered thermal governor ‘fair_share’
[ 0.201212] thermal_sys: Registered thermal governor ‘bang_bang’
[ 0.201212] thermal_sys: Registered thermal governor ‘step_wise’
[ 0.201212] thermal_sys: Registered thermal governor ‘user_space’
[ 0.201212] thermal_sys: Registered thermal governor ‘power_allocator’
[ 0.201212] EISA bus registered
[ 0.201212] cpuidle: using governor ladder
[ 0.201212] cpuidle: using governor menu
[ 0.201212] ACPI FADT declares the system doesn’t support PCIe ASPM, so disable it
[ 0.201212] ACPI: bus type PCI registered
[ 0.201212] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.201212] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.201212] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.201212] PCI: Using configuration type 1 for base access
[ 0.202556] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.202559] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.202559] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.202559] fbcon: Taking over console
[ 0.202559] ACPI: Added _OSI(Module Device)
[ 0.202559] ACPI: Added _OSI(Processor Device)
[ 0.202559] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.202559] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.202559] ACPI: Added OSI(Linux-Dell-Video)
[ 0.202559] ACPI: Added OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.202559] ACPI: Added OSI(Linux-HPI-Hybrid-Graphics)
[ 0.245051] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.247672] ACPI: [Firmware Bug]: BIOS OSI(Linux) query ignored
[ 0.251651] ACPI: Dynamic OEM Table Load:
[ 0.251656] ACPI: SSDT 0xFFFF92F9C1549000 0007DD (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.253605] ACPI: _PR.CPU0: OSC native thermal LVT Acked
[ 0.254971] ACPI: Dynamic OEM Table Load:
[ 0.254975] ACPI: SSDT 0xFFFF92F9C0F70800 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.257089] ACPI: Dynamic OEM Table Load:
[ 0.257094] ACPI: SSDT 0xFFFF92F9C154B000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.258678] ACPI: Dynamic OEM Table Load:
[ 0.258681] ACPI: SSDT 0xFFFF92F9C02C6C00 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.263127] ACPI: EC: EC started
[ 0.263128] ACPI: EC: interrupt blocked
[ 0.263144] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.263146] ACPI: _SB.PCI0.LPCB.EC0: Boot DSDT EC used to handle transactions
[ 0.263147] ACPI: Interpreter enabled
[ 0.263177] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.263177] ACPI: Using IOAPIC for interrupt routing
[ 0.263207] PCI: Using host bridge windows from ACPI; if necessary, use “pci=nocrs” and report a bug
[ 0.263208] PCI: Using E820 reservations for host bridge windows
[ 0.264191] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.267007] ACPI: PM: Power Resource [PG00]
[ 0.267378] ACPI: PM: Power Resource [PG01]
[ 0.267743] ACPI: PM: Power Resource [PG02]
[ 0.270680] ACPI: PM: Power Resource [WRST]
[ 0.270993] ACPI: PM: Power Resource [WRST]
[ 0.271303] ACPI: PM: Power Resource [WRST]
[ 0.271613] ACPI: PM: Power Resource [WRST]
[ 0.271923] ACPI: PM: Power Resource [WRST]
[ 0.272233] ACPI: PM: Power Resource [WRST]
[ 0.273103] ACPI: PM: Power Resource [WRST]
[ 0.273414] ACPI: PM: Power Resource [WRST]
[ 0.273724] ACPI: PM: Power Resource [WRST]
[ 0.274033] ACPI: PM: Power Resource [WRST]
[ 0.274342] ACPI: PM: Power Resource [WRST]
[ 0.274655] ACPI: PM: Power Resource [WRST]
[ 0.274966] ACPI: PM: Power Resource [WRST]
[ 0.275278] ACPI: PM: Power Resource [WRST]
[ 0.275591] ACPI: PM: Power Resource [WRST]
[ 0.275903] ACPI: PM: Power Resource [WRST]
[ 0.276216] ACPI: PM: Power Resource [WRST]
[ 0.278209] ACPI: PM: Power Resource [WRST]
[ 0.278519] ACPI: PM: Power Resource [WRST]
[ 0.278831] ACPI: PM: Power Resource [WRST]
[ 0.290646] ACPI: PM: Power Resource [FN00]
[ 0.290722] ACPI: PM: Power Resource [FN01]
[ 0.290793] ACPI: PM: Power Resource [FN02]
[ 0.290865] ACPI: PM: Power Resource [FN03]
[ 0.290936] ACPI: PM: Power Resource [FN04]
[ 0.292207] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.292214] acpi PNP0A08:00: OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.292252] acpi PNP0A08:00: OSC: platform retains control of PCIe features (AE_ERROR)
[ 0.293559] PCI host bridge to bus 0000:00
[ 0.293561] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.293563] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.293564] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.293566] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.293567] pci_bus 0000:00: root bus resource [mem 0xc8000000-0xf7ffffff window]
[ 0.293568] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.293695] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
[ 0.293991] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.294041] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.294583] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.294606] pci 0000:00:14.0: reg 0x10: [mem 0xf7230000-0xf723ffff 64bit]
[ 0.294678] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.295367] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.295392] pci 0000:00:16.0: reg 0x10: [mem 0xf724d000-0xf724dfff 64bit]
[ 0.295463] pci 0000:00:16.0: PME# supported from D3hot
[ 0.295824] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 0.295842] pci 0000:00:17.0: reg 0x10: [mem 0xf7248000-0xf7249fff]
[ 0.295852] pci 0000:00:17.0: reg 0x14: [mem 0xf724c000-0xf724c0ff]
[ 0.295861] pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
[ 0.295871] pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
[ 0.295881] pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
[ 0.295890] pci 0000:00:17.0: reg 0x24: [mem 0xf724b000-0xf724b7ff]
[ 0.295926] pci 0000:00:17.0: PME# supported from D3hot
[ 0.296288] pci 0000:00:1b.0: [8086:a167] type 01 class 0x060400
[ 0.296911] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.297573] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[ 0.297647] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.298313] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[ 0.298391] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.299044] pci 0000:00:1f.0: [8086:a145] type 00 class 0x060100
[ 0.299492] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.299512] pci 0000:00:1f.2: reg 0x10: [mem 0xf7244000-0xf7247fff]
[ 0.299896] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[ 0.299925] pci 0000:00:1f.3: reg 0x10: [mem 0xf7240000-0xf7243fff 64bit]
[ 0.299966] pci 0000:00:1f.3: reg 0x20: [mem 0xf7220000-0xf722ffff 64bit]
[ 0.300013] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.301208] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.301269] pci 0000:00:1f.4: reg 0x10: [mem 0xf724a000-0xf724a0ff 64bit]
[ 0.301338] pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
[ 0.301738] pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
[ 0.301763] pci 0000:00:1f.6: reg 0x10: [mem 0xf7200000-0xf721ffff]
[ 0.301882] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.302132] pci 0000:01:00.0: [10de:2204] type 00 class 0x030000
[ 0.302146] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.302158] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.302170] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.302178] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.302186] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.302200] pci 0000:01:00.0: BAR 1: assigned to efifb
[ 0.302204] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.302231] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 0.302267] pci 0000:01:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:01.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[ 0.302320] pci 0000:01:00.1: [10de:1aef] type 00 class 0x040300
[ 0.302335] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.302447] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.302449] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.302451] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.302453] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.302504] acpiphp: Slot [1] registered
[ 0.302510] pci 0000:00:1b.0: PCI bridge to [bus 02]
[ 0.302578] pci 0000:03:00.0: [1b21:1242] type 00 class 0x0c0330
[ 0.302608] pci 0000:03:00.0: reg 0x10: [mem 0xf7100000-0xf7107fff 64bit]
[ 0.302674] pci 0000:03:00.0: enabling Extended Tags
[ 0.302747] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.303089] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.303092] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.303144] acpiphp: Slot [1-1] registered
[ 0.303154] pci 0000:00:1d.0: PCI bridge to [bus 04]
[ 0.305704] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.305758] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.305811] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.305864] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.305917] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[ 0.305970] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[ 0.306023] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 0.306076] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ 0.313746] ACPI: EC: interrupt unblocked
[ 0.313747] ACPI: EC: event unblocked
[ 0.313756] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.313757] ACPI: EC: GPE=0x23
[ 0.313758] ACPI: _SB.PCI0.LPCB.EC0: Boot DSDT EC initialization complete
[ 0.313760] ACPI: _SB.PCI0.LPCB.EC0: EC: Used to handle transactions and events
[ 0.313803] iommu: Default domain type: Translated
[ 0.313803] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.313803] SCSI subsystem initialized
[ 0.313803] libata version 3.00 loaded.
[ 0.313803] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.313803] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.313803] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.313803] vgaarb: loaded
[ 0.313803] ACPI: bus type USB registered
[ 0.313803] usbcore: registered new interface driver usbfs
[ 0.313803] usbcore: registered new interface driver hub
[ 0.313803] usbcore: registered new device driver usb
[ 0.313803] pps_core: LinuxPPS API ver. 1 registered
[ 0.313803] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.313803] PTP clock support registered
[ 0.313803] EDAC MC: Ver: 3.0.0
[ 0.313803] Registered efivars operations
[ 0.313803] NetLabel: Initializing
[ 0.313803] NetLabel: domain hash size = 128
[ 0.313803] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.313803] NetLabel: unlabeled traffic allowed by default
[ 0.313803] PCI: Using ACPI for IRQ routing
[ 0.322013] PCI: pci_cache_line_size set to 64 bytes
[ 0.322055] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.322056] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.322057] e820: reserve RAM buffer [mem 0xb35e9018-0xb3ffffff]
[ 0.322058] e820: reserve RAM buffer [mem 0xb35fa018-0xb3ffffff]
[ 0.322059] e820: reserve RAM buffer [mem 0xb8281000-0xbbffffff]
[ 0.322060] e820: reserve RAM buffer [mem 0xb8659000-0xbbffffff]
[ 0.322060] e820: reserve RAM buffer [mem 0xc24f2000-0xc3ffffff]
[ 0.322061] e820: reserve RAM buffer [mem 0xc3920000-0xc3ffffff]
[ 0.322062] e820: reserve RAM buffer [mem 0xc5317000-0xc7ffffff]
[ 0.322063] e820: reserve RAM buffer [mem 0xc6c1e000-0xc7ffffff]
[ 0.322064] e820: reserve RAM buffer [mem 0xc7b00000-0xc7ffffff]
[ 0.322065] e820: reserve RAM buffer [mem 0x837000000-0x837ffffff]
[ 0.322068] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.322068] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.324918] clocksource: Switched to clocksource tsc-early
[ 0.332416] VFS: Disk quotas dquot_6.6.0
[ 0.332428] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.332509] AppArmor: AppArmor Filesystem Enabled
[ 0.332535] pnp: PnP ACPI init
[ 0.332769] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.333072] pnp 00:01: [dma 0 disabled]
[ 0.333308] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.333310] system 00:02: [io 0xffff] has been reserved
[ 0.333311] system 00:02: [io 0xffff] has been reserved
[ 0.333312] system 00:02: [io 0xffff] has been reserved
[ 0.333314] system 00:02: [io 0x1800-0x18fe] has been reserved
[ 0.333315] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.333389] system 00:03: [io 0x0800-0x087f] has been reserved
[ 0.333435] system 00:05: [io 0x1854-0x1857] has been reserved
[ 0.333663] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.333665] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.333666] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.333667] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.333669] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.333670] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.333671] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.333673] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.333674] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.333676] system 00:06: [mem 0xf7fc0000-0xf7fdffff] has been reserved
[ 0.333712] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.333713] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.333715] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.333716] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.333717] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.333719] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.333720] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.333722] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.333723] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.333724] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.333982] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 0.335095] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.335097] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.335098] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.335927] pnp: PnP ACPI: found 10 devices
[ 0.341436] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.341481] NET: Registered PF_INET protocol family
[ 0.341576] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.342801] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.342830] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.342918] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.343094] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.343146] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.343219] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[ 0.343317] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.343370] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.343428] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.343432] NET: Registered PF_XDP protocol family
[ 0.343438] pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.343440] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 0.343442] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[ 0.343448] clipped [mem size 0x00020000] to [mem size 0xfffffffffffc0000] for e820 entry [mem 0x0009f000-0x000fffff]
[ 0.343450] pci 0000:00:1d.0: BAR 14: assigned [mem 0xc8000000-0xc81fffff]
[ 0.343452] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009f000-0x000fffff]
[ 0.343456] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009f000-0x000fffff]
[ 0.343458] pci 0000:00:1d.0: BAR 15: assigned [mem 0xc8200000-0xc83fffff 64bit pref]
[ 0.343460] pci 0000:00:1d.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.343463] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.343465] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.343470] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.343473] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.343480] pci 0000:00:1b.0: PCI bridge to [bus 02]
[ 0.343497] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.343502] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.343512] pci 0000:00:1d.0: PCI bridge to [bus 04]
[ 0.343515] pci 0000:00:1d.0: bridge window [io 0x2000-0x2fff]
[ 0.343521] pci 0000:00:1d.0: bridge window [mem 0xc8000000-0xc81fffff]
[ 0.343525] pci 0000:00:1d.0: bridge window [mem 0xc8200000-0xc83fffff 64bit pref]
[ 0.343533] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.343534] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.343535] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.343537] pci_bus 0000:00: resource 7 [mem 0xc8000000-0xf7ffffff window]
[ 0.343538] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.343539] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.343540] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.343541] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.343543] pci_bus 0000:03: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.343544] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.343545] pci_bus 0000:04: resource 1 [mem 0xc8000000-0xc81fffff]
[ 0.343546] pci_bus 0000:04: resource 2 [mem 0xc8200000-0xc83fffff 64bit pref]
[ 0.344366] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.344538] PCI: CLS 64 bytes, default 64
[ 0.344542] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.344543] software IO TLB: mapped [mem 0x00000000af5e9000-0x00000000b35e9000] (64MB)
[ 0.344576] Trying to unpack rootfs image as initramfs…
[ 0.353933] Initialise system trusted keyrings
[ 0.353940] Key type blacklist registered
[ 0.353967] workingset: timestamp_bits=36 max_order=23 bucket_order=0
[ 0.355002] zbud: loaded
[ 0.355196] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.355304] fuse: init (API version 7.34)
[ 0.355414] integrity: Platform Keyring initialized
[ 0.360959] Key type asymmetric registered
[ 0.360962] Asymmetric key parser ‘x509’ registered
[ 0.360981] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.361007] io scheduler mq-deadline registered
[ 0.361662] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.362942] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.362959] ACPI: button: Sleep Button [SLPB]
[ 0.362981] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.362991] ACPI: button: Power Button [PWRB]
[ 0.363014] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.363034] ACPI: button: Power Button [PWRF]
[ 0.363739] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.363741] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[ 0.363891] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.363892] ACPI: thermal: Thermal Zone [TZ01] (30 C)
[ 0.364080] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.384878] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.387581] Linux agpgart interface v0.103
[ 0.389911] loop: module loaded
[ 0.390098] tun: Universal TUN/TAP device driver, 1.6
[ 0.390115] PPP generic driver version 2.4.2
[ 0.390147] VFIO - User Level meta-driver version: 0.3
[ 0.390209] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 0.390211] ehci-pci: EHCI PCI platform driver
[ 0.390217] ehci-platform: EHCI generic platform driver
[ 0.390223] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 0.390225] ohci-pci: OHCI PCI platform driver
[ 0.390230] ohci-platform: OHCI generic platform driver
[ 0.390234] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.390275] i8042: PNP: No PS/2 controller found.
[ 0.390276] i8042: Probing ports directly.
[ 0.393374] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.393378] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.393509] mousedev: PS/2 mouse device common for all mice
[ 0.393719] rtc_cmos 00:04: RTC can wake from S4
[ 0.394353] rtc_cmos 00:04: registered as rtc0
[ 0.394478] rtc_cmos 00:04: setting system clock to 2023-09-05T08:01:37 UTC (1693900897)
[ 0.394499] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram
[ 0.394506] i2c_dev: i2c /dev entries driver
[ 0.394705] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 0.394726] device-mapper: uevent: version 1.0.3
[ 0.394782] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 0.394799] platform eisa.0: Probing EISA bus 0
[ 0.394800] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.394802] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.394803] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.394804] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.394805] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.394806] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.394807] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.394808] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.394809] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.394810] platform eisa.0: EISA: Detected 0 cards
[ 0.394813] intel_pstate: Intel P-state driver initializing
[ 0.395059] intel_pstate: HWP enabled
[ 0.395099] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.395116] efifb: probing for efifb
[ 0.395132] efifb: showing boot graphics
[ 0.395811] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[ 0.395812] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.395814] efifb: scrolling: redraw
[ 0.395814] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.395877] Console: switching to colour frame buffer device 128x48
[ 0.396935] fb0: EFI VGA frame buffer device
[ 0.396940] EFI Variables Facility v0.08 2004-May-17
[ 0.434311] resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:07 [mem 0xfdb00000-0xfdffffff]
[ 0.434314] caller pmc_core_probe+0xb9/0x710 mapping multiple BARs
[ 0.434329] intel_pmc_core INT33A1:00: initialized
[ 0.434408] drop_monitor: Initializing network drop monitor service
[ 0.434534] NET: Registered PF_INET6 protocol family
[ 0.487212] Freeing initrd memory: 72208K
[ 0.493023] Segment Routing with IPv6
[ 0.493036] In-situ OAM (IOAM) with IPv6
[ 0.493057] NET: Registered PF_PACKET protocol family
[ 0.493098] Key type dns_resolver registered
[ 0.493666] microcode: sig=0x506e3, pf=0x2, revision=0xf0
[ 0.493830] microcode: Microcode Update Driver: v2.2.
[ 0.493834] IPI shorthand broadcast: enabled
[ 0.493845] sched_clock: Marking stable (493219735, 353221)->(503683481, -10110525)
[ 0.494076] registered taskstats version 1
[ 0.494460] Loading compiled-in X.509 certificates
[ 0.495013] Loaded X.509 cert ‘Build time autogenerated kernel key: 02f77ae704850addeb4fbc0e253011ad227b2815’
[ 0.495398] Loaded X.509 cert ‘Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969’
[ 0.495778] Loaded X.509 cert ‘Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19’
[ 0.495779] blacklist: Loading compiled-in revocation X.509 certificates
[ 0.495791] Loaded X.509 cert ‘Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0’
[ 0.495802] Loaded X.509 cert ‘Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03’
[ 0.495813] Loaded X.509 cert ‘Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b’
[ 0.495822] Loaded X.509 cert ‘Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8’
[ 0.495835] Loaded X.509 cert ‘Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d’
[ 0.495845] Loaded X.509 cert ‘Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c’
[ 0.495857] Loaded X.509 cert ‘Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af’
[ 0.495868] Loaded X.509 cert ‘Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9’
[ 0.495996] zswap: loaded using pool lzo/zbud
[ 0.496138] Key type .fscrypt registered
[ 0.496139] Key type fscrypt-provisioning registered
[ 0.498983] Key type encrypted registered
[ 0.498986] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.500182] integrity: Loading X.509 certificate: UEFI:db
[ 0.500388] integrity: Loaded X.509 cert ‘ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2’
[ 0.500390] integrity: Loading X.509 certificate: UEFI:db
[ 0.500514] integrity: Loaded X.509 cert ‘ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071’
[ 0.500515] integrity: Loading X.509 certificate: UEFI:db
[ 0.500529] integrity: Loaded X.509 cert ‘Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4’
[ 0.500530] integrity: Loading X.509 certificate: UEFI:db
[ 0.500542] integrity: Loaded X.509 cert ‘Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53’
[ 0.500543] integrity: Loading X.509 certificate: UEFI:db
[ 0.500669] integrity: Loaded X.509 cert ‘Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63’
[ 0.501543] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
[ 0.501676] integrity: Loaded X.509 cert ‘Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63’
[ 0.501677] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
[ 0.501803] integrity: Loaded X.509 cert ‘ivan Secure Boot Module Signature key: 0cfcf613dd99841f6c98dd55a23985b928586037’
[ 0.501805] ima: No TPM chip found, activating TPM-bypass!
[ 0.501807] Loading compiled-in module X.509 certificates
[ 0.502192] Loaded X.509 cert ‘Build time autogenerated kernel key: 02f77ae704850addeb4fbc0e253011ad227b2815’
[ 0.502194] ima: Allocated hash algorithm: sha1
[ 0.502198] ima: No architecture policies found
[ 0.502204] evm: Initialising EVM extended attributes:
[ 0.502205] evm: security.selinux
[ 0.502206] evm: security.SMACK64
[ 0.502206] evm: security.SMACK64EXEC
[ 0.502207] evm: security.SMACK64TRANSMUTE
[ 0.502208] evm: security.SMACK64MMAP
[ 0.502208] evm: security.apparmor
[ 0.502209] evm: security.ima
[ 0.502209] evm: security.capability
[ 0.502210] evm: HMAC attrs: 0x1
[ 0.502387] PM: Magic number: 7:202:17
[ 0.502587] RAS: Correctable Errors collector initialized.
[ 0.502591] Lockdown: swapper/0: hibernation is restricted; see man kernel_lockdown.7
[ 0.503453] Freeing unused decrypted memory: 2036K
[ 0.503841] Freeing unused kernel image (initmem) memory: 3352K
[ 0.532493] Write protecting the kernel read-only data: 30720k
[ 0.533004] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 0.533281] Freeing unused kernel image (rodata/data gap) memory: 1448K
[ 0.580838] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.580840] x86/mm: Checking user space page tables
[ 0.619240] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.619243] Run /init as init process
[ 0.619244] with arguments:
[ 0.619245] /init
[ 0.619246] splash
[ 0.619247] with environment:
[ 0.619248] HOME=/
[ 0.619248] TERM=linux
[ 0.619249] BOOT_IMAGE=/boot/vmlinuz-5.15.0-83-generic
[ 0.740576] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.740790] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.741847] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
[ 0.744216] ahci 0000:00:17.0: version 3.0
[ 0.746030] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.746034] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.746036] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.746060] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 0.746062] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.746064] usb usb1: Product: xHCI Host Controller
[ 0.746065] usb usb1: Manufacturer: Linux 5.15.0-83-generic xhci-hcd
[ 0.746066] usb usb1: SerialNumber: 0000:00:14.0
[ 0.756216] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 0.756220] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 0.757291] e1000e: Intel(R) PRO/1000 Network Driver
[ 0.757293] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.758146] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.758750] hub 1-0:1.0: USB hub found
[ 0.758771] hub 1-0:1.0: 16 ports detected
[ 0.759901] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 0.759934] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 0.770873] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 0.770878] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.770880] usb usb2: Product: xHCI Host Controller
[ 0.770882] usb usb2: Manufacturer: Linux 5.15.0-83-generic xhci-hcd
[ 0.770884] usb usb2: SerialNumber: 0000:00:14.0
[ 0.770946] i2c i2c-0: 4/4 memory slots populated (from DMI)
[ 0.771105] hub 2-0:1.0: USB hub found
[ 0.771120] hub 2-0:1.0: 10 ports detected
[ 0.771284] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 0.771456] usb: port power management may be unreliable
[ 0.771608] i2c i2c-0: Successfully instantiated SPD at 0x51
[ 0.771941] i2c i2c-0: Successfully instantiated SPD at 0x52
[ 0.772263] i2c i2c-0: Successfully instantiated SPD at 0x53
[ 0.773753] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.773762] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 0.821042] scsi host0: ahci
[ 0.821269] scsi host1: ahci
[ 0.821426] scsi host2: ahci
[ 0.821542] scsi host3: ahci
[ 0.821635] scsi host4: ahci
[ 0.821723] scsi host5: ahci
[ 0.821753] ata1: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b100 irq 125
[ 0.821755] ata2: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b180 irq 125
[ 0.821756] ata3: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b200 irq 125
[ 0.821757] ata4: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b280 irq 125
[ 0.821759] ata5: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b300 irq 125
[ 0.821762] ata6: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b380 irq 125
[ 0.832627] xhci_hcd 0000:03:00.0: hcc params 0x0200eec0 hci version 0x110 quirks 0x0000000000800010
[ 0.832859] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.832862] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[ 0.832864] xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.832903] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 0.832905] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.832906] usb usb3: Product: xHCI Host Controller
[ 0.832907] usb usb3: Manufacturer: Linux 5.15.0-83-generic xhci-hcd
[ 0.832909] usb usb3: SerialNumber: 0000:03:00.0
[ 0.833008] hub 3-0:1.0: USB hub found
[ 0.833014] hub 3-0:1.0: 2 ports detected
[ 0.833081] usb usb4: We don’t know the algorithms for LPM for this host, disabling LPM.
[ 0.833096] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 0.833097] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.833099] usb usb4: Product: xHCI Host Controller
[ 0.833100] usb usb4: Manufacturer: Linux 5.15.0-83-generic xhci-hcd
[ 0.833101] usb usb4: SerialNumber: 0000:03:00.0
[ 0.833170] hub 4-0:1.0: USB hub found
[ 0.833176] hub 4-0:1.0: 2 ports detected
[ 1.012570] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 1.080129] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) d0:17:c2:cf:f8:2b
[ 1.080144] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 1.080241] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ 1.108427] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[ 1.135541] ata2: SATA link down (SStatus 4 SControl 300)
[ 1.135800] ata5: SATA link down (SStatus 4 SControl 300)
[ 1.135832] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.135913] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.135944] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.135974] ata3: SATA link down (SStatus 4 SControl 300)
[ 1.137025] ata6.00: ATA-8: Hitachi HDT721064SLA380, STDOA3AA, max UDMA/133
[ 1.137504] ata1.00: supports DRM functions and may not be fully accessible
[ 1.137511] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT01B6Q, max UDMA/133
[ 1.138041] ata1.00: NCQ Send/Recv Log not supported
[ 1.138049] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.139476] ata1.00: Features: Trust Dev-Sleep
[ 1.139790] ata4.00: supports DRM functions and may not be fully accessible
[ 1.139797] ata4.00: ATA-11: Samsung SSD 870 EVO 500GB, SVT01B6Q, max UDMA/133
[ 1.139902] ata1.00: supports DRM functions and may not be fully accessible
[ 1.140307] ata4.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.140397] ata1.00: NCQ Send/Recv Log not supported
[ 1.142109] ata1.00: configured for UDMA/133
[ 1.142486] ata4.00: Features: Trust Dev-Sleep NCQ-sndrcv
[ 1.142512] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
[ 1.142852] ata4.00: supports DRM functions and may not be fully accessible
[ 1.143386] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.143813] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.143874] sd 0:0:0:0: [sda] Write Protect is off
[ 1.143882] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.143940] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 1.145543] ata4.00: configured for UDMA/133
[ 1.145722] scsi 3:0:0:0: Direct-Access ATA Samsung SSD 870 1B6Q PQ: 0 ANSI: 5
[ 1.146249] ata4.00: Enabling discard_zeroes_data
[ 1.146268] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 1.146616] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.146662] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.146675] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.146763] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 1.147718] ata4.00: Enabling discard_zeroes_data
[ 1.148467] sdb: sdb1 sdb2 < sdb5 >
[ 1.148992] sda: sda1 sda2 sda3 sda4 sda5 sda6
[ 1.149237] ata4.00: Enabling discard_zeroes_data
[ 1.150567] sd 0:0:0:0: [sda] supports TCG Opal
[ 1.150577] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.150678] sd 3:0:0:0: [sdb] supports TCG Opal
[ 1.150687] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.152039] ata6.00: ATA Identify Device Log not supported
[ 1.152045] ata6.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.177128] ata6.00: ATA Identify Device Log not supported
[ 1.177143] ata6.00: configured for UDMA/133
[ 1.177407] scsi 5:0:0:0: Direct-Access ATA Hitachi HDT72106 A3AA PQ: 0 ANSI: 5
[ 1.177892] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 1.178270] sd 5:0:0:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 1.178333] sd 5:0:0:0: [sdc] Write Protect is off
[ 1.178362] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.178525] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 1.234890] sdc: sdc1 sdc2 sdc3 sdc4
[ 1.236046] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 1.242401] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[ 1.243210] asus_wmi: ASUS WMI generic driver loaded
[ 1.257554] usb 1-4: New USB device found, idVendor=09da, idProduct=3878, bcdDevice=99.02
[ 1.257559] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.257561] usb 1-4: Product: USB Device
[ 1.257563] usb 1-4: Manufacturer: COMPANY
[ 1.380434] tsc: Refined TSC clocksource calibration: 4007.999 MHz
[ 1.380453] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39c5e149d3a, max_idle_ns: 440795336434 ns
[ 1.380539] clocksource: Switched to clocksource tsc
[ 1.384438] usb 1-6: new low-speed USB device number 3 using xhci_hcd
[ 1.537697] usb 1-6: New USB device found, idVendor=1a2c, idProduct=2c27, bcdDevice= 1.10
[ 1.537710] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.537718] usb 1-6: Product: USB Keyboard
[ 1.537724] usb 1-6: Manufacturer: USB
[ 1.556816] hid: raw HID events driver (C) Jiri Kosina
[ 1.563525] usbcore: registered new interface driver usbhid
[ 1.563549] usbhid: USB HID core driver
[ 1.573982] input: COMPANY USB Device as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:09DA:3878.0001/input/input6
[ 1.632964] hid-generic 0003:09DA:3878.0001: input,hidraw0: USB HID v1.11 Keyboard [COMPANY USB Device] on usb-0000:00:14.0-4/input0
[ 1.633465] input: COMPANY USB Device as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:09DA:3878.0002/input/input7
[ 1.634065] hid-generic 0003:09DA:3878.0002: input,hidraw1: USB HID v1.11 Mouse [COMPANY USB Device] on usb-0000:00:14.0-4/input1
[ 1.634911] input: COMPANY USB Device Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:09DA:3878.0003/input/input8
[ 1.692795] input: COMPANY USB Device as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:09DA:3878.0003/input/input9
[ 1.693405] hid-generic 0003:09DA:3878.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [COMPANY USB Device] on usb-0000:00:14.0-4/input2
[ 1.694156] input: USB USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:1A2C:2C27.0004/input/input10
[ 1.752860] hid-generic 0003:1A2C:2C27.0004: input,hidraw3: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-0000:00:14.0-6/input0
[ 1.753583] input: USB USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:1A2C:2C27.0005/input/input11
[ 1.812827] input: USB USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:1A2C:2C27.0005/input/input12
[ 1.813257] hid-generic 0003:1A2C:2C27.0005: input,hidraw4: USB HID v1.10 Device [USB USB Keyboard] on usb-0000:00:14.0-6/input1
[ 2.476196] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 2.585401] systemd[1]: Inserted module ‘autofs4’
[ 2.693365] systemd[1]: systemd 245.4-4ubuntu3.20 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 2.712621] systemd[1]: Detected architecture x86-64.
[ 2.765877] systemd[1]: Set hostname to .
[ 2.767855] systemd[1]: Initializing machine ID from random generator.
[ 2.767957] systemd[1]: Installed transient /etc/machine-id file.
[ 2.768962] Lockdown: systemd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7
[ 2.920906] systemd[1]: Created slice system-modprobe.slice.
[ 2.921090] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.921254] systemd[1]: Created slice User and Session Slice.
[ 2.921309] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.921448] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.921479] systemd[1]: Reached target User and Group Name Lookups.
[ 2.921493] systemd[1]: Reached target Remote File Systems.
[ 2.921502] systemd[1]: Reached target Slices.
[ 2.921511] systemd[1]: Reached target Mounting snaps.
[ 2.921595] systemd[1]: Listening on Syslog Socket.
[ 2.921668] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 2.921709] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 2.921868] systemd[1]: Listening on Journal Audit Socket.
[ 2.921941] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.922029] systemd[1]: Listening on Journal Socket.
[ 2.922109] systemd[1]: Listening on udev Control Socket.
[ 2.922171] systemd[1]: Listening on udev Kernel Socket.
[ 2.922858] systemd[1]: Mounting Huge Pages File System…
[ 2.923538] systemd[1]: Mounting POSIX Message Queue File System…
[ 2.924316] systemd[1]: Mounting Kernel Debug File System…
[ 2.925024] systemd[1]: Mounting Kernel Trace File System…
[ 2.926018] systemd[1]: Starting Journal Service…
[ 2.926736] systemd[1]: Starting Set the console keyboard layout…
[ 2.927572] systemd[1]: Starting Create list of static device nodes for the current kernel…
[ 2.928389] systemd[1]: Starting Load Kernel Module chromeos_pstore…
[ 2.929433] systemd[1]: Starting Load Kernel Module drm…
[ 2.930449] systemd[1]: Starting Load Kernel Module efi_pstore…
[ 2.931352] systemd[1]: Starting Load Kernel Module pstore_blk…
[ 2.932228] systemd[1]: Starting Load Kernel Module pstore_zone…
[ 2.933304] systemd[1]: Starting Load Kernel Module ramoops…
[ 2.935543] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 2.935578] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 2.937126] systemd[1]: Starting Load Kernel Modules…
[ 2.939274] systemd[1]: Starting Remount Root and Kernel File Systems…
[ 2.940527] systemd[1]: Starting udev Coldplug all Devices…
[ 2.941649] systemd[1]: Starting Uncomplicated firewall…
[ 2.943573] systemd[1]: Mounted Huge Pages File System.
[ 2.943706] systemd[1]: Mounted POSIX Message Queue File System.
[ 2.944107] systemd[1]: Mounted Kernel Debug File System.
[ 2.944838] systemd[1]: Mounted Kernel Trace File System.
[ 2.947886] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 2.950134] systemd[1]: modprobe@pstore_blk.service: Succeeded.
[ 2.951042] systemd[1]: Finished Load Kernel Module pstore_blk.
[ 2.951321] systemd[1]: modprobe@pstore_zone.service: Succeeded.
[ 2.951943] systemd[1]: Finished Load Kernel Module pstore_zone.
[ 2.953854] systemd[1]: modprobe@ramoops.service: Succeeded.
[ 2.955037] systemd[1]: Finished Load Kernel Module ramoops.
[ 2.955632] systemd[1]: Finished Uncomplicated firewall.
[ 2.956090] systemd[1]: modprobe@drm.service: Succeeded.
[ 2.956329] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[ 2.956384] systemd[1]: Finished Load Kernel Module drm.
[ 2.965591] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 2.971314] systemd[1]: Activating swap /swapfile…
[ 2.972605] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 2.979888] systemd[1]: Starting Load/Save Random Seed…
[ 2.985972] pstore: Using crash dump compression: deflate
[ 2.985980] pstore: Registered efi as persistent store backend
[ 2.986172] systemd[1]: Starting Create System Users…
[ 2.987007] lp: driver loaded but no devices found
[ 2.987378] Adding 2097148k swap on /swapfile. Priority:-2 extents:16 across:235012096k SSFS
[ 2.987446] systemd[1]: Activated swap /swapfile.
[ 2.987512] systemd[1]: Reached target Swap.
[ 2.996141] systemd[1]: Finished Load/Save Random Seed.
[ 3.008868] systemd[1]: modprobe@chromeos_pstore.service: Succeeded.
[ 3.009325] systemd[1]: Finished Load Kernel Module chromeos_pstore.
[ 3.009722] systemd[1]: modprobe@efi_pstore.service: Succeeded.
[ 3.010179] systemd[1]: Finished Load Kernel Module efi_pstore.
[ 3.010336] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 3.011409] ppdev: user-space parallel port driver
[ 3.016030] systemd[1]: Finished Create System Users.
[ 3.017206] systemd[1]: Starting Create Static Device Nodes in /dev…
[ 3.017925] systemd[1]: Finished Load Kernel Modules.
[ 3.019178] systemd[1]: Mounting FUSE Control File System…
[ 3.020421] systemd[1]: Mounting Kernel Configuration File System…
[ 3.022564] systemd[1]: Starting Apply Kernel Variables…
[ 3.024548] systemd[1]: Mounted FUSE Control File System.
[ 3.024697] systemd[1]: Mounted Kernel Configuration File System.
[ 3.026907] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 3.029172] systemd[1]: Starting udev Kernel Device Manager…
[ 3.036466] systemd[1]: Started Journal Service.
[ 3.045651] systemd-journald[311]: Received client request to flush runtime journal.
[ 3.050392] loop0: detected capacity change from 0 to 8
[ 3.088449] loop1: detected capacity change from 0 to 129608
[ 3.088536] loop2: detected capacity change from 0 to 94064
[ 3.088575] loop3: detected capacity change from 0 to 102072
[ 3.128573] loop4: detected capacity change from 0 to 187776
[ 3.152650] loop5: detected capacity change from 0 to 709280
[ 3.288177] mei_me 0000:00:16.0: enabling device (0000 → 0002)
[ 3.317729] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 3.319422] ee1004 0-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 3.320503] ee1004 0-0052: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 3.323421] ee1004 0-0053: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 3.389001] asus_wmi: Initialization: 0x0
[ 3.389031] asus_wmi: BIOS WMI version: 0.9
[ 3.389143] asus_wmi: SFUN value: 0x0
[ 3.389144] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[ 3.393967] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input13
[ 3.458678] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[ 3.458681] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 3.458682] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 3.458683] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 3.458690] MXM: GUID detected in BIOS
[ 3.472943] Console: switching to colour dummy device 80x25
[ 3.474452] cryptd: max_cpu_qlen set to 1000
[ 3.478473] nouveau 0000:01:00.0: vgaarb: deactivate vga console
[ 3.478588] nouveau 0000:01:00.0: NVIDIA GA102 (b72000a1)
[ 3.512557] AVX2 version of gcm_enc/dec engaged.
[ 3.512598] AES CTR mode by8 optimization enabled
[ 3.543668] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 3.543675] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 3.582411] nouveau 0000:01:00.0: bios: version 94.02.42.00.a9
[ 3.591393] nouveau 0000:01:00.0: bios: M0203E type 0a
[ 3.591398] nouveau 0000:01:00.0: fb: 24576 MiB of unknown memory type
[ 3.593852] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
[ 3.594310] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 3.594313] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.594315] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.594317] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 3.594318] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 3.594320] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 3.594322] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 3.594324] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 3.594325] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 3.595595] nouveau 0000:01:00.0: DRM: VRAM: 24576 MiB
[ 3.595598] nouveau 0000:01:00.0: DRM: GART: 536870912 MiB
[ 3.595601] nouveau 0000:01:00.0: DRM: BIT table ‘A’ not found
[ 3.595604] nouveau 0000:01:00.0: DRM: BIT table ‘L’ not found
[ 3.595606] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 3.595608] nouveau 0000:01:00.0: DRM: DCB version 4.1
[ 3.595610] nouveau 0000:01:00.0: DRM: DCB outp 00: 04800f86 04600020
[ 3.595612] nouveau 0000:01:00.0: DRM: DCB outp 01: 04000f82 00020020
[ 3.595620] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011f72 00020010
[ 3.595622] nouveau 0000:01:00.0: DRM: DCB outp 04: 02822f66 04600020
[ 3.595624] nouveau 0000:01:00.0: DRM: DCB outp 05: 02022f62 00020020
[ 3.595627] nouveau 0000:01:00.0: DRM: DCB outp 07: 02033f52 00020010
[ 3.595629] nouveau 0000:01:00.0: DRM: DCB outp 08: 01844f36 04600010
[ 3.595631] nouveau 0000:01:00.0: DRM: DCB outp 09: 01044f32 00020010
[ 3.595634] nouveau 0000:01:00.0: DRM: DCB conn 00: 02000046
[ 3.595635] nouveau 0000:01:00.0: DRM: DCB conn 01: 01000161
[ 3.595637] nouveau 0000:01:00.0: DRM: DCB conn 02: 00020246
[ 3.595639] nouveau 0000:01:00.0: DRM: DCB conn 03: 00010361
[ 3.595641] nouveau 0000:01:00.0: DRM: DCB conn 04: 00001446
[ 3.595983] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 3.695788] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 3.700650] intel_tcc_cooling: Programmable TCC Offset detected
[ 3.733337] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 3.770428] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 3.820477] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 3.882185] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 3.908398] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops nv50_audio_component_bind_ops [nouveau])
[ 3.909526] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x200000, bo 00000000fb1aefdb
[ 3.916419] fbcon: nouveaudrmfb (fb0) is primary device
[ 3.920249] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 3.932632] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 4.120707] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
[ 4.160004] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
[ 4.191573] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23
[ 4.197510] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input24
[ 4.198518] intel_rapl_common: Found RAPL domain package
[ 4.198520] intel_rapl_common: Found RAPL domain core
[ 4.198521] intel_rapl_common: Found RAPL domain dram
[ 4.209888] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input25
[ 4.236569] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input26
[ 4.252924] input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input27
[ 4.282408] Console: switching to colour frame buffer device 240x67
[ 4.596638] nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[ 4.624815] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 4.624820] nouveau 0000:01:00.0: DRM: Disabling PCI power management to avoid bug
[ 5.479027] audit: type=1400 audit(1693900902.578:2): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name=“libreoffice-xpdfimport” pid=809 comm=“apparmor_parser”
[ 5.505120] audit: type=1400 audit(1693900902.606:3): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name=“nvidia_modprobe” pid=813 comm=“apparmor_parser”
[ 5.506215] audit: type=1400 audit(1693900902.606:4): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name=“libreoffice-oopslash” pid=816 comm=“apparmor_parser”
[ 5.506333] audit: type=1400 audit(1693900902.606:5): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name=“nvidia_modprobe//kmod” pid=813 comm=“apparmor_parser”
[ 5.518732] audit: type=1400 audit(1693900902.618:6): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name=“/usr/bin/man” pid=810 comm=“apparmor_parser”
[ 5.519872] audit: type=1400 audit(1693900902.618:7): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name=“man_filter” pid=810 comm=“apparmor_parser”
[ 5.521381] audit: type=1400 audit(1693900902.622:8): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name=“man_groff” pid=810 comm=“apparmor_parser”
[ 5.536616] audit: type=1400 audit(1693900902.638:9): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name=“libreoffice-senddoc” pid=823 comm=“apparmor_parser”
[ 5.546009] audit: type=1400 audit(1693900902.646:10): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name=“/usr/sbin/cups-browsed” pid=817 comm=“apparmor_parser”
[ 5.550173] audit: type=1400 audit(1693900902.650:11): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name=“ippusbxd” pid=825 comm=“apparmor_parser”
[ 10.910868] loop6: detected capacity change from 0 to 8
[ 11.624421] kauditd_printk_skb: 26 callbacks suppressed
[ 11.624424] audit: type=1400 audit(1693900908.726:38): apparmor=“STATUS” operation=“profile_replace” info=“same as current profile, skipping” profile=“unconfined” name=“snap.snap-store.hook.configure” pid=1102 comm=“apparmor_parser”
[ 11.810324] audit: type=1400 audit(1693900908.910:39): apparmor=“STATUS” operation=“profile_replace” info=“same as current profile, skipping” profile=“unconfined” name=“/snap/snapd/18357/usr/lib/snapd/snap-confine” pid=1100 comm=“apparmor_parser”
[ 11.811124] audit: type=1400 audit(1693900908.910:40): apparmor=“STATUS” operation=“profile_replace” info=“same as current profile, skipping” profile=“unconfined” name=“/snap/snapd/18357/usr/lib/snapd/snap-confine//mount-namespace-capture-helper” pid=1100 comm=“apparmor_parser”
[ 11.924019] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 11.924081] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[ 11.971283] audit: type=1400 audit(1693900909.070:41): apparmor=“STATUS” operation=“profile_replace” info=“same as current profile, skipping” profile=“unconfined” name=“/usr/lib/snapd/snap-confine” pid=1106 comm=“apparmor_parser”
[ 11.972260] audit: type=1400 audit(1693900909.070:42): apparmor=“STATUS” operation=“profile_replace” info=“same as current profile, skipping” profile=“unconfined” name=“/usr/lib/snapd/snap-confine//mount-namespace-capture-helper” pid=1106 comm=“apparmor_parser”
[ 12.032027] audit: type=1400 audit(1693900909.130:43): apparmor=“STATUS” operation=“profile_replace” info=“same as current profile, skipping” profile=“unconfined” name=“snap.snap-store.snap-store” pid=1103 comm=“apparmor_parser”
[ 12.166925] audit: type=1400 audit(1693900909.266:44): apparmor=“STATUS” operation=“profile_replace” info=“same as current profile, skipping” profile=“unconfined” name=“snap.snap-store.ubuntu-software” pid=1104 comm=“apparmor_parser”
[ 12.179988] audit: type=1400 audit(1693900909.278:45): apparmor=“STATUS” operation=“profile_replace” info=“same as current profile, skipping” profile=“unconfined” name=“snap.snap-store.ubuntu-software-local-file” pid=1105 comm=“apparmor_parser”
[ 12.363456] audit: type=1400 audit(1693900909.462:46): apparmor=“STATUS” operation=“profile_replace” info=“same as current profile, skipping” profile=“unconfined” name=“snap-update-ns.snap-store” pid=1101 comm=“apparmor_parser”
[ 22.200045] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[ 22.366559] rfkill: input handler disabled
[ 30.086886] rfkill: input handler enabled
[ 32.755256] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[ 33.413379] rfkill: input handler disabled
[ 99.146438] audit: type=1400 audit(1693893796.040:47): apparmor=“DENIED” operation=“capable” profile=“/snap/snapd/18357/usr/lib/snapd/snap-confine” pid=3107 comm=“snap-confine” capability=4 capname=“fsetid”
[ 103.961470] audit: type=1326 audit(1693893800.856:48): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.snap-store.ubuntu-software pid=3107 comm=“snap-store” exe=“/snap/snap-store/638/usr/bin/snap-store” sig=0 arch=c000003e syscall=314 compat=0 ip=0x7f01644ec73d code=0x50000
[ 106.266753] audit: type=1400 audit(1693893803.160:49): apparmor=“DENIED” operation=“open” profile=“snap.snap-store.ubuntu-software” name=“/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop” pid=3107 comm=“snap-store” requested_mask=“r” denied_mask=“r” fsuid=1000 ouid=0
[ 106.302716] audit: type=1400 audit(1693893803.196:50): apparmor=“DENIED” operation=“open” profile=“snap.snap-store.ubuntu-software” name=“/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop” pid=3107 comm=“snap-store” requested_mask=“r” denied_mask=“r” fsuid=1000 ouid=0
[ 106.586394] audit: type=1107 audit(1693893803.480:51): pid=904 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg=‘apparmor=“DENIED” operation=“dbus_method_call” bus=“system” path=“/org/freedesktop/PolicyKit1/Authority” interface=“org.freedesktop.DBus.Properties” member=“GetAll” mask=“send” name=“:1.8” pid=3107 label=“snap.snap-store.ubuntu-software” peer_pid=919 peer_label=“unconfined”
exe=“/usr/bin/dbus-daemon” sauid=103 hostname=? addr=? terminal=?’
[ 106.586719] audit: type=1107 audit(1693893803.480:52): pid=904 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg=‘apparmor=“DENIED” operation=“dbus_method_call” bus=“system” path=“/org/freedesktop/PolicyKit1/Authority” interface=“org.freedesktop.PolicyKit1.Authority” member=“CheckAuthorization” mask=“send” name=“:1.8” pid=3107 label=“snap.snap-store.ubuntu-software” peer_pid=919 peer_label=“unconfined”
exe=“/usr/bin/dbus-daemon” sauid=103 hostname=? addr=? terminal=?’
[ 106.590607] audit: type=1107 audit(1693893803.484:53): pid=904 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg=‘apparmor=“DENIED” operation=“dbus_method_call” bus=“system” path=“/org/freedesktop/PolicyKit1/Authority” interface=“org.freedesktop.DBus.Properties” member=“GetAll” mask=“send” name=“:1.8” pid=3107 label=“snap.snap-store.ubuntu-software” peer_pid=919 peer_label=“unconfined”
exe=“/usr/bin/dbus-daemon” sauid=103 hostname=? addr=? terminal=?’
[ 106.590928] audit: type=1107 audit(1693893803.484:54): pid=904 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg=‘apparmor=“DENIED” operation=“dbus_method_call” bus=“system” path=“/org/freedesktop/PolicyKit1/Authority” interface=“org.freedesktop.PolicyKit1.Authority” member=“CheckAuthorization” mask=“send” name=“:1.8” pid=3107 label=“snap.snap-store.ubuntu-software” peer_pid=919 peer_label=“unconfined”
exe=“/usr/bin/dbus-daemon” sauid=103 hostname=? addr=? terminal=?’
[ 106.941584] audit: type=1400 audit(1693893803.836:55): apparmor=“DENIED” operation=“open” profile=“snap.snap-store.ubuntu-software” name=“/etc/PackageKit/Vendor.conf” pid=3107 comm=“snap-store” requested_mask=“r” denied_mask=“r” fsuid=1000 ouid=0
[ 107.273746] audit: type=1400 audit(1693893804.168:56): apparmor=“DENIED” operation=“open” profile=“snap.snap-store.ubuntu-software” name=“/etc/appstream.conf” pid=3107 comm=“snap-store” requested_mask=“r” denied_mask=“r” fsuid=1000 ouid=0
[ 115.219032] audit: type=1400 audit(1693893812.112:57): apparmor=“DENIED” operation=“open” profile=“snap.snap-store.ubuntu-software” name=“/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop” pid=3107 comm=“pool-org.gnome.” requested_mask=“r” denied_mask=“r” fsuid=1000 ouid=0
[ 115.251290] audit: type=1400 audit(1693893812.144:58): apparmor=“DENIED” operation=“open” profile=“snap.snap-store.ubuntu-software” name=“/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop” pid=3107 comm=“pool-org.gnome.” requested_mask=“r” denied_mask=“r” fsuid=1000 ouid=0
[ 115.529230] audit: type=1326 audit(1693893812.424:59): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.snap-store.ubuntu-software pid=3107 comm=“pool-org.gnome.” exe=“/snap/snap-store/638/usr/bin/snap-store” sig=0 arch=c000003e syscall=93 compat=0 ip=0x7f01644e339b code=0x50000
[ 1184.464816] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 1186.096794] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 2540.358553] RPC: Registered named UNIX socket transport module.
[ 2540.358556] RPC: Registered udp transport module.
[ 2540.358557] RPC: Registered tcp transport module.
[ 2540.358558] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2540.381417] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 2542.644624] NFSD: Using UMH upcall client tracking operations.
[ 2542.644628] NFSD: starting 90-second grace period (net f0000000)
Hi,
You don’t need to directly copy the whole log to me.
Just filter the dmesg log by yourself before and after you connect the cable.
For example, if the timestamp in the last line is always same, it meaans no new log is printed.
[ 6047.916289] usb 1-5: new full-speed USB device number 4 using xhci_hcd
[ 6048.070515] usb 1-5: New USB device found, idVendor=0955, idProduct=7045, bcdDevice= 0.01
[ 6048.070531] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6048.070539] usb 1-5: Product: Tegra On-Platform Operator
[ 6048.070544] usb 1-5: Manufacturer: NVIDIA
[ 6048.070550] usb 1-5: SerialNumber: TOPOB0F8988D
[ 6048.076682] hid-generic 0003:0955:7045.0006: hiddev1,hidraw5: USB HID v1.10 Device [NVIDIA Tegra On-Platform Operator] on usb-0000:00:14.0-5/input0
[ 6048.140472] cdc_acm 1-5:1.1: ttyACM0: USB ACM device
[ 6048.140862] cdc_acm 1-5:1.3: ttyACM1: USB ACM device
[ 6048.141117] cdc_acm 1-5:1.5: ttyACM2: USB ACM device
[ 6048.141415] cdc_acm 1-5:1.7: ttyACM3: USB ACM device
[ 6048.141456] usbcore: registered new interface driver cdc_acm
[ 6048.141458] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Could you take a picture of your exact usb connection on jeston?
Just to clarify.
I need the result on type C port. But not micro usb port. ttyACM0~3 is from micro usb port.
Do you have other Orin AGX that can do the cross check?
For example, check the cable, check the method to enter recovery mode with that OK Orin board.
No,I have paid for one more on Friday on Arrow but it hasn’t been shipped yet so I won’t receive it for at least 7 days.
what else should I try with the current Jetson Agx Orin? Waiting cables from the second one is too long as it can be on custom for long time
I would like to double confirm the UART log.
Please try to use picocom (sudo apt-get install picocom) on your host instead of minicom.
sudo picocom -b 115200 /dev/ttyACM0
And reboot your host to see what got printed.
elektrorazvoj@elektrorazvoj-System-Product-Name:~$ sudo picocom -b 115200 /dev/ttyACM0
[sudo] password for elektrorazvoj:
picocom v3.1
port is : /dev/ttyACM0
flowcontrol : none
baudrate is : 115200
parity is : none
databits are : 8
stopbits are : 1
escape is : C-a
local echo is : no
noinit is : no
noreset is : no
hangup is : no
nolock is : no
send_cmd is : sz -vv
receive_cmd is : rz -vv -E
imap is :
omap is :
emap is : crcrlf,delbs,
logfile is : none
initstring : none
exit_after is : not set
exit is : no
Type [C-a] [C-h] to see available commands
Terminal ready
Have you rebooted the board after you enable the picocom?
Just a reminder that this needs to use the micro port on the right hand side in this pic but not type C.
I am using micro port now, not type C.
should I reboot the board on host pc or jetson? if you mean on board from jetson, reset button doesn’t work and if I do force power of from left power button, jetson won’t power on until I plug off the power.
Hi,
I mean you need to reset your jetson. /dev/ttyACM0 is a node to capture the log from jetson.
You should press the hold the power button for a while and see if that powers on the board.
Basically, how you power on the board does not matter to me. I just want to check the boot up log from ttyACM0. Reset button or power button or even plug out the cable and plug in again are all okay to me.
Hi,
When I am connected to micro usb port , pressing the power button doesn’t change anything. The board doesn’t switch on.
Are you talking about the power LED does not even light up or you are talking about the LED is light up but no log from console?
First one, the Led is not light up when the micro usb is connected and I am pressing the power button.
