Jetson Orin Nano devkit failed to boot 36.4.3

[zhang.xiang]

use the following command to burn in the firmware:
sudo ./tools/l4t_flash_prerequisites.sh
sudo ./apply_binaries.sh
sudo ./tools/kernel_flash/l4t_initrd_flash.sh --external-device nvme0n1p1 -c tools/kernel_flash/flash_l4t_t234_nvme.xml -p “-c bootloader/generic/cfg/flash_t234_qspi.xml” --showlogs --network usb0 jetson-orin-nano-devkit internal

Nvidia 版本：36.4.3
SSD usage command: mkfs -t ext4 /dev/nvme0n1

tmpMQ3NT4QyPt.txt (3.6 KB)

[DavidDDD]

Hi,

Could you disable your firewall and reflash your device again?

Thanks

[zhang.xiang]

Thank you for your reply. The . /generic_rt_build.sh "enable " command is not run at compile time, and the firmware can be burned in.