Jetson Orin Nano Not Booting After Flashing – No HDMI, No Fan Spin

Robotics & Edge Computing Jetson & Embedded Systems Jetson Orin Nano
1

Hello

After successfully flashing my Jetson Orin Nano, it is not booting. The fan does not spin, and there is no HDMI signal. However, the fan gets warm (around 45°C) when it remained on during flashing.
Here are the observations:
The Power LED is solid red when powered on.
Pressing the Power button turns off the Power LED**, and then the **SSD’s LED starts flashing red.
The system seems to have some activity, but the fan does not spin and there is no display output.

Could someone assist me in troubleshooting this issue?

Thank you,
Uche Nwoko

2

Hi,

I notice you mentioned a keyword here “HDMI”. The default software on Orin Nano devkit is DP but not HDMI.

Are you using a NV devkit or a custom board?

3

Hello, thanks for getting back to me, sorry its DV to HDMI, and I am using Jetson Orin Nano DevKit.

4

Is it possible to use a pure DP monitor first?

5

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.