Hi, I am using CX456A Mellanox 100G cards. I have two cards. in one card Link local address is configuring after boot automatically. But on other card it is not happening. Any configuration parameter need to set ? enp9s0f0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::e61d:2df…

Mellanox 100G CX456A not autoconfiguring link local ipv6 address

aviap April 24, 2017, 2:08pm 2

all is well that ends well…:-)

Topic		Replies	Views
IPv6 ping failing between two mellanox cards Ethernet Adapter Cards	0	326	April 21, 2017
link down and ip address lost with mellanox ofed 100G card Ethernet Adapter Cards	4	424	July 11, 2017
ConnectX-2: mlx4_en: Port: 1, invalid mac burned: 0x0, quiting Mellanox OFED define	21	1504	April 23, 2013
No link detected with ConnectX-4 Lx Ethernet Adapter Cards ethernet , ethtool , flint , mlxlink	1	625	March 25, 2025
How to get Mellanox ConnectX-6 Dx cards to work in Supermicro server Ethernet Adapter Cards	2	481	August 21, 2024
What to do for Back-to-Back ConnectX-4 LX? Link-State is UP but no IP-Communication on Windows Server 2019. Ethernet Adapter Cards	3	618	March 26, 2020
Connect X-6 card LED not turning on and ports are down always InfiniBand/VPI Adapter Cards	3	495	August 13, 2024
My ConnectX does not send or receive ethernet packets anymore Adapters and Cables	7	1076	April 26, 2019
Trouble getting CX416A 100G link up Adapters and Cables mst , mlxlink	2	760	January 21, 2019
MCX512A-ACAT problems with link status and ethtool on Centos 7 Ethernet Adapter Cards	1	1906	October 29, 2021