Hi, Guys Burning KEK2 fuse failed on my Jetson Xavier develop kit (sys version: L4T R32.3.1), below are cmd info and steps: 1, Run “sudo ./odmfuse.sh -c NS -i 0x19 --KEK2 fuse-key/kek2.txt --noburn jetson-xavier” to test if cmd work，it seems sucess and create “fuseblob.tbz2” 2, connect develope…

Finally burn successful on Xavier，see ： another post & conclusion

KEK Fuse burn failed on Jetson Xavier R32.3.1

Robotics & Edge Computing Jetson & Embedded Systems Jetson AGX Xavier

JerryChang May 15, 2020, 6:11am 3

hello mowa,

please refer to Topic 82518 for the patch to correct KEK256 key burning of odmfuse script options
you might also check Topic 121931 to add support for reading KEK0, KEK1, KEK2 fuses on Xavier.
thanks

Topic		Replies	Views
Fuse burning failure after a successful KEK0 Jetson TX2 nvbugs	11	1531	October 18, 2021
Unable to burn fuses (dev kit) / no more output (serial/hdmi) / bricked? Jetson AGX Xavier security , nvbugs	93	7051	October 18, 2021
【Resolved】Finally Successful burn fuses on xavier and the experience share, thanks Jetson AGX Xavier security , nvbugs	5	2467	October 18, 2021
Postmortem: Jetson Xavier AGX will not get past Boot ROM after burning PKC+SBK+KEK256 Jetson AGX Xavier security	9	2026	April 20, 2022
Secure Boot odmfuse programming step fail on 32.2.1 Jetson TX2	20	2789	October 18, 2021
Secure Boot TX2i Jetson TX2 security	4	1371	October 18, 2021
Jetson Xavier NX burn Tegra fuses made the device unbootable Jetson Xavier NX security , nvbugs	24	2967	October 18, 2021
Concerns about fuse burning on TX2 Jetson TX2 security , nvbugs	32	3776	October 18, 2021
How to burn ODM fuse bits (TX2)? Jetson TX2 security	30	2806	October 18, 2021
burn fuses issue Jetson AGX Xavier	6	1490	October 18, 2021

KEK Fuse burn failed on Jetson Xavier R32.3.1

Related topics