When we test the Orin NX 16GB platform with JP 5.1.2, we see error log of NVMe , Wifi and Kernel Panic error log as attached. Can we consult with you does that mean? Will it be fixed on JP6.1
(Wifi device: M.2 E Key 2230 module Intel AX210, NVMe device: M.2 M Key 2280 PCIe Gen4x4 SSD Transcend TS2TMTE712AI-VS1)
JP5.1.2-1.txt (537.4 KB)
What kind of log are you trying to share here? I have no idea why a log file took 20MB here.
If there are too many dummy information, please filter it out and post useful info only.
Reduce log file size.
42406.863876] tegra186_gpio_irq+0x1a0/0x1e0
[42406.868066] generic_handle_irq+0x3c/0x60
[42406.872171] __handle_domain_irq+0x6c/0xc0
[42406.876363] gic_handle_irq+0x64/0x130
[42406.880215] el1_irq+0xd0/0x180
[42406.883421] run_timer_softirq+0x4f4/0x5d0
[42406.887620] __do_softirq+0x138/0x3e0
[42406.891370] irq_exit+0xc0/0xe0
[42406.894581] __handle_domain_irq+0x70/0xc0
[42406.898770] gic_handle_irq+0x64/0x130
[42406.902609] el1_irq+0xd0/0x180
[42406.905821] cpuidle_enter_state+0xb4/0x400
[42406.910098] cpuidle_enter+0x3c/0x50
[42406.913753] call_cpuidle+0x40/0x70
[42406.917321] do_idle+0x1fc/0x260
[42406.920618] cpu_startup_entry+0x2c/0x70
[42406.924636] rest_init+0xd8/0xe4
[42406.927940] arch_call_rest_init+0x14/0x1c
[42406.932132] start_kernel+0x4f8/0x52c
[42406.935874] —[ end trace 57a598ca38e33f38 ]—
This issue is from HDMI GPIO hpd. This is a known issue and will not fix on jetpack5. Got fixed on jetpack6.
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.