Jetson orin nx ：can “candump can0” Messages cannot be received, but “cansend” can be sent

Robotics & Edge Computing Jetson & Embedded Systems Jetson Orin NX
,
5

I don’t think pimux is involved here, and ，I tried typing the following command into Jetson-Xavier-NX. It can be used

sudo busybox devmem 0x0c303020 32 0x0000C458
sudo busybox devmem 0x0c303018 32 0x0000C400
sudo modprobe can_raw
sudo modprobe mttcan
sudo ip link set can0 type can bitrate 500000 loopback on
sudo ip link set can0 up

but jeston-orin-nx ，The system will freeze

I can send a message, I just can’t get it