# Jetson Nano Carrier board and USB **URL:** \ **Category:** Jetson Nano\ **Tags:** board-design, usb\ **Created:** [May 14, 2021, 9:01am UTC](https://forums.developer.nvidia.com/t/jetson-nano-carrier-board-and-usb/177934 "2021-05-14T09:01:04Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![wri](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@wri](https://forums.developer.nvidia.com/u/wri)\ **Post date:** [May 14, 2021, 9:01am UTC](https://forums.developer.nvidia.com/t/jetson-nano-carrier-board-and-usb/177934/1 "2021-05-14T09:01:04Z")
Hi all, we started into a development of a camera solution using Jetson Nano. We plan to develop our own carrier board and to use Nano Production Module. I use the B01 schematics as starting point for the board design but I have to replace the RTS5411 USB Hub because it is not available on the market. To make things more easy, I would like to use a simple USB2 chip (TI TUSB2036), connecting USB1 AP\_P and AP\_N and leave the “USBSS” pins of the module unconnected. Also, I will not use I2C for configuration. Will this work? Will changes to DTB or USB driver be required? Any advice is appreciated. Thank you. ---
**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\ **Post date:** [May 17, 2021, 2:31am UTC](https://forums.developer.nvidia.com/t/jetson-nano-carrier-board-and-usb/177934/3 "2021-05-17T02:31:45Z")
Please refer to the adaptation guide in the developer guide. There is tutorial for how to modify dtb for usb. ---
**Author:** ![nadeemm](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/nadeemm/32/367020_2.png) [@nadeemm](https://forums.developer.nvidia.com/u/nadeemm)\ **Post date:** [October 15, 2021, 3:37am UTC](https://forums.developer.nvidia.com/t/jetson-nano-carrier-board-and-usb/177934/5 "2021-10-15T03:37:13Z")
Closed on October 15, 2021, 3:37am UTC