Hello,
I am trying to make the IMX185 Camera work with the Sprocket Carrier.
There is not really an installation instruction, but it seems that the sprocket carrier BSP should support the IMX185.
--------------------------------------------------------------------------------
ASG008 (Sprocket)
--------------------------------------------------------------------------------
-USB Support
-IMX274 CSI Camera Support
-IMX185 CSI Camera Support
But it is not detected?
It should show up under /dev/video0 right?
Hi johannes.selymes,
Connect Tech may have the IMX185 and IMX274 driver for Sprocket carrier board. Please check with them.
Yes I found that there is a driver. It is possible to download the whole Jetson firmware with the driver.
Now the camera is detected, but I still cant manage to get nvgstcapture-1.0 working.
[ 3961.279727] imx185 2-001a: imx185_s_stream++ enable 0
[ 3961.286583] tegra-i2c 3180000.i2c: no acknowledge from address 0x1a
[ 3961.305313] imx185 2-001a: imx185_power_off: power off
(Argus) Error EndOfFile: Unexpected error in reading socket (in src/rpc/socket/client/ClientSocketManager.cpp, function recvThreadCore(), line 214)
(Argus) Error EndOfFile: Receiving thread terminated with error (in src/rpc/socket/client/ClientSocketManager.cpp, function recvThreadWrapper(), line 317)
There seems to be this error.