Hello,
I purchased a Jetson orin nano, added a ssd, I put it in recovery mode and tried to flash it in terminal following the steps in Developer guide Nvidia. I tried various times but it is always stuck in this line :
[ 9.4964 ] tegrarcm_v2 --chip 0x23 0 --oem platformdetails storage storage_info.bin
My host PC is a Ubuntu 20.04.
Does it look familiar to you ?
Thank you in advance.
Please attach full log… just one line won’t provide much help.
Here there are :
I have various warnings like these during the process :
[ 7.1038 ] WARNING: unknown node ‘g2’
[ 7.1040 ] WARNING: unknown node ‘g2’
[ 7.1042 ] WARNING: unknown node ‘g9’
[ 7.1042 ] WARNING: unknown node ‘g9’
[…]
[ 7.1043 ] WARNING: unknown property ‘major’
[ 7.1043 ] WARNING: unknown property ‘minor’
[…]
[ 7.1215 ] Warning: pub_key.key is not found
[…]
[ 8.5997 ] tegrabct_v2 --chip 0x23 0 --mb2bct mb2_bct.cfg --recov --mb2bctcfg tegra234-mb2-bct-misc-p3767-0000_cpp.dtb --scr tegra234-mb2-bct-scr-p3767-0000_cpp.dtb
[ 8.6009 ] ERROR: value 0x31 is out of range
[ 8.6022 ] ERROR: value 0x31 is out of range
[ 8.6026 ] ERROR: value 0x31 is out of range
[ 8.6029 ] ERROR: value 0x31 is out of range
[ 8.6031 ] WARNING: unknown property ‘tfc_version’
[ 8.6034 ] WARNING: unknown property ‘addr_header_version’
[…]
[ 9.4967 ] Not supported type: mb2_applet
And it is stuck at :
[ 11.0227 ] Retrieving storage infomation
[ 11.0241 ] tegrarcm_v2 --chip 0x23 0 --oem platformdetails storage storage_info.bin
I can only repeat my comment again because I really no need you to share partial errors to us…
Please attach full log… just one line won’t provide much help.
We only need full log.
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.