Jetson Orin Nano/NX GPIO/WAKE pin(GPIO00~GPIO14)

Robotics & Edge Computing Jetson & Embedded Systems Jetson Orin Nano
,
1

Hi NV teams,
according to last post link: Jetson AGX Orin Platform Adaptation and Bring-Up — NVIDIA Jetson Linux Developer Guide 1 documentation,
If the pin has an ID in the Wake column in the pinmux spreadsheet, a GPIO pin can wake the device from a suspended stage.,

I found only GPIO00/GPIO02 maked as Yes, GPIO06/GPIO10 maked as No(could be selectable to be Yes). Other GPIOs(GPIO01/GPIO03~GPIO05/GPIO07~GPIO09/GPIO11~GPIO14) with no mark(in grey color), my question is whether those GPIOs marked in grey in Wake column do NOT support Wake function for customer design in other projects? Are those maked Yes or No supporting Wake function then?

Jasperni
20240712

3

Hi jasperni,

Yes, please configure them as Yes before using them for Wake function.

You can also refer to the note in Wake Pin column.
Some pins are wake-capable. For the wake capable pins, select Yes or No to determine if the pin will be used as a wake source.

4

Got, thanks very much.

6

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.