# MIPI clock debug logs

**URL:** <https://forums.developer.nvidia.com/t/mipi-clock-debug-logs/351351>\
**Category:** Jetson Nano\
**Tags:** clock, csi\
**Created:** [November 13, 2025, 11:46pm UTC](https://forums.developer.nvidia.com/t/mipi-clock-debug-logs/351351 "2025-11-13T23:46:10Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![kimberly.carvajal](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/kimberly.carvajal/32/333825_2.png) [@kimberly.carvajal](https://forums.developer.nvidia.com/u/kimberly.carvajal)\
**Post date:** [November 13, 2025, 11:46pm UTC](https://forums.developer.nvidia.com/t/mipi-clock-debug-logs/351351/1 "2025-11-13T23:46:10Z")

</div>

Hi,

I am working with a MIPI sensor and I was able to enable the trace logs but it shows that there is no MIPI information.

```auto
 kworker/5:2-135 [005] ....... 60098.706191: rtcpu_string: tstamp:1878924963882 id:0x04010000 str:"VM0 activating."
 kworker/5:2-135 [005] ....... 60098.762191: rtcpu_vinotify_event: tstamp:1878925703571 cch:0 vi:1 tag:VIFALC_TDSTATE channel:0x23 frame:0 vi_tstamp:60125605550176 data:0x799e300010000000
 kworker/5:2-135 [005] ....... 60098.762193: rtcpu_vinotify_event: tstamp:1878925703798 cch:0 vi:1 tag:VIFALC_TDSTATE channel:0x23 frame:0 vi_tstamp:60125605607104 data:0x0000000031000001
 kworker/5:2-135 [005] ....... 60098.762193: rtcpu_vinotify_event: tstamp:1878925704045 cch:0 vi:1 tag:VIFALC_TDSTATE channel:0x23 frame:0 vi_tstamp:60125605625280 data:0x799e2d0010000000
 kworker/5:2-135 [005] ....... 60098.762194: rtcpu_vinotify_event: tstamp:1878925704258 cch:0 vi:1 tag:VIFALC_ACTIONLST channel:0x23 frame:0 vi_tstamp:60125605645600 data:0x0000000007020001
 kworker/5:2-135 [005] ....... 60098.762195: rtcpu_vinotify_event: tstamp:1878925704497 cch:0 vi:1 tag:VIFALC_TDSTATE channel:0x23 frame:0 vi_tstamp:60125605687968 data:0x0000000031000002

vi-output, latt-4784 [003] … 60101.375200: tegra_channel_capture_setup: vnc_id 0 W 640 H 512 fmt c4

```

We want to check if the Jetson is receiving the MIPI clock, is there a debug option for this?  
We would like to monitor only the CSI clock.

Thanks!

---

<div class="post-metadata">

**Author:** ![JerryChang](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/jerrychang/32/14043_2.png) [@JerryChang](https://forums.developer.nvidia.com/u/JerryChang)\
**Post date:** [November 14, 2025, 3:16am UTC](https://forums.developer.nvidia.com/t/mipi-clock-debug-logs/351351/3 "2025-11-14T03:16:45Z")

</div>

hello kimberly.carvajal,

may I double check.. you’re working with Jetson Orin Nano , right?  
what’s the Jetpack release version you’re using?  
you may see-also [Topic 326038](https://forums.developer.nvidia.com/t/326038/28/), you may try to apply camera firmware with debug flag enabled for JetPack-6.2/l4t-r36.4.3.

---

<div class="post-metadata">

**Author:** ![system](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/system/32/68080_2.png) [@system](https://forums.developer.nvidia.com/u/system)\
**Post date:** [December 16, 2025, 5:10am UTC](https://forums.developer.nvidia.com/t/mipi-clock-debug-logs/351351/5 "2025-12-16T05:10:29Z")

</div>

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.