Jetson Orin Nano does not boot after flashing Jetpack 6

[WayneWWW]

Then try another method to flash here.

Unable to Flash R36 on Orin Nano 8GB Dev Kit Using External Storage

We are investigating the error with initrd flash. In the mean time, these are the workaround First workaround First, determine what NVMe controller your NVMe SSD is on. If your NVMe SSD is on c4 controller, use command sudo ./flash.sh jetson-orin-nano-devkit-nvme internal If your NVMe SSD is on c7 controller, use command sudo UPHYLANE=c7x2 ./flash.sh jetson-orin-nano-devkit-nvme internal Since you have tried the first flash.sh command and it gets stuck, I think you NVMe SSD is on the c7 c…

If even this one cannot work, then it really could be board issue.

You can start from first workaround.