On the Jetson Xavier AGX, the system boots and the HDMI display works when using either the eMMC or the SD card by setting the primary and secondary boot options in the /boot/extlinux.conf file (located on the SD card). However, when I remove the SD card and attempt to boot directly from eMMC, the HDMI display does not work and shows an above shared error in dmesg. I have shared the /var/log/Xorg.0.log when I remove SD card and try to boot directly from eMMC. Xorg.0.log (8.3 KB)
Related topics
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
| HDMI not working | 14 | 106 | December 24, 2024 | |
| Display fails - HDMI output not working | 5 | 2086 | October 18, 2021 | |
| AGX Xavier HDMI working abnormally: dc_poll_register 0x41: timeout | 3 | 66 | October 30, 2024 | |
| Xavier模组安装到自己制作的载板上，hdmi无显示问题，请教一下如何解决？ | 4 | 1294 | October 18, 2021 | |
| No video from X11 on HDMI on custom carrier | 42 | 2825 | February 26, 2022 | |
| HDMI not output not working on Xavier | 11 | 1523 | October 18, 2021 | |
| HDMI displays work only when plugged after boot | 0 | 969 | June 4, 2020 | |
| No output to Monitor via HDMI | 3 | 949 | February 28, 2022 | |
| Jetson TX2 problem with HDMI DISPLAY | 8 | 3774 | October 18, 2021 | |
| AGX Xavier HDMI use HDMI0 & can not connect | 22 | 1866 | April 20, 2022 |