Hi @mrKallah
It seems that you are trying to flash the device with a backup that you previously saved. Have you tested flashing the device Orin NX with the SDKManager just to ensure that the problem is not related to this?
Have you tested the steps mentioned in this documentation? You could also test running the following command to disable autosuspend on your host PC as recommended on this forum topic:
sudo -s echo -1 > /sys/module/usbcore/parameters/autosuspend
Please tell me how this goes.
Regards,
Ricardo González Víquez
Embedded SW Engineer at RidgeRun
Contact us: support@ridgerun.com
Developers wiki: https://developer.ridgerun.com
Website: www.ridgerun.com