meet'Failed flashing generic' when flash jetson AGX Orin devkit

Robotics & Edge Computing Jetson & Embedded Systems Jetson AGX Orin
1

Hi,
I download driver and rootfs from Jetson Linux | NVIDIA Developer.
Then I follow quick start to flash:Quick Start — NVIDIA Jetson Linux Developer Guide 1 documentation,
run sudo ./flash.sh jetson-agx-orin-devkit internal.
However I failed to flash, here is log.
log.txt (52.5 KB)
It can recognize my dev correctly in the beginning:
[ 12.2483 ] tegrarcm_v2 --chip 0x23 0 --ismb2
[ 12.2489 ] Rebooting to recovery mode
[ 12.2494 ] tegrarcm_v2 --chip 0x23 0 --reboot recovery
Board ID(3701) version(501) sku(0005) revision(G.0)

but look like later it can not recognize ?
[ 4.6152 ] Sending bct_br
[ 4.6586 ] ERROR: might be timeout in USB write.
Error: Return value 3
Command tegrarcm_v2 --new_session --chip 0x23 0 --uid --download bct_br br_bct_BR.bct --download mb1 mb1_t234_prod_aligned_sigheader.bin.encrypt --download psc_bl1 psc_bl1_t234_prod_aligned_sigheader.bin.encrypt --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt
Failed flashing generic.

3

Hi,
These seem irrelevant to my problem

5

I find that is why I use virtualbox, using ubuntu pc is normal.
Thanks.

6

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.