MGBE (10G) AQR113C can not work on my custom carrier board

for my Custom board (I designed it myself)

I checked the following items, but the MGBE (10G) of the carrier board does not work at all, so I would like to ask what additional items need to be checked.

  1. I checked the clock and signals
  • MGBE Reference clock (156.25MHz) is OK
  • XTAL clock (50MHz) is OK
  1. Marvell Firmware (AQR113C) is loaded OK
  2. I attached is Demesg.
    dmesg_log.txt (67.0 KB)

https://docs.nvidia.com/jetson/archives/r35.5.0/DeveloperGuide/HR/JetsonModuleAdaptationAndBringUp/JetsonAgxOrinSeries.html?highlight=mgbe#for-phy

Please refer to.

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.