MLNX_OFED_LINUX-2.0-2.0.5 kernel modules not loading

Hi All,

I’ve successfully compiled and installed the MLNX_OFED 2.0 stack on my SLES system which has a Connect-X3 VPI card connected to a SX6036 switch. For some reason i cannot start the IB. I have seen a number of posts on this forum but nothing conclusive to resolve the matter. Any assistance would be appreciated.

OS: SLES11 SP2

Kernel: 3.0.80-0.7-default

host001# /etc/init.d/openibd start

Loading Mellanox HCA driver: [FAILED]

Loading Mellanox MLX4 HCA driver: [FAILED]

Loading Mellanox MLX4_IB HCA driver: [FAILED]

Loading Mellanox MLX4_EN HCA driver: [FAILED]

Loading QLogic QIB driver: [FAILED]

Loading cxgb3 driver: [FAILED]

Loading cxgb4 driver: [FAILED]

Loading nes driver: [FAILED]

Loading HCA driver and Access Layer: [FAILED]

Thank you.

Hi Timothy, Sorry for late respond; i hope it is still relevant.

try using this driver http://www.mellanox.com/page/mlnx_ofed_eula?mtag=linux_sw_drivers&mrequest=downloads&mtype=ofed&mver=MLNX_OFED-2.0-3.0.0&mname=MLNX_OFED_LINUX-2.0-3.0.0-sles11sp2-x86_64.tgz - it is already compiled for Sles11SP2. all you need is to run the install script (assuming you work with the default kernel).

let me know if it worked.