# Jetson orin nano no display when booting **URL:** \ **Category:** Jetson Orin Nano\ **Tags:** boot\ **Created:** [July 31, 2024, 1:20pm UTC](https://forums.developer.nvidia.com/t/jetson-orin-nano-no-display-when-booting/301827 "2024-07-31T13:20:27Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![sebastien.grand1](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@sebastien.grand1](https://forums.developer.nvidia.com/u/sebastien.grand1)\ **Post date:** [July 31, 2024, 1:20pm UTC](https://forums.developer.nvidia.com/t/jetson-orin-nano-no-display-when-booting/301827/1 "2024-07-31T13:20:27Z")
Jetson orin nano has no display when starting up the card. I can’t even provide logs, as I can’t even see anything on the screen. The green light is ok, so I think the power is ok. I have flashed again the SD card, but it does not change anything. Is it possible that the card is dead ? ---
**Author:** ![kayccc](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/kayccc/32/14043_2.png) [@kayccc](https://forums.developer.nvidia.com/u/kayccc)\ **Post date:** [August 1, 2024, 12:01am UTC](https://forums.developer.nvidia.com/t/jetson-orin-nano-no-display-when-booting/301827/3 "2024-08-01T00:01:35Z")
Which JetPack version you flashed on SD card? Could you try to have a Ubuntu host PC to ownload SDK Manager to your host and follow user guide steps to re-flash BSP on your device? Download link: [SDK Manager | NVIDIA Developer](https://developer.nvidia.com/sdk-manager) User Guide: [NVIDIA SDK Manager Documentation — SDK Manager 2.1.0 documentation](https://docs.nvidia.com/sdk-manager/index.html) [Install Jetson Software with SDK Manager — SDK Manager 2.1.0 documentation](https://docs.nvidia.com/sdk-manager/install-with-sdkm-jetson/index.html) ---
**Author:** ![sebastien.grand1](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@sebastien.grand1](https://forums.developer.nvidia.com/u/sebastien.grand1)\ **Post date:** [August 1, 2024, 7:13am UTC](https://forums.developer.nvidia.com/t/jetson-orin-nano-no-display-when-booting/301827/4 "2024-08-01T07:13:21Z")
Falshed jetpack 6.0. I will follow your recommandations. Actually the board was working well but I reset settings in the bios, then the board crashed and nothing worked after that. Thanks ---
**Author:** ![sebastien.grand1](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@sebastien.grand1](https://forums.developer.nvidia.com/u/sebastien.grand1)\ **Post date:** [August 2, 2024, 8:27am UTC](https://forums.developer.nvidia.com/t/jetson-orin-nano-no-display-when-booting/301827/5 "2024-08-02T08:27:43Z")
I have tested to communicate with the board using serial console and putty and the console remains locked after: ASSERT [FvNorFlashStandaloneMm] /out/nvidia/optee.t234-uefi/StandaloneMmOptee\_RELEASE/edk2-nvidia/Silicon/NVIDIA/Drivers/FvbForFlashDxe/FvbNorFlashStandaloneMm.c (937): ((BOOLEAN) (0==1)) Don’t understand that. And putty is locked, I can’t write anything after this line. ---
**Author:** ![KevinFFF](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/kevinfff/32/15508_2.png) [@KevinFFF](https://forums.developer.nvidia.com/u/KevinFFF)\ **Post date:** [August 7, 2024, 12:24pm UTC](https://forums.developer.nvidia.com/t/jetson-orin-nano-no-display-when-booting/301827/6 "2024-08-07T12:24:33Z")
> [@sebastien.grand1](#): > > ASSERT [FvNorFlashStandaloneMm] /out/nvidia/optee.t234-uefi/StandaloneMmOptee\_RELEASE/edk2-nvidia/Silicon/NVIDIA/Drivers/FvbForFlashDxe/FvbNorFlashStandaloneMm.c (937): ((BOOLEAN) (0==1)) Please refer to the following thread to flash QSPI only to recover from this. [Re-Flash AGX Orin without flashing APP partition - #8 by KevinFFF](https://forums.developer.nvidia.com/t/re-flash-agx-orin-without-flashing-app-partition/301168/8) ---
**Author:** ![system](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/system/32/68080_2.png) [@system](https://forums.developer.nvidia.com/u/system)\ **Post date:** [August 27, 2024, 8:09am UTC](https://forums.developer.nvidia.com/t/jetson-orin-nano-no-display-when-booting/301827/8 "2024-08-27T08:09:45Z")
Closed on August 27, 2024, 8:09am UTC This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.