Jetson TX1 drone Mission Controller for AdaPilot initiative

Hi to all,

I would like to introduce to you the new open source initiative AdaPilot, a Ada-SPARK high-integrity language and ARM Cortex MCU based digital flight control system. The Jetson TX1 has been selected as the external Mission Control Computer and will send autopilot steering commands (roll/pitch/yaw/thrust) via the CAN bus using the CANaerospace protocol. The autopilot can also be used for any other kind of unmanned system, such as for rovers, rov, usv, etc.

The function of the Jetson will mainly be object recognition.

The initiative is looking for Jetson passionates interested to join the AdaPilot Mission Controller dev community. To be clear, the Jetson must not be programmed in Ada ;-)

Here the project page:

Hope to can welcome you onboard soon.



Is this your website?