Hello there! Faced problems when working with CAN BUS. There is TX2 to which the CAN Tranciever is connected (120 ohm available). There is a receiving device (not TX2). At the moment when I turn on TX2, “Error frames” appear in large numbers on the receiving side, the same situation when rebooting …

CAN driver means loading mttcan using modprobe mttcan. When Jetson reboots, you have to load driver again. The end device is continously sending frames when jetson reboots? When you see “frame errors” on the other device, please give me below details from Jetson: $lsmod $ip -d -s link show can0

Jetson many CAN bus errors

Robotics & Edge Computing Jetson & Embedded Systems Jetson TX2

silaj30653 June 15, 2021, 2:18pm 19

Hello! No, problem is not solved…

Weird CAN BUS behaviour when booting

Topic		Replies	Views
Jetson tx2 CAN communication Problem Jetson TX2 can-bus	8	720	October 18, 2021
nvidia tx2 mtt_can controller problem Jetson TX2	3	709	January 16, 2018
TX2 CAN TX/RX issues on L4T 28.1 Jetson TX2	8	2002	September 18, 2019
CAN bus has error after connecting Jetson Jetson TX2	19	7509	October 18, 2021
TX2 CAN bus can't work Jetson TX2	4	3945	October 18, 2021
Jetson TX2 CAN bus send problem Jetson TX2 can-bus	20	3435	October 18, 2021
All of received CAN messages are errors Jetson TX2	11	3426	October 18, 2021
TX2 CAN Error - Entered bus off state Jetson TX2	7	4838	October 18, 2021
CAN BUS on Jetson TX2 not working Jetson TX2	11	4041	November 18, 2019
AGX Xavier - CANBus can not work Jetson AGX Xavier can-bus	15	1743	August 17, 2022

Jetson many CAN bus errors

Related topics