Jetson Nano Failures when flashing

Autonomous Machines Jetson & Embedded Systems Jetson Nano
1

Hey guys,

I’m using Jetpack 4.4.1 and trying to flash my Jetson Nano eMMC version
I got the following messages.

[0295.107] Enabled early print
[0295.110] [L4T TegraBoot] (version 00.00.2018.01-l4t-7dfcb60a)
[0295.115] Processing in recovery mode
[0295.118] A02 Bootrom Patch rev = 1023
[0295.122] Power-up reason: pmc por
[0295.125] Established communication link with host
[0296.134] NvTbootI2cWrite(): error code 0x00045100 Error while starting write transaction
[0296.142] NvTbootI2cDeviceRead(): error code 0x00045001 Error while sending the offset to slave
[0296.151] NvTbootI2c: Read failed for slave 0xac, offset 0x00 with error code 0x00045001

Any idea ?
Any help would be much appreciated.

Thanks,
Ilies

3

hello ilies.chergui,

are you running with SDKManager or using the flash script to re-flash the board?

4

Hey @JerryChang

I’m running with the SDKManager (using Jetpack 4.4.1).

5

hello ilies.chergui,

assume that the JetPack release image already install to your local host machine,
could you please have a try to perform flash.sh for flashing the Nano platform. thanks

https://docs.nvidia.com/jetson/archives/l4t-archived/l4t-325/index.html#page/Tegra%20Linux%20Driver%20Package%20Development%20Guide/flashing.html#wwpID0E04N0HA