Jetson nano - no signal to the monitor

Hi!

I followed Getting Started with AI on Jetson Nano course, I wrote NVIDIA DLI Jetson Nano SD Card Image (dlinano_v1-0-0_image_20GB) to the microSD card, I used USB Device Mode during the course. Now I’m trying to use Jetson separatelly, with monitor and other peripherials. After booting there is nvidia logo on monitor screen and the ‘no signal’ appears. On the other card I have Jetson Nano Developer Kit SD Card Image (jetson-nano-sd-r32.2-2019-07-16) and everything works fine with same set of peripherials.

Please share the error kernel message from UART. Thanks.