Jetson AGX Xavier autoboot when powered

Autonomous Machines Jetson & Embedded Systems Jetson AGX Xavier
1

Good morning,

I’d like to know if there is a way to get the AGX Xavier to start running whatever application has been flashed on it as soon as power is being supplied to it – currently there is a need to press the power button which won’t work for my deployed solution (i.e. there might be power cuts and therefore would need the Jetson to restart as soon as the power comes back up.)

Many thanks!

3

Hi,

Auto power-on requires a harware design/re-work on your carrier board.

We put this info on Xavier produce design guide.

4

there is J508; 8 pin header.
in case pins 5&6 are conencted agx devkit will autostart on power on after interruption etc.