Lenovo Thinkpad P50 Bumblebee NVidia driver load issue

Dear NVidia Support,
I have not been able to get the NVidia driver to load on my current Lenovo Thinkpad P50. I previously had it working on a Lenovo Thinkpad W541, but I had to turn that in and it is no longer available. Here are the latest intersting parts from kernel.log:

Sep 3 17:34:44 new-host-2 kernel: nvidia-nvlink: Unregistered the Nvlink Core, major device number 239
Sep 3 17:34:44 new-host-2 kernel: bbswitch_nv: got NVidia device 0000:01:00.0
Sep 3 17:37:43 new-host-2 kernel: bbswitch_nv: suspending
Sep 3 17:37:43 new-host-2 kernel: bbswitch_nv: resuming
Sep 3 18:08:58 new-host-2 kernel: rfkill: input handler enabled
Sep 3 18:09:37 localhost kernel: SELinux: Disabled at runtime.
Sep 3 18:09:37 localhost kernel: SELinux: Unregistering netfilter hooks
Sep 3 18:09:37 localhost kernel: ip_tables: © 2000-2006 Netfilter Core Team
Sep 3 18:09:37 localhost kernel: [drm] RC6 on
Sep 3 18:09:37 localhost kernel: random: crng init done
Sep 3 18:09:37 localhost kernel: resource sanity check: requesting [mem 0xfed10000-0xfed17fff], which spans more than pnp 00:01 [mem 0xfed10000-0xfed13fff]
Sep 3 18:09:37 localhost kernel: caller ie31200_init_one+0x100/0x580 [ie31200_edac] mapping multiple BARs
Sep 3 18:09:37 localhost kernel: EDAC MC0: Giving out device to ‘ie31200_edac’ ‘IE31200’: DEV 0000:00:00.0
Sep 3 18:09:37 localhost kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Sep 3 18:09:37 localhost kernel: i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
Sep 3 18:09:37 localhost kernel: i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
Sep 3 18:09:37 localhost kernel: mei_me 0000:00:16.0: enabling device (0000 -> 0002)
Sep 3 18:09:37 localhost kernel: mei_me 0000:00:16.0: irq 141 for MSI/MSI-X
Sep 3 18:09:37 localhost kernel: thinkpad_acpi: ThinkPad ACPI Extras v0.25
Sep 3 18:09:37 localhost kernel: thinkpad_acpi: http://ibm-acpi.sf.net/
Sep 3 18:09:37 localhost kernel: thinkpad_acpi: ThinkPad BIOS N1EET78W (1.51 ), EC unknown
Sep 3 18:09:37 localhost kernel: thinkpad_acpi: Lenovo ThinkPad P50, model 20EN001QUS
Sep 3 18:09:37 localhost kernel: ipmi message handler version 39.2
Sep 3 18:09:37 localhost kernel: thinkpad_acpi: detected a 8-level brightness capable ThinkPad
Sep 3 18:09:37 localhost kernel: thinkpad_acpi: radio switch found; radios are enabled
Sep 3 18:09:37 localhost kernel: thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
Sep 3 18:09:37 localhost kernel: thinkpad_acpi: Disabling thinkpad-acpi brightness events by default…
Sep 3 18:09:37 localhost kernel: ipmi device interface
Sep 3 18:09:37 localhost kernel: thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
Sep 3 18:09:37 localhost kernel: thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
Sep 3 18:09:37 localhost kernel: input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
Sep 3 18:09:37 localhost kernel: btintel: Unknown symbol hci_cmd_sync (err 0)
Sep 3 18:09:37 localhost kernel: btintel: Unknown symbol bt_info (err 0)
Sep 3 18:09:37 localhost kernel: btintel: Unknown symbol bt_err (err 0)
Sep 3 18:09:37 localhost kernel: btintel: Unknown symbol __hci_cmd_sync (err 0)
Sep 3 18:09:37 localhost kernel: input: PC Speaker as /devices/platform/pcspkr/input/input8
Sep 3 18:09:37 localhost kernel: btintel: Unknown symbol hci_cmd_sync (err 0)
Sep 3 18:09:37 localhost kernel: btintel: Unknown symbol bt_info (err 0)
Sep 3 18:09:37 localhost kernel: btintel: Unknown symbol bt_err (err 0)
Sep 3 18:09:37 localhost kernel: btintel: Unknown symbol __hci_cmd_sync (err 0)
Sep 3 18:09:37 localhost kernel: btintel: Unknown symbol hci_cmd_sync (err 0)
Sep 3 18:09:37 localhost kernel: btintel: Unknown symbol bt_info (err 0)
Sep 3 18:09:37 localhost kernel: btintel: Unknown symbol bt_err (err 0)
Sep 3 18:09:37 localhost kernel: btintel: Unknown symbol __hci_cmd_sync (err 0)
Sep 3 18:09:37 localhost kernel: Linux video capture interface: v2.00
Sep 3 18:09:37 localhost kernel: cryptd: max_cpu_qlen set to 100
Sep 3 18:09:37 localhost kernel: btintel: Unknown symbol hci_cmd_sync (err 0)
Sep 3 18:09:37 localhost kernel: btintel: Unknown symbol bt_info (err 0)
Sep 3 18:09:37 localhost kernel: btintel: Unknown symbol bt_err (err 0)
Sep 3 18:09:37 localhost kernel: btintel: Unknown symbol __hci_cmd_sync (err 0)
Sep 3 18:09:37 localhost kernel: nvidia: module license ‘NVIDIA’ taints kernel.
Sep 3 18:09:37 localhost kernel: Disabling lock debugging due to kernel taint
Sep 3 18:09:37 localhost kernel: uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b52c)
Sep 3 18:09:37 localhost kernel: input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input9
Sep 3 18:09:37 localhost kernel: usbcore: registered new interface driver uvcvideo
Sep 3 18:09:37 localhost kernel: USB Video Class driver (1.1.1)
Sep 3 18:09:37 localhost kernel: AVX2 version of gcm_enc/dec engaged.
Sep 3 18:09:37 localhost kernel: AES CTR mode by8 optimization enabled
Sep 3 18:09:37 localhost kernel: snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
Sep 3 18:09:37 localhost kernel: snd_hda_intel 0000:00:1f.3: irq 142 for MSI/MSI-X
Sep 3 18:09:37 localhost kernel: alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
Sep 3 18:09:37 localhost kernel: alg: No test for __generic-gcm-aes-aesni (_driver-generic-gcm-aes-aesni)
Sep 3 18:09:37 localhost kernel: snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC298: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
Sep 3 18:09:37 localhost kernel: snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
Sep 3 18:09:37 localhost kernel: snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x17/0x21/0x0/0x0/0x0)
Sep 3 18:09:37 localhost kernel: snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
Sep 3 18:09:37 localhost kernel: snd_hda_codec_realtek hdaudioC0D0: inputs:
Sep 3 18:09:37 localhost kernel: snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
Sep 3 18:09:37 localhost kernel: snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
Sep 3 18:09:37 localhost kernel: snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
Sep 3 18:09:37 localhost kernel: XFS (nvme0n1p6): Mounting V5 Filesystem
Sep 3 18:09:37 localhost kernel: iTCO_vendor_support: vendor-support=0
Sep 3 18:09:37 localhost kernel: XFS (nvme0n1p6): Ending clean mount
Sep 3 18:09:37 localhost kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
Sep 3 18:09:37 localhost kernel: iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
Sep 3 18:09:37 localhost kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Sep 3 18:09:37 localhost kernel: Intel® Wireless WiFi driver for Linux
Sep 3 18:09:37 localhost kernel: Copyright© 2003- 2015 Intel Corporation
Sep 3 18:09:37 localhost kernel: iwlwifi 0000:04:00.0: enabling device (0000 -> 0002)
Sep 3 18:09:37 localhost kernel: iwlwifi 0000:04:00.0: irq 143 for MSI/MSI-X
Sep 3 18:09:37 localhost kernel: iwlwifi: probe of 0000:04:00.0 failed with error -12
Sep 3 18:09:37 localhost kernel: input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
Sep 3 18:09:37 localhost kernel: input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
Sep 3 18:09:37 localhost kernel: input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
Sep 3 18:09:37 localhost kernel: input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
Sep 3 18:09:37 localhost kernel: intel_rapl: Found RAPL domain package
Sep 3 18:09:37 localhost kernel: intel_rapl: Found RAPL domain core
Sep 3 18:09:37 localhost kernel: intel_rapl: Found RAPL domain uncore
Sep 3 18:09:37 localhost kernel: intel_rapl: Found RAPL domain dram
Sep 3 18:09:37 localhost kernel: nvidia-nvlink: Nvlink Core is being initialized, major device number 239
Sep 3 18:09:37 localhost kernel: NVRM: The NVIDIA probe routine was not called for 1 device(s).
Sep 3 18:09:37 localhost kernel: NVRM: This can occur when a driver such as: #012NVRM: nouveau, rivafb, nvidiafb or rivatv #012NVRM: was loaded and obtained ownership of the NVIDIA device(s).
Sep 3 18:09:37 localhost kernel: NVRM: Try unloading the conflicting kernel module (and/or#012NVRM: reconfigure your kernel without the conflicting#012NVRM: driver(s)), then try loading the NVIDIA kernel module#012NVRM: again.
Sep 3 18:09:37 localhost kernel: NVRM: No NVIDIA graphics adapter probed!
Sep 3 18:09:37 localhost kernel: nvidia-nvlink: Unregistered the Nvlink Core, major device number 239
Sep 3 18:09:37 localhost kernel: Adding 32899068k swap on /dev/mapper/centos7_wrtgovntbk-swap. Priority:-1 extents:1 across:32899068k SSFS
Sep 3 18:09:37 localhost kernel: psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
Sep 3 18:09:38 localhost kernel: audit_printk_skb: 198 callbacks suppressed
Sep 3 18:09:38 localhost kernel: type=1130 audit(1536012578.870:75): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=lvm2-pvscan@259:7 comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
Sep 3 18:09:38 localhost kernel: XFS (dm-4): Mounting V5 Filesystem
Sep 3 18:09:38 localhost kernel: XFS (dm-4): Ending clean mount
Sep 3 18:09:38 localhost kernel: type=1130 audit(1536012578.890:76): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=nfs-config comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
Sep 3 18:09:38 localhost kernel: type=1131 audit(1536012578.890:77): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=nfs-config comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
Sep 3 18:09:38 localhost kernel: type=1130 audit(1536012578.899:78): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=plymouth-read-write comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
Sep 3 18:09:38 localhost kernel: type=1131 audit(1536012578.899:79): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=plymouth-read-write comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
Sep 3 18:09:38 localhost kernel: type=1130 audit(1536012578.906:80): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=rhel-import-state comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
Sep 3 18:09:38 localhost kernel: type=1130 audit(1536012578.918:81): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-tmpfiles-setup comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
Sep 3 18:09:38 localhost kernel: type=1305 audit(1536012578.934:82): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 res=1
Sep 3 18:09:38 localhost kernel: type=1305 audit(1536012578.934:83): audit_pid=1039 old=0 auid=4294967295 ses=4294967295 res=1
Sep 3 18:09:38 localhost kernel: RPC: Registered named UNIX socket transport module.
Sep 3 18:09:38 localhost kernel: RPC: Registered udp transport module.
Sep 3 18:09:38 localhost kernel: RPC: Registered tcp transport module.
Sep 3 18:09:38 localhost kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Sep 3 18:09:39 localhost kernel: psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
Sep 3 18:09:39 localhost kernel: input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input14
Sep 3 18:09:39 localhost kernel: ip6_tables: © 2000-2006 Netfilter Core Team
Sep 3 18:09:39 localhost kernel: Ebtables v2.0 registered
Sep 3 18:09:39 localhost kernel: nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
Sep 3 18:09:39 localhost kernel: IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
Sep 3 18:09:39 localhost kernel: e1000e 0000:00:1f.6: irq 131 for MSI/MSI-X
Sep 3 18:09:39 localhost kernel: e1000e 0000:00:1f.6: irq 131 for MSI/MSI-X
Sep 3 18:09:39 localhost kernel: IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
Sep 3 18:09:39 localhost kernel: bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Sep 3 18:09:39 localhost kernel: Netfilter messages via NETLINK v0.30.
Sep 3 18:09:39 localhost kernel: ip_set: protocol 6
Sep 3 18:09:47 localhost kernel: bbswitch_nv: suspending
Sep 3 18:09:47 localhost kernel: bbswitch_nv: resuming
Sep 3 18:09:47 localhost kernel: bbswitch_nv: suspending
Sep 3 18:09:47 localhost kernel: bbswitch_nv: resuming
Sep 3 18:09:47 localhost kernel: bbswitch_nv: suspending
Sep 3 18:09:47 localhost kernel: bbswitch_nv: resuming
Sep 3 18:09:47 localhost kernel: bbswitch_nv: suspending
Sep 3 18:09:47 localhost kernel: bbswitch_nv: resuming
Sep 3 18:09:47 localhost kernel: bbswitch_nv: suspending
Sep 3 18:09:47 localhost kernel: bbswitch_nv: resuming
Sep 3 18:09:47 localhost kernel: bbswitch_nv: suspending
Sep 3 18:09:47 localhost kernel: bbswitch_nv: resuming
Sep 3 18:09:48 localhost kernel: bbswitch_nv: suspending
Sep 3 18:09:48 localhost kernel: bbswitch_nv: resuming
Sep 3 18:09:48 localhost kernel: bbswitch_nv: suspending
Sep 3 18:09:48 localhost kernel: bbswitch_nv: resuming
Sep 3 18:09:48 localhost kernel: bbswitch_nv: suspending
Sep 3 18:09:48 localhost kernel: bbswitch_nv: resuming
Sep 3 18:09:48 localhost kernel: bbswitch_nv: suspending
Sep 3 18:09:48 localhost kernel: bbswitch_nv: resuming
Sep 3 18:09:48 localhost kernel: bbswitch_nv: suspending
Sep 3 18:09:48 localhost kernel: bbswitch_nv: resuming
Sep 3 18:09:48 localhost kernel: bbswitch_nv: suspending
Sep 3 18:09:48 localhost kernel: bbswitch_nv: resuming
Sep 3 18:09:48 localhost kernel: bbswitch_nv: suspending
Sep 3 18:09:48 localhost kernel: bbswitch_nv: resuming
Sep 3 18:09:48 localhost kernel: bbswitch_nv: suspending
Sep 3 18:09:48 localhost kernel: bbswitch_nv: resuming
Sep 3 18:09:48 localhost kernel: bbswitch_nv: suspending
Sep 3 18:09:48 localhost kernel: bbswitch_nv: resuming
Sep 3 18:09:49 localhost kernel: bbswitch_nv: suspending
Sep 3 18:09:49 localhost kernel: bbswitch_nv: resuming
Sep 3 18:09:49 localhost kernel: bbswitch_nv: suspending
Sep 3 18:09:49 localhost kernel: bbswitch_nv: resuming
Sep 3 18:09:49 localhost kernel: bbswitch_nv: suspending
Sep 3 18:09:49 localhost kernel: bbswitch_nv: resuming
Sep 3 18:09:49 localhost kernel: bbswitch_nv: suspending
Sep 3 18:09:49 localhost kernel: bbswitch_nv: resuming
Sep 3 18:09:49 localhost kernel: bbswitch_nv: suspending
Sep 3 18:09:49 localhost kernel: bbswitch_nv: resuming
Sep 3 18:09:49 localhost kernel: tun: Universal TUN/TAP device driver, 1.6
Sep 3 18:09:49 localhost kernel: tun: © 1999-2004 Max Krasnyansky maxk@qualcomm.com
Sep 3 18:09:49 localhost kernel: virbr0: port 1(virbr0-nic) entered blocking state
Sep 3 18:09:49 localhost kernel: virbr0: port 1(virbr0-nic) entered disabled state
Sep 3 18:09:49 localhost kernel: device virbr0-nic entered promiscuous mode
Sep 3 18:09:49 localhost kernel: virbr0: port 1(virbr0-nic) entered blocking state
Sep 3 18:09:49 localhost kernel: virbr0: port 1(virbr0-nic) entered listening state
Sep 3 18:09:49 localhost kernel: IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
Sep 3 18:09:49 localhost kernel: virbr0: port 1(virbr0-nic) entered disabled state
Sep 3 18:10:02 localhost kernel: fuse init (API version 7.22)
Sep 3 18:10:02 localhost kernel: bbswitch_nv: suspending
Sep 3 18:10:02 localhost kernel: bbswitch_nv: resuming
Sep 3 18:10:05 localhost kernel: rfkill: input handler disabled
Sep 3 18:19:45 localhost kernel: bbswitch_nv: suspending
Sep 3 18:19:45 localhost kernel: bbswitch_nv: resuming
Sep 3 18:19:46 localhost kernel: bbswitch_nv: suspending
Sep 3 18:19:46 localhost kernel: bbswitch_nv: resuming
Sep 3 18:19:46 localhost kernel: nvidia-nvlink: Nvlink Core is being initialized, major device number 239
Sep 3 18:19:46 localhost kernel: vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
Sep 3 18:19:46 localhost kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.87 Tue Aug 21 12:33:05 PDT 2018 (using threaded interrupts)
Sep 3 18:19:46 localhost kernel: nvidia 0000:01:00.0: irq 143 for MSI/MSI-X
Sep 3 18:19:46 localhost kernel: ACPI Warning: _SB
.PCI0.PEG0.PEGP.DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
Sep 3 18:19:46 localhost kernel: ACPI Warning: _SB
.PCI0.PEG0.PEGP.DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
Sep 3 18:19:46 localhost kernel: ACPI Warning: _SB
.PCI0.PEG0.PEGP.DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
Sep 3 18:19:46 localhost kernel: ACPI Warning: _SB
.PCI0.PEG0.PEGP.DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
Sep 3 18:19:46 localhost kernel: ACPI Warning: _SB
.PCI0.PEG0.PEGP.DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
Sep 3 18:19:46 localhost kernel: ACPI Warning: _SB
.PCI0.PEG0.PEGP.DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
Sep 3 18:19:46 localhost kernel: ACPI Warning: _SB
.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
Sep 3 18:19:50 localhost kernel: NVRM: failed to copy vbios to system memory.
Sep 3 18:19:50 localhost kernel: NVRM: RmInitAdapter failed! (0x30:0xffff:663)
Sep 3 18:19:50 localhost kernel: NVRM: rm_init_adapter failed for device bearing minor number 0
Sep 3 20:27:30 localhost kernel: SELinux: Disabled at runtime.
Sep 3 20:27:30 localhost kernel: SELinux: Unregistering netfilter hooks
Sep 3 20:27:30 localhost kernel: ip_tables: © 2000-2006 Netfilter Core Team
Sep 3 20:27:30 localhost kernel: random: crng init done
Sep 3 20:27:30 localhost kernel: resource sanity check: requesting [mem 0xfed10000-0xfed17fff], which spans more than pnp 00:01 [mem 0xfed10000-0xfed13fff]
Sep 3 20:27:30 localhost kernel: caller ie31200_init_one+0x100/0x580 [ie31200_edac] mapping multiple BARs
Sep 3 20:27:30 localhost kernel: EDAC MC0: Giving out device to ‘ie31200_edac’ ‘IE31200’: DEV 0000:00:00.0
Sep 3 20:27:30 localhost kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Sep 3 20:27:30 localhost kernel: i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
Sep 3 20:27:30 localhost kernel: i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
Sep 3 20:27:30 localhost kernel: mei_me 0000:00:16.0: enabling device (0000 -> 0002)
Sep 3 20:27:30 localhost kernel: mei_me 0000:00:16.0: irq 141 for MSI/MSI-X
Sep 3 20:27:30 localhost kernel: ipmi message handler version 39.2
Sep 3 20:27:30 localhost kernel: btintel: Unknown symbol hci_cmd_sync (err 0)
Sep 3 20:27:30 localhost kernel: btintel: Unknown symbol bt_info (err 0)
Sep 3 20:27:30 localhost kernel: btintel: Unknown symbol bt_err (err 0)
Sep 3 20:27:30 localhost kernel: btintel: Unknown symbol __hci_cmd_sync (err 0)
Sep 3 20:27:30 localhost kernel: ipmi device interface
Sep 3 20:27:30 localhost kernel: btintel: Unknown symbol hci_cmd_sync (err 0)
Sep 3 20:27:30 localhost kernel: btintel: Unknown symbol bt_info (err 0)
Sep 3 20:27:30 localhost kernel: btintel: Unknown symbol bt_err (err 0)
Sep 3 20:27:30 localhost kernel: btintel: Unknown symbol __hci_cmd_sync (err 0)
Sep 3 20:27:30 localhost kernel: btintel: Unknown symbol hci_cmd_sync (err 0)
Sep 3 20:27:30 localhost kernel: btintel: Unknown symbol bt_info (err 0)
Sep 3 20:27:30 localhost kernel: btintel: Unknown symbol bt_err (err 0)
Sep 3 20:27:30 localhost kernel: btintel: Unknown symbol __hci_cmd_sync (err 0)
Sep 3 20:27:30 localhost kernel: thinkpad_acpi: ThinkPad ACPI Extras v0.25
Sep 3 20:27:30 localhost kernel: thinkpad_acpi: http://ibm-acpi.sf.net/
Sep 3 20:27:30 localhost kernel: thinkpad_acpi: ThinkPad BIOS N1EET78W (1.51 ), EC unknown
Sep 3 20:27:30 localhost kernel: thinkpad_acpi: Lenovo ThinkPad P50, model 20EN001QUS
Sep 3 20:27:30 localhost kernel: thinkpad_acpi: detected a 8-level brightness capable ThinkPad
Sep 3 20:27:30 localhost kernel: thinkpad_acpi: radio switch found; radios are enabled
Sep 3 20:27:30 localhost kernel: thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
Sep 3 20:27:30 localhost kernel: thinkpad_acpi: Disabling thinkpad-acpi brightness events by default…
Sep 3 20:27:30 localhost kernel: btintel: Unknown symbol hci_cmd_sync (err 0)
Sep 3 20:27:30 localhost kernel: btintel: Unknown symbol bt_info (err 0)
Sep 3 20:27:30 localhost kernel: btintel: Unknown symbol bt_err (err 0)
Sep 3 20:27:30 localhost kernel: btintel: Unknown symbol __hci_cmd_sync (err 0)
Sep 3 20:27:30 localhost kernel: thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
Sep 3 20:27:30 localhost kernel: thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
Sep 3 20:27:30 localhost kernel: input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
Sep 3 20:27:30 localhost kernel: Linux video capture interface: v2.00
Sep 3 20:27:30 localhost kernel: input: PC Speaker as /devices/platform/pcspkr/input/input8
Sep 3 20:27:30 localhost kernel: cryptd: max_cpu_qlen set to 100
Sep 3 20:27:30 localhost kernel: uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b52c)
Sep 3 20:27:30 localhost kernel: input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input9
Sep 3 20:27:30 localhost kernel: usbcore: registered new interface driver uvcvideo
Sep 3 20:27:30 localhost kernel: USB Video Class driver (1.1.1)
Sep 3 20:27:30 localhost kernel: nvidia: module license ‘NVIDIA’ taints kernel.
Sep 3 20:27:30 localhost kernel: Disabling lock debugging due to kernel taint
Sep 3 20:27:30 localhost kernel: AVX2 version of gcm_enc/dec engaged.
Sep 3 20:27:30 localhost kernel: AES CTR mode by8 optimization enabled
Sep 3 20:27:30 localhost kernel: snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
Sep 3 20:27:30 localhost kernel: alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
Sep 3 20:27:30 localhost kernel: alg: No test for __generic-gcm-aes-aesni (_driver-generic-gcm-aes-aesni)
Sep 3 20:27:30 localhost kernel: snd_hda_intel 0000:00:1f.3: irq 142 for MSI/MSI-X
Sep 3 20:27:30 localhost kernel: snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC298: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
Sep 3 20:27:30 localhost kernel: snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
Sep 3 20:27:30 localhost kernel: snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x17/0x21/0x0/0x0/0x0)
Sep 3 20:27:30 localhost kernel: snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
Sep 3 20:27:30 localhost kernel: snd_hda_codec_realtek hdaudioC0D0: inputs:
Sep 3 20:27:30 localhost kernel: snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
Sep 3 20:27:30 localhost kernel: snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
Sep 3 20:27:30 localhost kernel: snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
Sep 3 20:27:30 localhost kernel: intel_rapl: Found RAPL domain package
Sep 3 20:27:30 localhost kernel: intel_rapl: Found RAPL domain core
Sep 3 20:27:30 localhost kernel: intel_rapl: Found RAPL domain uncore
Sep 3 20:27:30 localhost kernel: intel_rapl: Found RAPL domain dram
Sep 3 20:27:30 localhost kernel: input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
Sep 3 20:27:30 localhost kernel: input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
Sep 3 20:27:30 localhost kernel: input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
Sep 3 20:27:30 localhost kernel: input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
Sep 3 20:27:30 localhost kernel: XFS (nvme0n1p6): Mounting V5 Filesystem
Sep 3 20:27:30 localhost kernel: XFS (nvme0n1p6): Ending clean mount
Sep 3 20:27:30 localhost kernel: Intel® Wireless WiFi driver for Linux
Sep 3 20:27:30 localhost kernel: Copyright© 2003- 2015 Intel Corporation
Sep 3 20:27:30 localhost kernel: iwlwifi 0000:04:00.0: enabling device (0000 -> 0002)
Sep 3 20:27:30 localhost kernel: iwlwifi 0000:04:00.0: irq 143 for MSI/MSI-X
Sep 3 20:27:30 localhost kernel: iwlwifi 0000:04:00.0: loaded firmware version 34.0.1 op_mode iwlmvm
Sep 3 20:27:30 localhost kernel: iTCO_vendor_support: vendor-support=0
Sep 3 20:27:30 localhost kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
Sep 3 20:27:30 localhost kernel: iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
Sep 3 20:27:30 localhost kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Sep 3 20:27:30 localhost kernel: nvidia-nvlink: Nvlink Core is being initialized, major device number 239
Sep 3 20:27:30 localhost kernel: NVRM: The NVIDIA probe routine was not called for 1 device(s).
Sep 3 20:27:30 localhost kernel: NVRM: This can occur when a driver such as: #012NVRM: nouveau, rivafb, nvidiafb or rivatv #012NVRM: was loaded and obtained ownership of the NVIDIA device(s).
Sep 3 20:27:30 localhost kernel: NVRM: Try unloading the conflicting kernel module (and/or#012NVRM: reconfigure your kernel without the conflicting#012NVRM: driver(s)), then try loading the NVIDIA kernel module#012NVRM: again.
Sep 3 20:27:30 localhost kernel: NVRM: No NVIDIA graphics adapter probed!
Sep 3 20:27:30 localhost kernel: nvidia-nvlink: Unregistered the Nvlink Core, major device number 239
Sep 3 20:27:30 localhost kernel: iwlwifi 0000:04:00.0: Detected Intel® Dual Band Wireless AC 8260, REV=0x208
Sep 3 20:27:30 localhost kernel: psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
Sep 3 20:27:30 localhost kernel: Adding 32899068k swap on /dev/mapper/centos7_wrtgovntbk-swap. Priority:-1 extents:1 across:32899068k SSFS
Sep 3 20:27:30 localhost kernel: iwlwifi 0000:04:00.0: base HW address: 34:f3:9a:47:71:4c
Sep 3 20:27:31 localhost kernel: ieee80211 phy0: Selected rate control algorithm ‘iwl-mvm-rs’
Sep 3 20:27:31 localhost kernel: thermal thermal_zone1: failed to read out thermal zone 1
Sep 3 20:27:31 localhost kernel: audit_printk_skb: 201 callbacks suppressed
Sep 3 20:27:31 localhost kernel: type=1130 audit(1536020851.894:76): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=lvm2-pvscan@259:7 comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
Sep 3 20:27:31 localhost kernel: type=1130 audit(1536020851.895:77): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=lvm2-pvscan@259:5 comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
Sep 3 20:27:31 localhost kernel: XFS (dm-5): Mounting V5 Filesystem
Sep 3 20:27:31 localhost kernel: XFS (dm-5): Ending clean mount
Sep 3 20:27:31 localhost kernel: type=1130 audit(1536020851.918:78): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=nfs-config comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
Sep 3 20:27:31 localhost kernel: type=1131 audit(1536020851.918:79): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=nfs-config comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
Sep 3 20:27:31 localhost kernel: type=1130 audit(1536020851.924:80): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=plymouth-read-write comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
Sep 3 20:27:31 localhost kernel: type=1131 audit(1536020851.924:81): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=plymouth-read-write comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
Sep 3 20:27:31 localhost kernel: type=1130 audit(1536020851.931:82): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=rhel-import-state comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
Sep 3 20:27:31 localhost kernel: type=1130 audit(1536020851.943:83): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-tmpfiles-setup comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
Sep 3 20:27:31 localhost kernel: type=1305 audit(1536020851.955:84): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 res=1
Sep 3 20:27:31 localhost kernel: type=1305 audit(1536020851.955:85): audit_pid=1085 old=0 auid=4294967295 ses=4294967295 res=1
Sep 3 20:27:31 localhost kernel: RPC: Registered named UNIX socket transport module.
Sep 3 20:27:31 localhost kernel: RPC: Registered udp transport module.
Sep 3 20:27:31 localhost kernel: RPC: Registered tcp transport module.
Sep 3 20:27:31 localhost kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Sep 3 20:27:32 localhost kernel: psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
Sep 3 20:27:32 localhost kernel: input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input14
Sep 3 20:27:32 localhost kernel: ip6_tables: © 2000-2006 Netfilter Core Team
Sep 3 20:27:32 localhost kernel: Ebtables v2.0 registered
Sep 3 20:27:32 localhost kernel: nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
Sep 3 20:27:32 localhost kernel: IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
Sep 3 20:27:32 localhost kernel: e1000e 0000:00:1f.6: irq 132 for MSI/MSI-X
Sep 3 20:27:32 localhost kernel: e1000e 0000:00:1f.6: irq 132 for MSI/MSI-X
Sep 3 20:27:32 localhost kernel: IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
Sep 3 20:27:32 localhost kernel: IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
Sep 3 20:27:33 localhost kernel: IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
Sep 3 20:27:33 localhost kernel: IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
Sep 3 20:27:33 localhost kernel: bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Sep 3 20:27:33 localhost kernel: Netfilter messages via NETLINK v0.30.
Sep 3 20:27:33 localhost kernel: ip_set: protocol 6
Sep 3 20:27:33 localhost kernel: IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
Sep 3 20:27:40 localhost kernel: bbswitch_nv: suspending
Sep 3 20:27:40 localhost kernel: bbswitch_nv: resuming
Sep 3 20:27:40 localhost kernel: bbswitch_nv: suspending
Sep 3 20:27:40 localhost kernel: bbswitch_nv: resuming
Sep 3 20:27:40 localhost kernel: bbswitch_nv: suspending
Sep 3 20:27:40 localhost kernel: bbswitch_nv: resuming
Sep 3 20:27:40 localhost kernel: bbswitch_nv: suspending
Sep 3 20:27:40 localhost kernel: bbswitch_nv: resuming
Sep 3 20:27:40 localhost kernel: bbswitch_nv: suspending
Sep 3 20:27:40 localhost kernel: bbswitch_nv: resuming
Sep 3 20:27:40 localhost kernel: bbswitch_nv: suspending
Sep 3 20:27:40 localhost kernel: bbswitch_nv: resuming
Sep 3 20:27:40 localhost kernel: bbswitch_nv: suspending
Sep 3 20:27:40 localhost kernel: bbswitch_nv: resuming
Sep 3 20:27:41 localhost kernel: bbswitch_nv: suspending
Sep 3 20:27:41 localhost kernel: bbswitch_nv: resuming
Sep 3 20:27:41 localhost kernel: bbswitch_nv: suspending
Sep 3 20:27:41 localhost kernel: bbswitch_nv: resuming
Sep 3 20:27:41 localhost kernel: bbswitch_nv: suspending
Sep 3 20:27:41 localhost kernel: bbswitch_nv: resuming
Sep 3 20:27:41 localhost kernel: bbswitch_nv: suspending
Sep 3 20:27:41 localhost kernel: bbswitch_nv: resuming
Sep 3 20:27:41 localhost kernel: bbswitch_nv: suspending
Sep 3 20:27:41 localhost kernel: bbswitch_nv: resuming
Sep 3 20:27:41 localhost kernel: tun: Universal TUN/TAP device driver, 1.6
Sep 3 20:27:41 localhost kernel: tun: © 1999-2004 Max Krasnyansky maxk@qualcomm.com
Sep 3 20:27:41 localhost kernel: virbr0: port 1(virbr0-nic) entered blocking state
Sep 3 20:27:41 localhost kernel: virbr0: port 1(virbr0-nic) entered disabled state
Sep 3 20:27:41 localhost kernel: device virbr0-nic entered promiscuous mode
Sep 3 20:27:41 localhost kernel: virbr0: port 1(virbr0-nic) entered blocking state
Sep 3 20:27:41 localhost kernel: virbr0: port 1(virbr0-nic) entered listening state
Sep 3 20:27:41 localhost kernel: IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
Sep 3 20:27:41 localhost kernel: virbr0: port 1(virbr0-nic) entered disabled state
Sep 3 20:27:42 localhost kernel: bbswitch_nv: suspending
Sep 3 20:27:42 localhost kernel: bbswitch_nv: resuming
Sep 3 20:27:42 localhost kernel: bbswitch_nv: suspending
Sep 3 20:27:42 localhost kernel: bbswitch_nv: resuming
Sep 3 20:27:42 localhost kernel: bbswitch_nv: suspending
Sep 3 20:27:42 localhost kernel: bbswitch_nv: resuming
Sep 3 20:27:54 localhost kernel: fuse init (API version 7.22)
Sep 3 20:27:55 localhost kernel: bbswitch_nv: suspending
Sep 3 20:27:55 localhost kernel: bbswitch_nv: resuming
Sep 3 20:27:58 localhost kernel: rfkill: input handler disabled
Sep 3 20:28:01 localhost kernel: IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
Sep 3 20:28:02 localhost kernel: wlp4s0: authenticate with a0:21:b7:61:d6:e2
Sep 3 20:28:02 localhost kernel: wlp4s0: send auth to a0:21:b7:61:d6:e2 (try 1/3)
Sep 3 20:28:02 localhost kernel: wlp4s0: authenticated
Sep 3 20:28:02 localhost kernel: wlp4s0: associate with a0:21:b7:61:d6:e2 (try 1/3)
Sep 3 20:28:02 localhost kernel: wlp4s0: RX AssocResp from a0:21:b7:61:d6:e2 (capab=0x11 status=0 aid=14)
Sep 3 20:28:02 localhost kernel: wlp4s0: associated
Sep 3 20:28:02 localhost kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
Sep 3 20:28:02 localhost kernel: alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
Sep 3 20:33:17 localhost kernel: bbswitch_nv: suspending
Sep 3 20:33:17 localhost kernel: bbswitch_nv: resuming
Sep 3 20:33:17 localhost kernel: bbswitch_nv: suspending
Sep 3 20:33:17 localhost kernel: bbswitch_nv: resuming
Sep 3 20:33:18 localhost kernel: nvidia-nvlink: Nvlink Core is being initialized, major device number 239
Sep 3 20:33:18 localhost kernel: vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
Sep 3 20:33:18 localhost kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.87 Tue Aug 21 12:33:05 PDT 2018 (using threaded interrupts)
Sep 3 20:33:18 localhost kernel: nvidia 0000:01:00.0: irq 144 for MSI/MSI-X
Sep 3 20:33:18 localhost kernel: ACPI Warning: _SB
.PCI0.PEG0.PEGP.DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
Sep 3 20:33:18 localhost kernel: ACPI Warning: _SB
.PCI0.PEG0.PEGP.DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
Sep 3 20:33:18 localhost kernel: ACPI Warning: _SB
.PCI0.PEG0.PEGP.DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
Sep 3 20:33:18 localhost kernel: ACPI Warning: _SB
.PCI0.PEG0.PEGP.DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
Sep 3 20:33:18 localhost kernel: ACPI Warning: _SB
.PCI0.PEG0.PEGP.DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
Sep 3 20:33:18 localhost kernel: ACPI Warning: _SB
.PCI0.PEG0.PEGP.DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
Sep 3 20:33:18 localhost kernel: ACPI Warning: _SB
.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
Sep 3 20:33:22 localhost kernel: NVRM: failed to copy vbios to system memory.
Sep 3 20:33:22 localhost kernel: NVRM: RmInitAdapter failed! (0x30:0xffff:663)
Sep 3 20:33:22 localhost kernel: NVRM: rm_init_adapter failed for device bearing minor number 0

I shall now create the topic and figure out how to attach the .gz file with all of the relevant info.

Dear NVidia Support,
I am having an issue with attaching the tar.gz file. It is 215 MB in size. It contains all of the relevant rpm files for my bumblebee, bumblebee-nividia, and bbswitch versions that have helped me isolate the issue and other supporting documents. I have selected the paperclip above and selected it, but it does not appear to upload on this webpage. How may I send it to you?
Thank you in advance for assisting me in resolving this issue.

Dear NVidia Support,
The above mentioned tar.gz file also contains the required nvidia-bug-report.log.gz file. How may I attach it.
BTW, I am unable to get this website login to work via Chrome. I am using Firefox instead.

Sep 3 18:09:37 localhost kernel: NVRM: The NVIDIA probe routine was not called for 1 device(s).
Sep 3 18:09:37 localhost kernel: NVRM: This can occur when a driver such as: #012NVRM: nouveau, rivafb, nvidiafb or rivatv #012NVRM: was loaded and obtained ownership of the NVIDIA device(s).

You have to blacklist nouveau.

Dear NVidia Support,
Thank you for your reply. I had already blacklisted nouveau. I researched the issue and I rebuilt a new bumblebee rpm that includes patches that resolve the error above, which was caused by xpra-backend being installed, but not the xpra-backend branch of bumblebee being incorporated into my previous bumblebee rpm build. I have resolved this issue with my current bumblebee.rpm.
How may I attached the .gz file with all of the relevant supporting documents and rpms? It is around 215 MB in size. Most of the file size is because of the nvidia driver (390.87) is inside the src.rpm and rpm for bumblebee_nvidia related rpms. Is this file size too large?
Here are my current results, which still have the issue below from kernel.log:

Sep 5 19:57:07 new-host-2 kernel: PM: Preparing system for mem sleep
Sep 5 19:57:07 new-host-2 kernel: Freezing user space processes … (elapsed 0.196 seconds) done.
Sep 5 19:57:07 new-host-2 kernel: Freezing remaining freezable tasks … (elapsed 0.001 seconds) done.
Sep 5 19:57:07 new-host-2 kernel: PM: Entering mem sleep
Sep 5 19:57:07 new-host-2 kernel: Suspending console(s) (use no_console_suspend to debug)
Sep 5 19:57:07 new-host-2 kernel: bbswitch_nv: resuming
Sep 5 19:57:07 new-host-2 kernel: e1000e: EEE TX LPI TIMER: 00000011
Sep 5 19:57:07 new-host-2 kernel: i801_smbus 0000:00:1f.4: BIOS is accessing SMBus registers
Sep 5 19:57:07 new-host-2 kernel: i801_smbus 0000:00:1f.4: Driver SMBus register access inhibited
Sep 5 19:57:07 new-host-2 kernel: PM: suspend of devices complete after 657.904 msecs
Sep 5 19:57:07 new-host-2 kernel: PM: late suspend of devices complete after 11.005 msecs
Sep 5 19:57:07 new-host-2 kernel: e1000e 0000:00:1f.6: System wakeup enabled by ACPI
Sep 5 19:57:07 new-host-2 kernel: xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
Sep 5 19:57:07 new-host-2 kernel: PM: noirq suspend of devices complete after 126.889 msecs
Sep 5 19:57:07 new-host-2 kernel: ACPI: Preparing to enter system sleep state S3
Sep 5 19:57:07 new-host-2 kernel: PM: Saving platform NVS memory
Sep 5 19:57:07 new-host-2 kernel: Disabling non-boot CPUs …
Sep 5 19:57:07 new-host-2 kernel: smpboot: CPU 1 is now offline
Sep 5 19:57:07 new-host-2 kernel: smpboot: CPU 2 is now offline
Sep 5 19:57:07 new-host-2 kernel: smpboot: CPU 3 is now offline
Sep 5 19:57:07 new-host-2 kernel: smpboot: CPU 4 is now offline
Sep 5 19:57:07 new-host-2 kernel: Broke affinity for irq 140
Sep 5 19:57:07 new-host-2 kernel: smpboot: CPU 5 is now offline
Sep 5 19:57:07 new-host-2 kernel: Broke affinity for irq 139
Sep 5 19:57:07 new-host-2 kernel: smpboot: CPU 6 is now offline
Sep 5 19:57:07 new-host-2 kernel: smpboot: CPU 7 is now offline
Sep 5 19:57:07 new-host-2 kernel: ACPI: Low-level resume complete
Sep 5 19:57:07 new-host-2 kernel: PM: Restoring platform NVS memory
Sep 5 19:57:07 new-host-2 kernel: Enabling non-boot CPUs …
Sep 5 19:57:07 new-host-2 kernel: smpboot: Booting Node 0 Processor 1 APIC 0x2
Sep 5 19:57:07 new-host-2 kernel: CPU1 is up
Sep 5 19:57:07 new-host-2 kernel: smpboot: Booting Node 0 Processor 2 APIC 0x4
Sep 5 19:57:07 new-host-2 kernel: CPU2 is up
Sep 5 19:57:07 new-host-2 kernel: smpboot: Booting Node 0 Processor 3 APIC 0x6
Sep 5 19:57:07 new-host-2 kernel: CPU3 is up
Sep 5 19:57:07 new-host-2 kernel: smpboot: Booting Node 0 Processor 4 APIC 0x1
Sep 5 19:57:07 new-host-2 kernel: CPU4 is up
Sep 5 19:57:07 new-host-2 kernel: smpboot: Booting Node 0 Processor 5 APIC 0x3
Sep 5 19:57:07 new-host-2 kernel: CPU5 is up
Sep 5 19:57:07 new-host-2 kernel: smpboot: Booting Node 0 Processor 6 APIC 0x5
Sep 5 19:57:07 new-host-2 kernel: CPU6 is up
Sep 5 19:57:07 new-host-2 kernel: smpboot: Booting Node 0 Processor 7 APIC 0x7
Sep 5 19:57:07 new-host-2 kernel: CPU7 is up
Sep 5 19:57:07 new-host-2 kernel: ACPI: Waking up from system sleep state S3
Sep 5 19:57:07 new-host-2 kernel: xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
Sep 5 19:57:07 new-host-2 kernel: PM: noirq resume of devices complete after 155.935 msecs
Sep 5 19:57:07 new-host-2 kernel: PM: early resume of devices complete after 9.237 msecs
Sep 5 19:57:07 new-host-2 kernel: bbswitch_nv: suspending
Sep 5 19:57:07 new-host-2 kernel: e1000e 0000:00:1f.6: System wakeup disabled by ACPI
Sep 5 19:57:07 new-host-2 kernel: mei_me 0000:00:16.0: irq 130 for MSI/MSI-X
Sep 5 19:57:07 new-host-2 kernel: nvme 0000:3e:00.0: irq 131 for MSI/MSI-X
Sep 5 19:57:07 new-host-2 kernel: rtc_cmos 00:02: System wakeup disabled by ACPI
Sep 5 19:57:07 new-host-2 kernel: snd_hda_intel 0000:00:1f.3: irq 132 for MSI/MSI-X
Sep 5 19:57:07 new-host-2 kernel: xhci_hcd 0000:00:14.0: port 13 resume PLC timeout
Sep 5 19:57:07 new-host-2 kernel: xhci_hcd 0000:00:14.0: port 12 resume PLC timeout
Sep 5 19:57:07 new-host-2 kernel: xhci_hcd 0000:00:14.0: port 8 resume PLC timeout
Sep 5 19:57:07 new-host-2 kernel: e1000e 0000:00:1f.6: irq 133 for MSI/MSI-X
Sep 5 19:57:07 new-host-2 kernel: nvme 0000:3e:00.0: irq 131 for MSI/MSI-X
Sep 5 19:57:07 new-host-2 kernel: nvme 0000:3e:00.0: irq 134 for MSI/MSI-X
Sep 5 19:57:07 new-host-2 kernel: nvme 0000:3e:00.0: irq 135 for MSI/MSI-X
Sep 5 19:57:07 new-host-2 kernel: nvme 0000:3e:00.0: irq 136 for MSI/MSI-X
Sep 5 19:57:07 new-host-2 kernel: nvme 0000:3e:00.0: irq 137 for MSI/MSI-X
Sep 5 19:57:07 new-host-2 kernel: nvme 0000:3e:00.0: irq 138 for MSI/MSI-X
Sep 5 19:57:07 new-host-2 kernel: nvme 0000:3e:00.0: irq 141 for MSI/MSI-X
Sep 5 19:57:07 new-host-2 kernel: nvme 0000:3e:00.0: irq 142 for MSI/MSI-X
Sep 5 19:57:07 new-host-2 kernel: usb 1-8: reset high-speed USB device number 2 using xhci_hcd
Sep 5 19:57:07 new-host-2 kernel: thinkpad_acpi: EC reports that Thermal Table has changed
Sep 5 19:57:07 new-host-2 kernel: usb 1-9: reset full-speed USB device number 3 using xhci_hcd
Sep 5 19:57:07 new-host-2 kernel: psmouse serio1: synaptics: queried max coordinates: x […5676], y […4754]
Sep 5 19:57:07 new-host-2 kernel: psmouse serio1: synaptics: queried min coordinates: x [1266…], y [1100…]
Sep 5 19:57:07 new-host-2 kernel: thinkpad_acpi: EC reports that Thermal Table has changed
Sep 5 19:57:07 new-host-2 kernel: usb 1-13: reset low-speed USB device number 4 using xhci_hcd
Sep 5 19:57:07 new-host-2 kernel: usb 1-14: reset full-speed USB device number 5 using xhci_hcd
Sep 5 19:57:07 new-host-2 kernel: PM: resume of devices complete after 1671.362 msecs
Sep 5 19:57:07 new-host-2 kernel: PM: Finishing wakeup.
Sep 5 19:57:07 new-host-2 kernel: bbswitch_nv: resuming
Sep 5 19:57:07 new-host-2 kernel: Restarting tasks … done.
Sep 5 19:57:08 new-host-2 kernel: e1000e: enp0s31f6 NIC Link is Down
Sep 5 19:57:08 new-host-2 kernel: IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
Sep 5 19:57:08 new-host-2 kernel: [drm] RC6 on
Sep 5 19:57:08 new-host-2 kernel: e1000e 0000:00:1f.6: irq 133 for MSI/MSI-X
Sep 5 19:57:08 new-host-2 kernel: e1000e 0000:00:1f.6: irq 133 for MSI/MSI-X
Sep 5 19:57:08 new-host-2 kernel: IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
Sep 5 19:57:08 new-host-2 kernel: IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
Sep 5 19:57:08 new-host-2 kernel: IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
Sep 5 19:57:08 new-host-2 kernel: IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
Sep 5 19:57:08 new-host-2 kernel: IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
Sep 5 19:57:10 new-host-2 kernel: psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
Sep 5 19:57:11 new-host-2 kernel: psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
Sep 5 19:57:12 new-host-2 kernel: input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input15
Sep 5 19:57:12 new-host-2 kernel: IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
Sep 5 19:57:13 new-host-2 kernel: wlp4s0: authenticate with a0:21:b7:61:d6:e2
Sep 5 19:57:13 new-host-2 kernel: wlp4s0: send auth to a0:21:b7:61:d6:e2 (try 1/3)
Sep 5 19:57:13 new-host-2 kernel: wlp4s0: authenticated
Sep 5 19:57:13 new-host-2 kernel: wlp4s0: associate with a0:21:b7:61:d6:e2 (try 1/3)
Sep 5 19:57:13 new-host-2 kernel: wlp4s0: RX AssocResp from a0:21:b7:61:d6:e2 (capab=0x11 status=0 aid=8)
Sep 5 19:57:13 new-host-2 kernel: wlp4s0: associated
Sep 5 19:57:13 new-host-2 kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
Sep 5 20:07:33 new-host-2 kernel: fuse init (API version 7.22)
Sep 5 20:07:33 new-host-2 kernel: bbswitch_nv: suspending
Sep 5 20:07:33 new-host-2 kernel: bbswitch_nv: resuming
Sep 5 20:07:36 new-host-2 kernel: rfkill: input handler disabled
Sep 5 20:08:35 new-host-2 kernel: bbswitch_nv: suspending
Sep 5 20:08:35 new-host-2 kernel: bbswitch_nv: resuming
Sep 5 20:08:38 new-host-2 kernel: TCP: lp registered
Sep 5 20:11:06 new-host-2 kernel: bbswitch_nv: suspending
Sep 5 20:11:06 new-host-2 kernel: bbswitch_nv: resuming
Sep 5 20:11:06 new-host-2 kernel: bbswitch_nv: suspending
Sep 5 20:11:06 new-host-2 kernel: bbswitch_nv: resuming
Sep 5 20:11:06 new-host-2 kernel: nvidia-nvlink: Nvlink Core is being initialized, major device number 239
Sep 5 20:11:06 new-host-2 kernel: vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
Sep 5 20:11:06 new-host-2 kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.87 Tue Aug 21 12:33:05 PDT 2018 (using threaded interrupts)
Sep 5 20:11:06 new-host-2 kernel: nvidia 0000:01:00.0: irq 144 for MSI/MSI-X
Sep 5 20:11:06 new-host-2 kernel: ACPI Warning: _SB_.PCI0.PEG0.PEGP.DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
Sep 5 20:11:06 new-host-2 kernel: ACPI Warning: _SB
.PCI0.PEG0.PEGP.DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
Sep 5 20:11:06 new-host-2 kernel: ACPI Warning: _SB
.PCI0.PEG0.PEGP.DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
Sep 5 20:11:06 new-host-2 kernel: ACPI Warning: _SB
.PCI0.PEG0.PEGP.DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
Sep 5 20:11:06 new-host-2 kernel: ACPI Warning: _SB
.PCI0.PEG0.PEGP.DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
Sep 5 20:11:06 new-host-2 kernel: ACPI Warning: _SB
.PCI0.PEG0.PEGP.DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
Sep 5 20:11:06 new-host-2 kernel: ACPI Warning: _SB
.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
Sep 5 20:11:10 new-host-2 kernel: NVRM: failed to copy vbios to system memory.
Sep 5 20:11:10 new-host-2 kernel: NVRM: RmInitAdapter failed! (0x30:0xffff:663)
Sep 5 20:11:10 new-host-2 kernel: NVRM: rm_init_adapter failed for device bearing minor number 0

20180905 bbswitch-0.9_bumblebee-3.3.0-4_bumblebee-nvidia-390.87_build_results.tar.gz (1.51 MB)

Dear NVidia Support,
I just uploaded the comment above a tar.gz file with the text files, including the bug report.gz. It is still scanning. I shall now try to upload a tar.gz file with the relevant rpms. The remaining rpms may be downloaded from:

https://www.linux.ncsu.edu/bumblebee/

following the directions for installing the repositories.

I have disabled SELinux to help me debug the issue because of an issue with the SELinux rpm for this build of bumblebee.

Dear NVidia Support,
I am unable to upload the tar.gz file with the relevant rpms. I suspect that this is because of file size limitations. It is 213 MB in size. I am now uploading a tar.gz file without the bumblebee-nvidia rpms with driver 390.87. Here is the link to the corresponding bumblebee issue report:

20180905 Bumblebee some relevant rpms.tar.gz (251 KB)

It’s sufficient to just provide the nvidia-bug-report.log.gz, anything else doesn’t help. Looking at the logs reaching back nearly 1.5 years, this device never worked across many kernel and driver versions. Taking this into account, I suppose it’s simply broken.
Things to try if you’re not willing to give up:

  • Upgrade to kernel-alt, should give you some 4.x kernel
  • Use kernel parameters
acpi_osi=! acpi_osi="Windows 2009"
  • Remove bumblebee and the nvidia driver, thus switching to nouveau. Then use kernel parameters
nouveau.debug=debug,VBIOS=trace

Reboot, afterwards run dmesg >dmesg.txt and attach that.

Dear generix,
Thank you for your assistance.
The kernel parameters:

acpi_osi=! acpi_osi=“Windows 2009”

with the bumblebee and bumblebee_nvidia driver did not work. I received the same error message as above.
I shall now attach the dmesg.txt file created after following your instructions above with the stock Centos 7.5 kernel I used above.
I shall then try installing the bumblebee and bumblebee_nvidia driver after installing the kernel-ml packages form elrepo and report back.
Thank you again for your assistance.
20190907_dmesg.txt (221 KB)

Dear generix,
I installed the kernel-ml 4.18.6-1 from elrepo and then erased and installed bumblebee, bumblebee-nvidia and bbswitch-dkms, and then executed sudo dracut --regenerate-all --force, and then rebooted.
This has resolved the issue. I am now able to run optirun glxgears and use the nvidia driver.
I shall now attach the tar.gz file with the documentation of this result and the bumblebee-nvidia.spec file for building the rpms for the 390.87 version of your driver, since the file size limitations prevent one from attaching the src.rpm and rpm files for these builds.
We now have a fix for getting bumblebee and the nvidia drivers to work with Centos 7.5 on a Lenovo Thinkpad P50.
Thank you very much for your assistance.

20180909 bbswitch-0.9_bumblebee-3.3.0-4_bumblebee-nvidia-390.87_kernel-4.18.6.tar.gz (1.69 MB)