# Jetson Nano First Boot power issues

**URL:** <https://forums.developer.nvidia.com/t/jetson-nano-first-boot-power-issues/226672>\
**Category:** Jetson Nano\
**Tags:** power\
**Created:** [August 31, 2022, 7:21pm UTC](https://forums.developer.nvidia.com/t/jetson-nano-first-boot-power-issues/226672 "2022-08-31T19:21:33Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![slow\_one](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@slow\_one](https://forums.developer.nvidia.com/u/slow_one)\
**Post date:** [August 31, 2022, 7:21pm UTC](https://forums.developer.nvidia.com/t/jetson-nano-first-boot-power-issues/226672/1 "2022-08-31T19:21:33Z")

</div>

I’m trying to power on a Jetson Nano with Developer Kit for the first time.  
I’m following these instructions found [here](https://developer.nvidia.com/embedded/learn/get-started-jetson-nano-devkit#intro-included).  
I’ve finished imaging my microSD card and attempting power on for the first time.  
I’ve tried both a barrel style 5V connector and connecting via a Micro-USB connector. The barrel connector has been verified to output 5V (checked with a multimeter). But no LEDs come on when plugging it in.  
When plugging in the Micro-USB power supply in to the Dev Kit Board, the power on LED (by D53) comes on for about 12 seconds, long enough for the attached monitor to display the NVIDIA logo, and then turns off.  
Any suggestions?

EDIT:  
J48 is _not_ jumpered.

EDIT:  
Jumpered J48 and used the bareell connector … that worked. Turns out that the USB power supply isn’t _actually_ 5V-2A.

---

<div class="post-metadata">

**Author:** ![Trumany](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/trumany/32/14043_2.png) [@Trumany](https://forums.developer.nvidia.com/u/Trumany)\
**Post date:** [September 1, 2022, 5:27am UTC](https://forums.developer.nvidia.com/t/jetson-nano-first-boot-power-issues/226672/3 "2022-09-01T05:27:52Z")

</div>

So the issue is gone with DC supply, right? And your USB power supply is not 2A capability, right?

---

<div class="post-metadata">

**Author:** ![system](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/system/32/68080_2.png) [@system](https://forums.developer.nvidia.com/u/system)\
**Post date:** [September 28, 2022, 2:43am UTC](https://forums.developer.nvidia.com/t/jetson-nano-first-boot-power-issues/226672/5 "2022-09-28T02:43:06Z")

</div>

Closed on September 28, 2022, 2:43am UTC

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.
